Very Old Moro Kris

Rick · 22nd May 2005, 10:33 PM

Is this yours Ian ?
How thick is the blade at the base ?

Some observations / opinions , YMMV .

The angle on the tail of the gangya is all wrong for it to ever have had a separate piece on top .
There is an amazing lack of detail in the 'trunk' area , even providing for wear and age and it looks somehow wrong .
The pecetan and sogokan are barely hinted at , hardly even rudimentary .
On the whole this piece strikes me as a kris made by a non native source .
One more thing , the waves are clumsily executed and uneven .

A kris like object if you will .

Let me wildly speculate could this be an early trade kris made outside of the area for barter with the locals , English , American , even Spanish ?

tom hyle · 22nd May 2005, 11:27 PM

One of those blades where it's hard to tell crudity from corrosion, at least in a photo. The grooves have a forged in look? There does not look to be a seperate gonjo, and if there ever was one it must have been a straight joining, which is not usually seen on Moro pieces, but then if it's a particularly old piece......could that be a Moslem date?

Aurangzeb · 22nd May 2005, 11:40 PM

Hi all!

If that is a muslim year it translates to 1961.

Hopefully this chould help with a date.

Ian · 22nd May 2005, 11:41 PM

Rick:

It is mine -- a recent acquisition off eBay. I will add dimensions later tonight.

Here are some more pictures showing a side-by-side comparison with a more traditional old Moro kris (late 18th or early 19th C.).

Ian.

EDIT: Here are the dimensions of these two swords.

Top one (Mystery Kris)
OAL = 22.75 inches
Blade = 18 inches
Width of gangya = 3.75 inches
Thickness of blade just below handle = 3/8 inch

Bottom one (Old Moro Kris)
OAL = 21.75 inches
Blade = 17.25 inches
Width of gangya = 4 inches
Thickness of blade just below handle = 1/2 inch

Old Moro Kris with Spanish Hilt (2)

Rick · 23rd May 2005, 12:05 AM

IMO , when viewed next to that old beauty it only serves to accentuate its alieness .
Of course smiths come in all different skill levels but still it just doesn't look look 'native' to me .

A very interesting piece .

Federico · 23rd May 2005, 01:10 AM

The number could always be an accession number (hmmm...is that the right term?). Ive seen some museums do horrible things to blades they accept (well this is not something that all museums do, but well some have). Anyways, agree with Rick, there is something odd about this kris/keris, something that goes beyond just mere corrosion. It would seem that all we really have to ID this kris would be the dapur, and even given more we've had plenty of argument over the older style kris. Especially given the lack of other features (particularly no fretwork, no detail around the trunk, no detail around where the arrowhead could be if it is an arrowhead, etc...), at least for me, it would be hard to peg this kris/keris one way or the other.

nechesh · 23rd May 2005, 01:15 AM

I once again submit the Aliens Theory.

Ian · 23rd May 2005, 05:05 AM

When I put this one next to the other old Moro kris in the pictures above, it seemed to me that the gangya may actually be complete. So I polished the reverse side in the gangya area to remove some of the heavy patina. For a short distance I can identify a horizontal line meeting a section of an angled line where the gangya separation should be. It is very faint and only visible with a magnifying glass. I believe the gangya is actually intact and not missing its top half as I stated earlier. This is consistent with Moro work where the line of separation can be very hard to distinguish sometimes.

Acknowledging opinions above to the contrary, I believe this blade is just too well forged and the luks too symmetrical around the median ridge for it not to have been made in its host culture. This has not been forged by an alien group in the image of a Moro kris. What I think is throwing people off is the file work (or lack thereof), the extensive corrosion of the gangya area, and the likelihood that the gangya was modified by another hand. The "trunk" area, in particular, appears to have been filed down and altered.

Rick: I can't find my calipers to measure the thickness of the blade. Will get back to you when I locate them.

Ian.

VANDOO · 23rd May 2005, 05:08 AM

THE BLADE MAY SIMPLY BE UNFINISHED, SOMETIMES A BLADE IS PUSHED INTO USE BEFORE THE FINISHING WORK CAN BE DONE. THIS COULD HAPPEN DUE TO A DIRE NEED FOR WEAPONS AS FAST AS POSSIBLE OR PERHAPS A CHEAPER MODEL OR THE FORGE COULD HAVE FALLEN INTO ENEMY HANDS, SO FINISHED AND UNFINISHED GOODS WERE TAKEN AND MODIFIED FOR USE.
MANTERIS HAS A MORO KRIS THAT APPEARS SOMEWHAT UNFINISHED AS IT DOSENT HAVE THE CUT OUT WORK DONE ON THE GAGAH OR GRENENG. I HAVE A INDONESIAN KERIS BLADE THAT I THINK IS THE CORE WITHOUT THE PARMOR SANDWICHED ON BOTH SIDES SO IT DOES HAPPEN.

22nd May 2005, 10:33 PM	#1
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,347	Fascinating ! Is this yours Ian ? How thick is the blade at the base ? Some observations / opinions , YMMV . The angle on the tail of the gangya is all wrong for it to ever have had a separate piece on top . There is an amazing lack of detail in the 'trunk' area , even providing for wear and age and it looks somehow wrong . The pecetan and sogokan are barely hinted at , hardly even rudimentary . On the whole this piece strikes me as a kris made by a non native source . One more thing , the waves are clumsily executed and uneven . A kris like object if you will . Let me wildly speculate could this be an early trade kris made outside of the area for barter with the locals , English , American , even Spanish ?

