Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > European Armoury
FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
Old 8th October 2008, 10:20 PM   #1
fearn
Member
 
Join Date: Dec 2004
Posts: 1,247
Default

Dear Fernando and Jim,

You're quite welcome on the quote, and I'm glad to finally see one of those Allen guns.

Jim--I'm not an expert on blackpowder weapons, but logically, I would guess that the source of the multiple ignition problem lies in the back of the revolving barrel. In modern revolvers, the cartridge seals the back of the barrel, so that the explosion is contained in the chamber. In a black powder revolver, if there's any leakage from one chamber to the next (or from one primer hole to the next) you could get the explosion in one chamber setting off the others.

Just a guess.

F
fearn is offline   Reply With Quote
Old 8th October 2008, 11:57 PM   #2
fernando
(deceased)
 
fernando's Avatar
 
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
Default

Hi Gentlemen,
I'm no expert either, but i see it close to Fearn's impression.
I would further point out that, in my view:
The black powder cylinders or, better saying, the percussion (cap and ball) cylinders, are not opened in their back; you pour your gunpowder into them like you pour it in a vase, later locking it with the bullet. The only passage to the exterior is inded the ignition cap nipple.
It happens that, when you strike the cap with the pistol's hammer to ignite the powder charge inside the chamber, plenty flames come out the nipple, as the cap is not completely tight. Therefore and potentialy these escaping flames end out igniting the nipple next door, due to their close vicinity. You would then, in a hazardous context, ignite all chambers ... either in a chain succession, which is more likely and, in such case, only shooting the whole thing without bursting in your face, or in an absolute simultaneous deflagration, in such case blowing yourself up, instead of shooting frontwards.
I guess the efect quoted in the first place is like when you want to extract rock from a stone pit. As you don't want your rocks to pulverize with the explosion, you use detonators with a (micro) time delay among them, so that the apparent simultanity achieved is 'false', with your rocks bracking apart but not becoming gravel; how's this for a comparison ?
If indeed things happened as sugested, the coming of the complete sealed cartridge has put an end to these misfire situations; in this case ignition occurs inside the ammunition ... no flames hanging around.
Pardon me for all i said, in case it's all 'bs'.
Fernando

Last edited by fernando; 9th October 2008 at 12:34 AM.
fernando is offline   Reply With Quote
Old 9th October 2008, 05:15 AM   #3
Jim McDougall
Arms Historian
 
Jim McDougall's Avatar
 
Join Date: Dec 2004
Location: Route 66
Posts: 10,601
Default

Fearn and Fernando,
Thanks so much guys for the explanations, which really make sense. It does sound pretty frightening to think of all these barrels going off...just one at a time is bad enough when dealing with black powder.
Sounds pretty difficult to work with, and I once had the chance to fire an old flintlock musket, out in the backwoods in Arkansas, where guys still hunt with these and bow and arrow. The ignition, sparks and detonation were pretty amazing and talk about smoke! One could see how in battles like Waterloo, where thousands of these were discharged in unison, nobody could see anything in just minutes (a great book describing this "Face of Battle", John Keegan).

BTW, me, the total novice, with that long gun...hit my target!!!

Thanks again, All the best,
Jim
Jim McDougall is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.