Does cleaning a keris hurt overall value or patina?

Sajen · 12th January 2011, 08:09 PM

Hello Dave,

in this thread: http://www.vikingsword.com/vb/showthread.php?t=11844 I show the restoration of one keris from my collection and you will find there a discussion about restoration in general as well.

Regards,

Detlef

dave78 · 13th January 2011, 02:35 AM

It is with great care and consideration, and after reading all the

responses, that I have decided to clean the blade only and let the rest

of it grow old gracefully. I like to think of the slight dirt on the

hilt, which has a greyish appearance, not as mere dirt but as grey hair

on a well traveled, old wise man, which (in my opinion) helps gives the

piece character.

My belief is that the time and diligence put into this will serve to

honour the original maker and spirits, as well as my grandfather from

whom I inherited it, and my hope is that they would approve of my

decision.

Once again, thank you all for your thoughtful and meaningful comments,

and expertise.

Henk · 13th January 2011, 04:32 PM

Dave,

I think you should clean the dress of your keris so that the grey layer disappears. You certainly will not honour the maker and spirits by neglecting the house of the keris. If i come home i don't feel comfortable when the house is dirty with everwhere layers of dust. The spirits of the keris and the maker will think the same way.
Your grandfather? I don't know. If the dirt on the keris reminds you of your grandfather and i mean the fact that his hands touched that surface and you want to preserve that memory, fine.
But if you want to do justice to the keris, clean it!!

David · 13th January 2011, 04:47 PM

Quote:

Originally Posted by Henk

Dave,

I think you should clean the dress of your keris so that the grey layer disappears. You certainly will not honour the maker and spirits by neglecting the house of the keris. If i come home i don't feel comfortable when the house is dirty with everwhere layers of dust. The spirits of the keris and the maker will think the same way.
Your grandfather? I don't know. If the dirt on the keris reminds you of your grandfather and i mean the fact that his hands touched that surface and you want to preserve that memory, fine.
But if you want to do justice to the keris, clean it!!

I do have to agree here. Dirt is not patina and cleaning the dirt from the dress will not destroy the patina, only enhance it.
Personally i would use some wood oil to clean it up and keep the wood from drying out. This will help preserve the dress and prevent further cracking. I also use a bit of Butcher's Wax as a protection for the surface afterwards. Gives the wood a nice low luster look as well.

Sajen · 13th January 2011, 04:57 PM

Hello Dave,

agree with Henk and David. Do you have read the thread which I have given you by link in up? Real patina you can't clean!!

Regards,

Detlef

dave78 · 14th January 2011, 07:29 AM

Well since you all agree, and, as was pointed out, because of the cultural differences, the "rules" regarding refinishing are also different as they are here in the west. I'll use all your valuable tips and clean and preserve the whole keris. This may take awhile, but I'll post pictures when I'm done.

Thanks again for all the expert advice.

David · 14th January 2011, 04:26 PM

Quote:

Originally Posted by dave78

Well since you all agree, and, as was pointed out, because of the cultural differences, the "rules" regarding refinishing are also different as they are here in the west.

Just to be clear Dave, "cleaning" and "refinishing" are not the same thing. I am less inclined to encourage anyone to "refinish" their keris dress. That would involve sanding, staining and the application of new finish to the wood. It would involve the removal of old patina. Cleaning and oiling/waxing the wood is far less invasive and preserves both the patina and the wood itself.

Mytribalworld · 14th January 2011, 06:15 PM

Quote:

Originally Posted by Sajen

Hello Dave,

agree with Henk and David. Do you have read the thread which I have given you by link in up? Real patina you can't clean!!

Regards,

Detlef

real patina you can't clean ? AAHummm?

may I give an example ? our national museum "Bronbeek" where I once visited the depots where the curator showed me a big part of the collection that was cleaned once where very old swords has turned in completely new looking stuff without patina because of the "cleaning" activety of former curators.

It suprised me a little that members give advise to "clean" while they haven't seen the keris yet....

don't unterstand me wrong, dirt is dirt and as David mentioned oil cleaning is ok, but be very carefull with other stuff like the mentioned 0000 steelwool.

first look,than think, ( than sleep a night) than think again, that act.

untouched kerisses are getting so enourmous scarce.....

Arjan

David · 14th January 2011, 07:03 PM

Quote:

Originally Posted by mandaukudi

real patina you can't clean ? AAHummm?

may I give an example ? our national museum "Bronbeek" where I once visited the depots where the curator showed me a big part of the collection that was cleaned once where very old swords has turned in completely new looking stuff without patina because of the "cleaning" activety of former curators.

