Replacement bun tut

David · 15th November 2007, 07:10 PM

looks Bugis to me, but some close-ups would help.

BluErf · 16th November 2007, 06:05 PM

Taking a long hard look, I think this keris is a keris debek from N Malaysia/S Thailand.

The sampir is rather compact, but is definitely more akin to the other keris debek sampir I've seen. The other possibility is Banjarmasin, but that form does not have overhanging daun like this. As for a Minang origin, the roundedness of the underside is something I've not really seen in Minang kerises. Another point is that if this is Minang, the batang should be tapering, but this specimen here does not.

Blade-wise, first impression was that this was a coteng-type blade. Meaning it comes from the Singora area in S. Thailand. Such blades can look very very Bugis, but the styling of the base of the keris is the part that differentiates it from Bugis blades from the South.

You could consider a buntut like the type on the example below (not my keris).

Alam Shah · 16th November 2007, 09:35 PM

For the buntut, I would suggest the type BluErf suggested. Another example is something like the one below (see example). Looking at your existing sheath's buntut, it would be easier to reshape to BluErf's example. Most probably the earlier buntut look like that.

archer · 16th November 2007, 11:41 PM

Thank you all, for your interesting input and advice. I'll send a "better closeup"
of the blade base. Here in Alaska were not seeing a lot of photographic sun light so it's a flash or nothing. I found a related keris called a debduk image enclosed.
I'll start the finish shaping with as much taper as remaining material permits.
Thank you, Steve

archer · 22nd November 2007, 01:26 AM

With the material onhand this is as much as I could shape the bun tut. When more ivory comes my way I'll try again.

Thank you All for your help and comments.

Steve

Alam Shah · 22nd November 2007, 04:11 AM

Actually, with your existing material is more than enough to create the shape of a semi-circle. Re-look at the shape again... make it rounder.

Something like this buntut shape...

archer · 22nd November 2007, 04:58 AM

Hi Alam, I would love to round it out but The stem goes too close to the bottom as it is and further rounding would cause it to break through. So I'll have to try again with a bigger piece later.

16th November 2007, 06:05 PM	#2
BluErf Member Join Date: Dec 2004 Location: Singapore Posts: 1,180	Taking a long hard look, I think this keris is a keris debek from N Malaysia/S Thailand. The sampir is rather compact, but is definitely more akin to the other keris debek sampir I've seen. The other possibility is Banjarmasin, but that form does not have overhanging daun like this. As for a Minang origin, the roundedness of the underside is something I've not really seen in Minang kerises. Another point is that if this is Minang, the batang should be tapering, but this specimen here does not. Blade-wise, first impression was that this was a coteng-type blade. Meaning it comes from the Singora area in S. Thailand. Such blades can look very very Bugis, but the styling of the base of the keris is the part that differentiates it from Bugis blades from the South. You could consider a buntut like the type on the example below (not my keris). Attached Images

16th November 2007, 09:35 PM	#3
Alam Shah Member Join Date: Jan 2005 Location: Singapore Posts: 1,248	For the buntut, I would suggest the type BluErf suggested. Another example is something like the one below (see example). Looking at your existing sheath's buntut, it would be easier to reshape to BluErf's example. Most probably the earlier buntut look like that. Attached Images Last edited by Alam Shah; 17th November 2007 at 12:53 AM.

16th November 2007, 11:41 PM	#4
archer Member Join Date: Mar 2005 Posts: 373	Re Replacement Thank you all, for your interesting input and advice. I'll send a "better closeup" of the blade base. Here in Alaska were not seeing a lot of photographic sun light so it's a flash or nothing. I found a related keris called a debduk image enclosed. I'll start the finish shaping with as much taper as remaining material permits. Thank you, Steve Attached Images

22nd November 2007, 01:26 AM	#5
archer Member Join Date: Mar 2005 Posts: 373	Re Replacement With the material onhand this is as much as I could shape the bun tut. When more ivory comes my way I'll try again. Thank you All for your help and comments. Steve Attached Images

22nd November 2007, 04:58 AM	#7
archer Member Join Date: Mar 2005 Posts: 373	Re Replacement Hi Alam, I would love to round it out but The stem goes too close to the bottom as it is and further rounding would cause it to break through. So I'll have to try again with a bigger piece later.

15th November 2007, 07:10 PM	#1
David Keris forum moderator Join Date: Aug 2006 Location: Nova Scotia Posts: 7,238	looks Bugis to me, but some close-ups would help.

22nd November 2007, 04:11 AM	#6
Alam Shah Member Join Date: Jan 2005 Location: Singapore Posts: 1,248	Actually, with your existing material is more than enough to create the shape of a semi-circle. Re-look at the shape again... make it rounder. Something like this buntut shape...