Katzbalgers and Related Landsknecht Swords

Matchlock · 6th April 2009, 03:39 PM

Obviously this mysterious guy is extremely brilliant, Fernando!

Michael

cornelistromp · 6th April 2009, 08:27 PM

Katzbalger dimensions.

1. the "swiss Katzbalger".(CF. Schneider-Stuber 1980 page 66-75)
In the Northern part of Switzerland was an isolated development of the Katzbalger with mostly open S-shaped guards and blade length's from
approx. 85CM - 118CM. different grips and pommel shapes were used.

2. the "German Katzbalger".
Horizontal S- to 8 shaped guillons of twisted Iron often chiseled and ending in knob-terminals.the grip almost always terminates in a cap fitting down over it. Alternatively the spreading end of the grip is made of metal and no true pommel exists. (CF Norman the rapier and the small sword hilt 3)
the 2 edged blades measure 50cm-80cm with a width of 3.5cm - 4.5cm.
(CF Seifert 1968 p461)
the Ricasso, if there is one, has the same width as the cutting part of the blade and has short fullers parallel to the edge of the blade. the same type of blade can also be found on other 15thC and 16thC swords. ( CF Seitz 1965
Taf. IX; Schneider-Stuber 1980, 71, kat NR 98 (1500-1530) Kat Nr. 103 (from Zeughaus Zürich, 1520-1550, 128 Kat. Nr. 180 (Bodenseeraum 1520-1550).

RE: Blade thickness
there is no general rule for it, I have Katzbalgers with very thin flexible blades and Katzbalgers with stiffer thicker blades in my collection.
I think it depends on the fighting style of the period/area and of course of it's owner.

Best regards

Cornelis tromp

Gonzalo G · 10th April 2009, 07:43 AM

!Thank you very much, Michael and Cornelis!
My best regards

Gonzalo

6th April 2009, 03:39 PM	#1
Matchlock (deceased) Join Date: Sep 2008 Location: Bavaria, Germany - the center of 15th and 16th century gunmaking Posts: 4,310	Obviously this mysterious guy is extremely brilliant, Fernando! Michael

6th April 2009, 08:27 PM	#2
cornelistromp Member Join Date: Mar 2009 Posts: 1,060	Katzbalger dimensions. 1. the "swiss Katzbalger".(CF. Schneider-Stuber 1980 page 66-75) In the Northern part of Switzerland was an isolated development of the Katzbalger with mostly open S-shaped guards and blade length's from approx. 85CM - 118CM. different grips and pommel shapes were used. 2. the "German Katzbalger". Horizontal S- to 8 shaped guillons of twisted Iron often chiseled and ending in knob-terminals.the grip almost always terminates in a cap fitting down over it. Alternatively the spreading end of the grip is made of metal and no true pommel exists. (CF Norman the rapier and the small sword hilt 3) the 2 edged blades measure 50cm-80cm with a width of 3.5cm - 4.5cm. (CF Seifert 1968 p461) the Ricasso, if there is one, has the same width as the cutting part of the blade and has short fullers parallel to the edge of the blade. the same type of blade can also be found on other 15thC and 16thC swords. ( CF Seitz 1965 Taf. IX; Schneider-Stuber 1980, 71, kat NR 98 (1500-1530) Kat Nr. 103 (from Zeughaus Zürich, 1520-1550, 128 Kat. Nr. 180 (Bodenseeraum 1520-1550). RE: Blade thickness there is no general rule for it, I have Katzbalgers with very thin flexible blades and Katzbalgers with stiffer thicker blades in my collection. I think it depends on the fighting style of the period/area and of course of it's owner. Best regards Cornelis tromp

10th April 2009, 07:43 AM	#3
Gonzalo G Member Join Date: Apr 2007 Location: Nothern Mexico Posts: 458	!Thank you very much, Michael and Cornelis! My best regards Gonzalo