It suprised me a little that members give advise to "clean" while they haven't seen the keris yet....

don't unterstand me wrong, dirt is dirt and as David mentioned oil cleaning is ok, but be very carefull with other stuff like the mentioned 0000 steelwool.

first look,than think, ( than sleep a night) than think again, that act.

untouched kerisses are getting so enourmous scarce.....

Arjan

Arjan, of course overly aggressive cleaning can eliminate patina. We must be careful and thoughtful. However i would never encourage someone to leave active rust on a keris blade nor dirt on the blade or dress as these are not patina and can be removed without damaging patina. Of course keris blades for the most part are intended to be maintained and stained to bring out their pamor patterns so i don't think that you can apply the rules of care for, say a mandau to that of a keris. It's apples and oranges really.
As for not having seen the blade yet, this is not so. We all had a chance to look and comment on Dave's new acquisition in this thread:
http://www.vikingsword.com/vb/showthread.php?t=13136
And it is really difficult to do much damage with 0000 steel wool. It will not leave scratches on your blade no matter how hard you try, though i suppose that with some effort it might remove the patina from wood.

Sajen · 14th January 2011, 07:22 PM

Quote:

Originally Posted by mandaukudi

real patina you can't clean ? AAHummm?

It suprised me a little that members give advise to "clean" while they haven't seen the keris yet....

don't unterstand me wrong, dirt is dirt and as David mentioned oil cleaning is ok, but be very carefull with other stuff like the mentioned 0000 steelwool.

first look,than think, ( than sleep a night) than think again, that act.

untouched kerisses are getting so enourmous scarce.....

Arjan

Hi Arjan,

the same advice i can give to you: First read, than think and when you need think again before attack someone!

In this case please read the post #44 in this link again:http://www.vikingsword.com/vb/showthread.php?t=11844

The same advice to read all in this thread i have given to Dave. There you can see that I not general clean all keris and that everybody have take his own desicion how to conserve his keris!

BTW, when you look at the keris (the link have given David) you will see that the sarung of the keris haven't a patina like you may think and a careful polish of the wood (this advice I have given there already) will bring out a better appearance, by this I am sure.

Regards,

Detlef

12th January 2011, 08:09 PM	#1
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 9,165	Hello Dave, in this thread: http://www.vikingsword.com/vb/showthread.php?t=11844 I show the restoration of one keris from my collection and you will find there a discussion about restoration in general as well. Regards, Detlef

13th January 2011, 02:35 AM	#2
dave78 Member Join Date: Jan 2011 Location: Canada Posts: 6	It is with great care and consideration, and after reading all the responses, that I have decided to clean the blade only and let the rest of it grow old gracefully. I like to think of the slight dirt on the hilt, which has a greyish appearance, not as mere dirt but as grey hair on a well traveled, old wise man, which (in my opinion) helps gives the piece character. My belief is that the time and diligence put into this will serve to honour the original maker and spirits, as well as my grandfather from whom I inherited it, and my hope is that they would approve of my decision. Once again, thank you all for your thoughtful and meaningful comments, and expertise.

13th January 2011, 04:32 PM	#3
Henk Member Join Date: Dec 2004 Location: The Netherlands Posts: 1,209	Dave, I think you should clean the dress of your keris so that the grey layer disappears. You certainly will not honour the maker and spirits by neglecting the house of the keris. If i come home i don't feel comfortable when the house is dirty with everwhere layers of dust. The spirits of the keris and the maker will think the same way. Your grandfather? I don't know. If the dirt on the keris reminds you of your grandfather and i mean the fact that his hands touched that surface and you want to preserve that memory, fine. But if you want to do justice to the keris, clean it!!

13th January 2011, 04:57 PM	#5
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 9,165	Hello Dave, agree with Henk and David. Do you have read the thread which I have given you by link in up? Real patina you can't clean!! Regards, Detlef

14th January 2011, 07:29 AM	#6
dave78 Member Join Date: Jan 2011 Location: Canada Posts: 6	Well since you all agree, and, as was pointed out, because of the cultural differences, the "rules" regarding refinishing are also different as they are here in the west. I'll use all your valuable tips and clean and preserve the whole keris. This may take awhile, but I'll post pictures when I'm done. Thanks again for all the expert advice.