Possible mystery - first clue

Sajen · 10th December 2014, 07:56 AM

Hello Dave,

please post the dimensions from the chopper and the thickness of the blade, this will be very helpful.

Regards,
Detlef

DaveA · 10th December 2014, 04:39 PM

OAL is 33 1/2 inches

Blade length is 19 inches

Blade thickness is 5/16th inch with distal taper to 1/8th inch

Blade width is 1 1/2 inch at base and 2 5/8 inch at the widest point of the bulge along the backside.

The edge is sharp along the straight edge on through the curve up to the tip.

The blade cross section is full flat with a flat grind (on both sides).

This is a very solid and relatively heavy weapon. I've no doubt it would find good use chopping in the fields or in battle.

I will post some close up pictures soon.

Best,

Dave A.

10th December 2014, 04:39 PM	#2
DaveA Member Join Date: Apr 2007 Location: Wisconsin, USA Posts: 416	Dimensions of the sword OAL is 33 1/2 inches Blade length is 19 inches Blade thickness is 5/16th inch with distal taper to 1/8th inch Blade width is 1 1/2 inch at base and 2 5/8 inch at the widest point of the bulge along the backside. The edge is sharp along the straight edge on through the curve up to the tip. The blade cross section is full flat with a flat grind (on both sides). This is a very solid and relatively heavy weapon. I've no doubt it would find good use chopping in the fields or in battle. I will post some close up pictures soon. Best, Dave A.

10th December 2014, 07:56 AM	#1
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 9,207	Hello Dave, please post the dimensions from the chopper and the thickness of the blade, this will be very helpful. Regards, Detlef