Jambiya for comments help needed

[Atlantia]

Originally Posted by kahnjar1

Hi again Gene,
I would have thought that it was more likely that the base metal would be brass rather than bronze, but you have the item to hand so can better tell. Some tips which might help re cleaning etc. These are my opinions only so "read between the lines".
Don't ever use Silvo to clean these sort of things for exactly the reason you state----residue in the etching. I usually use (I think you should be able to get it in the UK) Goddards Silver Cloth and if I really need to get into tight spots, an old toothbrush, with a SMALL bit of Goddards Silver Dip. Don't go overboard as a bit of tarnish can give the item a nice "old" look.
As far as the material section goes, I would NOT remove what is there already, as you don't know what it is holding together underneath! I would be inclined to recover it over the top.
You have asked in my post about the significance of the "onion" finials on the scabbard.
I will reply seperately on this.
Regards Stuart

The Brasso/silvo catastrophe is something that I have to admit to having mixed feelings about. If it weren't for so many good brasses/bronzes being caked in the stuff, then I'd never get any bargains! But the downside is I do really hate cleaning it out, especially when its been there since the hayday of the stuff in the 70s!
You're right about the methods of cleaning and I'll take your advice mate

Can I ask you if you have any ideas for what other colours would be traditional for these?

Kind Regards
Gene

Of course, if you do have to clean them a bit too much to get the brasso/silvo cement off, then I have to resort to non-vegan methods of re-oxidising the bronze That could affect my karma.
Yeah, this is probobly more correctly called brass, it is quite yellow

[kahnjar1]

I would be using a toothbrush to remove residue, or a firmer bristle brush if it was not loose. What about just washing it in water...should get rid of the powder.
As to colour...I have seen Red, Blue, Green, Gold on Indian sword scabbards---admittedly on the replica ones which seem to be about in large quantities, but of course old ones would normally have been a bit faded over the years unless they had been kept in the dark. You would need to get the "correct" shade of colour to make it look right though. I think if I were in your shoes I would use green, as close as possible to the stuff that is already there, or maybe just a little faded as the knife is not new. If you know someone who recovers pool tables you might be able to get some faded baise which could do the trick.
Stu.

[Battara]

I agree that this is probably Indian in origin. IT may have been gilded brass once.

[Atlantia]

Hi Battara,
I'm quite happy with Indian, thats the primary focus of my interest anyway.
Thanks for joining the discussion, I was beginning to think everyone had added me to their ignore list, or just hated the dagger
Do you have any other thoughts on it?

Regards
Gene