Wooden Igorot shield

[Battara]

I agree with Sajen that it is beginning of the 20 century and Bontoc tribe (one of the Igorot tribes).

[Pieje]

Thanks!
This reinforcing is a sort of iron web on both sides of the shield.

[Indianajones]

Hello Pieje, wel actually -as I am a long time collector of N.-Philippine tribal art- this however typically looking Bontoc-Igorot shield could firstly be older than expected; I reckognise the yellowishness of the wood and it is probably very dry; it may be slightly older than 1900.
Interesting enough your shield has a few 'features' I have not seen before! 1. is the 'strange' lashing. Normally these shields have a woven rattanband -like yours has- running accross and fixated with (only) criscross going 'stitches'. Yours has a sort of praralel running rattanlines also (above n below)
2. the very ends of each projection or 'legs' have notches carved in them.

The tribal name for these shields is 'kalasag' , which name surprisingly is shared by almost all tribes in Luzon.

The 'damaged' sides of the shield are actually a good sign of authentic use. During wartime (before and/or after) all warriors would celebrate and while walking in a row tap with a stick on the sides of their shield. These shields where therefore also sometimes reffered to 'gaklab' ; sound of tapping on the shields.

Because of these features I suspect your shield could also be from South -Kalinga tribe (North of Bontoc). I also have -now I remember- a set of Mother of pearlornaments which also show these carved notches on the sides.

congrats with this nice shield.Best,

[Pieje]

Thanks for this very detailed reply, I appreciate. Nice to know it’s very likely a good piece. Circa 1900 is much more than I expected.
Any idea about the iron wiring on both edges?

[Indianajones]

The iron additions are probably of American soldier items (perhaps the iron innerwork of military verhicletires??) which they got hold of -including the nails- and added to the shield to protect it extra from the sides from blows of headaxes.
Although the South Kalinga's and Bontocs have lots in (cultural) common, they are also since early times (headhunting/killing) enemies from eachother.
I suppose these additions were done AFTER the actual manufacture of the shield? They are in any way certainly very practical in the sense of warfare and actual war-use of the shield.
Glad to help
(I'l look up n post a picture of a South Kalinga which is stored in my other comp. soon)

[Pieje]

Thanks.
Yes, the iron reinforcing seems to be done later, nails are only used at the edge to keep the iron wiring in place. The wood is indeed very dry and light. The shield measures 86cm in height.

[Indianajones]

Picture of South Kalinga with the 'governor' at right (written in white at border) holding a shield and a headaxe.
It says 'Lubuagan Kalinga' underneath which is a town actually between the North and South Kalinga (-influence zone). This town is also along the (only) road from Bontoc (tribe and town) into the Kalinga territory and any military "activity" coming from the South would have used this road (; source of iron/foreign material).
The North Kalinga use a different and quite more elegant type of shield; slender, long and with a diamondshaped 'bud' at the front.

Now all you need is a headaxe aand a spear and your 'Do-it-yourself headhunting set' is complete

Another detail; the reason why the left part of the griphole is larger than the right is because a warrior would hold these shields using only the middle three fingers (left hand; right hand is for holding the headaxe), leaving the tiny and the thumb outside for easy tilting the shield foreward/backwards when dualing. This is why sometimes there is a shiny spot in the "NorthEastern' direction above the grip.

Several of the shields I own also show tiny elongated triangular cuts/piercings in the wood on the front, which have been made by blows of headaxes.

Best,

[Sajen]

Originally Posted by Indianajones

Picture of South Kalinga with the 'governor' at right (written in white at border) holding a shield and a headaxe.
It says 'Lubuagan Kalinga' underneath which is a town actually between the North and South Kalinga (-influence zone). This town is also along the (only) road from Bontoc (tribe and town) into the Kalinga territory and any military "activity" coming from the South would have used this road (; source of iron/foreign material).
The North Kalinga use a different and quite more elegant type of shield; slender, long and with a diamondshaped 'bud' at the front.

Now all you need is a headaxe aand a spear and your 'Do-it-yourself headhunting set' is complete

Another detail; the reason why the left part of the griphole is larger than the right is because a warrior would hold these shields using only the middle three fingers (left hand; right hand is for holding the headaxe), leaving the tiny and the thumb outside for easy tilting the shield foreward/backwards when dualing. This is why sometimes there is a shiny spot in the "NorthEastern' direction above the grip.

Several of the shields I own also show tiny elongated triangular cuts/piercings in the wood on the front, which have been made by blows of headaxes.

Best,

Interesting informations! Now I know why every time the griphole on the left is larger, by my example as well!

Again, a very nice shield!

Regards,

Detlef

[Pieje]

Thanks for this thorough and inspiring info!

Originally Posted by Indianajones

Now all you need is a headaxe and a spear and your 'Do-it-yourself headhunting set' is complete

To be honest, I went to buy some African swords when I saw that shield and I particularly liked it. So I bought it, relatively cheap, without knowing anything about it, thought it was African
But knowing I have an old and authentic Bontoc Igorot reinforced war shield showing traces of use during wartime made my day. Perhaps I'll have a look for an axe.