What Would You Do ?

LPCA · 3rd March 2009, 02:07 PM

Hi, Ariel.

it's just a polyester putty (mastic) of professional quality for yatchs or cars. They need a hardener which is provided with.
Easy to find in little boxes.
Very easy to use - It dries rapidly and can be sand without problem with dry or wet paper.
We can slightly color it with the acrylic painting for board during the mixture.
Or then after drying, then brush with a wax the whole hilt.

Hope that can help you.
Louis-Pierre

Rick · 3rd March 2009, 03:58 PM

I.O.W. Bondo .

LPCA · 3rd March 2009, 04:06 PM

Sorry, Rick, my english level does not allow me to understand what is IOW Bondo.
Can you traduce in english pls?.
Thanks

Queequeg · 3rd March 2009, 04:24 PM

"IOW" is short for "in other words".

Bondo is an epoxy putty which repairmen use to fix holes or small dents in the body of an automobile.
http://en.wikipedia.org/wiki/Bondo_(putty)

LPCA · 3rd March 2009, 04:37 PM

Thank you , QueeQueg.

Yes, it's the same product.

Robert · 3rd March 2009, 05:19 PM

LPCA, Very nice restoration work you've done on your swords!! I tried using bondo at one time but it did not want to stick very well for me. It could have been that at that time I was still able to swing them around and the bondo was separating from the horn. That is the main reason that I started using epoxy putty. It colors well before or after being applied but because of the fast drying time I prefer to do the coloring after it has dried and been completely finished sanded. The reason this swords repairs are still like they are is I ran out of the brown permanent markers that I use in conjunction with a black marker to color the putty in with. I am going into town today to pick up more, so I should be able to post pictures tonight of the finished work. If it was not for the fact that I would have had to grind off the end of the tang

I would have just used the original grip as a pattern and made a new grip of water buffalo horn to replace the damaged one. Does anyone else have pictures of any restoration work that they have done to damaged grips or hilts that they would like to share with the rest of us? My thanks to everyone for your interest and suggestions on how to repair the damage often found on these older neglected and often mistreated items.

Robert

LPCA · 3rd March 2009, 06:31 PM

Robert, here is some pics of the Yathagan's restoration.

The main problem was the recovery of the hilt and the building of the 2 hears in a hard and dark wood.

I did 3 pairs of hears and choose among them the less more horrible.
I added 2 pieces of ivory.
IThen i used gold leaves for the metallic parts.

Louis-Pierre

3rd March 2009, 02:07 PM	#1
LPCA Member Join Date: Oct 2008 Location: Toulouse - FRANCE Posts: 83	Hi, Ariel. it's just a polyester putty (mastic) of professional quality for yatchs or cars. They need a hardener which is provided with. Easy to find in little boxes. Very easy to use - It dries rapidly and can be sand without problem with dry or wet paper. We can slightly color it with the acrylic painting for board during the mixture. Or then after drying, then brush with a wax the whole hilt. Hope that can help you. Louis-Pierre Attached Images

3rd March 2009, 06:31 PM	#7
LPCA Member Join Date: Oct 2008 Location: Toulouse - FRANCE Posts: 83	Robert, here is some pics of the Yathagan's restoration. The main problem was the recovery of the hilt and the building of the 2 hears in a hard and dark wood. I did 3 pairs of hears and choose among them the less more horrible. I added 2 pieces of ivory. IThen i used gold leaves for the metallic parts. Louis-Pierre Attached Images

3rd March 2009, 03:58 PM	#2
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,339	I.O.W. Bondo .

3rd March 2009, 04:06 PM	#3
LPCA Member Join Date: Oct 2008 Location: Toulouse - FRANCE Posts: 83	Sorry, Rick, my english level does not allow me to understand what is IOW Bondo. Can you traduce in english pls?. Thanks

3rd March 2009, 04:24 PM	#4
Queequeg Member Join Date: Jun 2007 Location: Detroit (New Mayapan) Posts: 96	"IOW" is short for "in other words". Bondo is an epoxy putty which repairmen use to fix holes or small dents in the body of an automobile. http://en.wikipedia.org/wiki/Bondo_(putty)

3rd March 2009, 04:37 PM	#5
LPCA Member Join Date: Oct 2008 Location: Toulouse - FRANCE Posts: 83	Thank you , QueeQueg. Yes, it's the same product.

3rd March 2009, 05:19 PM	#6
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	LPCA, Very nice restoration work you've done on your swords!! I tried using bondo at one time but it did not want to stick very well for me. It could have been that at that time I was still able to swing them around and the bondo was separating from the horn. That is the main reason that I started using epoxy putty. It colors well before or after being applied but because of the fast drying time I prefer to do the coloring after it has dried and been completely finished sanded. The reason this swords repairs are still like they are is I ran out of the brown permanent markers that I use in conjunction with a black marker to color the putty in with. I am going into town today to pick up more, so I should be able to post pictures tonight of the finished work. If it was not for the fact that I would have had to grind off the end of the tang I would have just used the original grip as a pattern and made a new grip of water buffalo horn to replace the damaged one. Does anyone else have pictures of any restoration work that they have done to damaged grips or hilts that they would like to share with the rest of us? My thanks to everyone for your interest and suggestions on how to repair the damage often found on these older neglected and often mistreated items. Robert