22nd May 2005, 11:41 PM	#4
Ian Vikingsword Staff Join Date: Dec 2004 Location: The Aussie Bush Posts: 4,453	More pictures Rick: It is mine -- a recent acquisition off eBay. I will add dimensions later tonight. Here are some more pictures showing a side-by-side comparison with a more traditional old Moro kris (late 18th or early 19th C.). Ian. EDIT: Here are the dimensions of these two swords. Top one (Mystery Kris) OAL = 22.75 inches Blade = 18 inches Width of gangya = 3.75 inches Thickness of blade just below handle = 3/8 inch Bottom one (Old Moro Kris) OAL = 21.75 inches Blade = 17.25 inches Width of gangya = 4 inches Thickness of blade just below handle = 1/2 inch Old Moro Kris with Spanish Hilt (2) Last edited by Ian; 24th May 2005 at 01:59 PM. Reason: Dimensions addd for the two swords

23rd May 2005, 05:05 AM	#8
Ian Vikingsword Staff Join Date: Dec 2004 Location: The Aussie Bush Posts: 4,453	Gangya is probably intact When I put this one next to the other old Moro kris in the pictures above, it seemed to me that the gangya may actually be complete. So I polished the reverse side in the gangya area to remove some of the heavy patina. For a short distance I can identify a horizontal line meeting a section of an angled line where the gangya separation should be. It is very faint and only visible with a magnifying glass. I believe the gangya is actually intact and not missing its top half as I stated earlier. This is consistent with Moro work where the line of separation can be very hard to distinguish sometimes. Acknowledging opinions above to the contrary, I believe this blade is just too well forged and the luks too symmetrical around the median ridge for it not to have been made in its host culture. This has not been forged by an alien group in the image of a Moro kris. What I think is throwing people off is the file work (or lack thereof), the extensive corrosion of the gangya area, and the likelihood that the gangya was modified by another hand. The "trunk" area, in particular, appears to have been filed down and altered. Rick: I can't find my calipers to measure the thickness of the blade. Will get back to you when I locate them. Ian.

22nd May 2005, 11:27 PM	#2
tom hyle Member Join Date: Dec 2004 Location: Houston, TX, USA Posts: 1,254	One of those blades where it's hard to tell crudity from corrosion, at least in a photo. The grooves have a forged in look? There does not look to be a seperate gonjo, and if there ever was one it must have been a straight joining, which is not usually seen on Moro pieces, but then if it's a particularly old piece......could that be a Moslem date?

22nd May 2005, 11:40 PM	#3
Aurangzeb Member Join Date: Mar 2005 Posts: 306	Hi all! If that is a muslim year it translates to 1961. Hopefully this chould help with a date.

23rd May 2005, 12:05 AM	#5
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,347	IMO , when viewed next to that old beauty it only serves to accentuate its alieness . Of course smiths come in all different skill levels but still it just doesn't look look 'native' to me . A very interesting piece .

23rd May 2005, 01:10 AM	#6
Federico Member Join Date: Dec 2004 Location: Minneapolis, MN, USA Posts: 312	The number could always be an accession number (hmmm...is that the right term?). Ive seen some museums do horrible things to blades they accept (well this is not something that all museums do, but well some have). Anyways, agree with Rick, there is something odd about this kris/keris, something that goes beyond just mere corrosion. It would seem that all we really have to ID this kris would be the dapur, and even given more we've had plenty of argument over the older style kris. Especially given the lack of other features (particularly no fretwork, no detail around the trunk, no detail around where the arrowhead could be if it is an arrowhead, etc...), at least for me, it would be hard to peg this kris/keris one way or the other.

23rd May 2005, 01:15 AM	#7
nechesh Member Join Date: Dec 2004 Location: Cincinnati, OH Posts: 940	I once again submit the Aliens Theory.

23rd May 2005, 05:08 AM	#9
VANDOO (deceased) Join Date: Dec 2004 Location: OKLAHOMA, USA Posts: 3,138	THE BLADE MAY SIMPLY BE UNFINISHED, SOMETIMES A BLADE IS PUSHED INTO USE BEFORE THE FINISHING WORK CAN BE DONE. THIS COULD HAPPEN DUE TO A DIRE NEED FOR WEAPONS AS FAST AS POSSIBLE OR PERHAPS A CHEAPER MODEL OR THE FORGE COULD HAVE FALLEN INTO ENEMY HANDS, SO FINISHED AND UNFINISHED GOODS WERE TAKEN AND MODIFIED FOR USE. MANTERIS HAS A MORO KRIS THAT APPEARS SOMEWHAT UNFINISHED AS IT DOSENT HAVE THE CUT OUT WORK DONE ON THE GAGAH OR GRENENG. I HAVE A INDONESIAN KERIS BLADE THAT I THINK IS THE CORE WITHOUT THE PARMOR SANDWICHED ON BOTH SIDES SO IT DOES HAPPEN.