A Berber saber?

Joe · 10th February 2007, 09:42 PM

Hmmm, does anybody know where checkerboard patterns were used as decorations on sword handles? That may provide a clue.

Btw, these two are owned by Adam Rose. One has a regular tip, and the other has a very slight concave tip.

Rick · 11th February 2007, 01:06 AM

I'm not saying that this is a Berber sabre.
I only point out that this is most likely a military blade remounted a la my example of a Berber sabre .
I also mention a passing resemblance to the Nimcha style hilt.
That does not mean that it is a relation; only food for thought .

Finally, I would like to see examples of this style of checkerboard and nail inlaid decoration in a Indo/Malay sword hilt if anyone has seen one; for I have not.

FenrisWolf · 11th February 2007, 08:09 AM

No luck on the hilt yet, but I did stumble across this version of a nimcha on the Therion Arms page. The blade is listed as 'napoleonic', and at 24 1/2" is identical in length to the one I just bought. Due to the poor angle in the pictures posted by the seller it's impossible to be sure, but it looks awfully close to me. Not also the slight humpback profile to the hilt, peraps due to the profile of the tang? Anyway, more food for thought.

PS -- I hope I didn't violate any rules by posting these pics. I did give credit for their source, and the item in question was already sold.

Tim Simmons · 11th February 2007, 09:16 AM

This hilt is from A. G.Van Zonnevelds, Traditional weapons of The Indonesian Archipelago. Okay it is not the same shape but does show the same decorative materials and technique. One could also argue that the shape is as similar as the Nimcha. In the aforementioned book swords from Timor like the hilt shown often had European blades. Also in this book pictures of other swords from Timor are all constructed in this more simple manner. I am sure I have some better pictures which I will add when I find then. I also want to add some pictures to the rust removal thread but can a find them

Maybe if I stop look so hard i will find what I want right in front of my eyes.

Flavio · 11th February 2007, 10:43 AM

Hi all! me too i was looking at this beauty (congratulations Fenris!!

) and i was thinking that is a north african sword. Maybe i'm wrong but the decoration on the handle remember me some decorations on maroccan or north african matchlock guns.

My twoo cents...

Jim McDougall · 11th February 2007, 04:19 PM

I am in accord with Rick on this one, I also believe this to be most likely from Spanish regions in Morocco, and as he notes the blade is military. The blade appears to be a British M1796 light cavalry example as occur in use on the 'Berber' sabres also being shown in the posts here. Although these interesting sabres have generally been accepted as Berber and probably from Moroccan regions, there is some disagreement to that attribution. These typically occur with the M1796 blades, which are typically highly profiled at the tip, although other sabre blades have been seen and not all carry the dramatic profiling. I remain inclined to believe they are indeed from Spanish Morocco.

I think this interesting variant posted by Fenris reflects traditional Mudejar influence in the studded checkerboard motif, though as noted, this motif does seem atypical on weapons of these regions. It seems of course that I have seen something similar, but as yet have not located it. In "Southwestern Colonial Ironwork" (Simmons & Turley, N.M.1980, p.5), the authors note ornamental nail heads or bosses (=chatones) liberally applied to doors and chest, and that the "...Moorish distaste for empty space", "...led them to fill large door panels with symmetrical placings of decorative nail heads". Although this characteristic describes quite early application of this motif in medieval Andulusia, the style of course carried into the Spanish regions in Morocco and is reflected in degree in the material culture there.

The wire wrap on the grip of course reflects that practice on the sword hilts of Arabia and India, deriving from the same often applied on Persian shamshirs. The knives of Bou Saada adopted that characteristic in the same manner as appears on this sabre ( the term nimcha of course colloquially presumed), through trade influences as that was in important stop in Algeria on caravan routes.

The curved profile of the blade root to meet the ferrule of the grip is much the same as on the 'Berber' sabres.

The inclination that often brings the recollection of SEA probability in many of these weapons from North Africa I think derives from the fact that many of the influences on those weapons also derive from Arab trade, that of course carried in degree many Moorish features. That is of course even more prevalent in Philippine regions which were colonized by Spain, and those influences certainly diffused in the environs through trade, warfare and varied interaction.

I hope somebody can find an example of the 'checkerboard' mofif elsewhere, its drivin' me nuts trying to find the example I saw!!

All the best,
Jim

Tim Simmons · 11th February 2007, 06:17 PM

So far it is 4-1 that are still a different shape and do not display decoration, construction and forte arrangement similar to the starting piece. To me we need pictures of other examples to be sure of any opinion.

10th February 2007, 09:42 PM	#1
Joe Member Join Date: Sep 2006 Location: McDonough, GA Posts: 48	Hmmm, does anybody know where checkerboard patterns were used as decorations on sword handles? That may provide a clue. Btw, these two are owned by Adam Rose. One has a regular tip, and the other has a very slight concave tip. Attached Images

11th February 2007, 09:16 AM	#4
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,843	This hilt is from A. G.Van Zonnevelds, Traditional weapons of The Indonesian Archipelago. Okay it is not the same shape but does show the same decorative materials and technique. One could also argue that the shape is as similar as the Nimcha. In the aforementioned book swords from Timor like the hilt shown often had European blades. Also in this book pictures of other swords from Timor are all constructed in this more simple manner. I am sure I have some better pictures which I will add when I find then. I also want to add some pictures to the rust removal thread but can a find them Maybe if I stop look so hard i will find what I want right in front of my eyes. Attached Images

11th February 2007, 01:06 AM	#2
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,336	I'm not saying that this is a Berber sabre. I only point out that this is most likely a military blade remounted a la my example of a Berber sabre . I also mention a passing resemblance to the Nimcha style hilt. That does not mean that it is a relation; only food for thought . Finally, I would like to see examples of this style of checkerboard and nail inlaid decoration in a Indo/Malay sword hilt if anyone has seen one; for I have not.

11th February 2007, 08:09 AM	#3
FenrisWolf Member Join Date: Jan 2007 Posts: 181	No luck on the hilt yet, but I did stumble across this version of a nimcha on the Therion Arms page. The blade is listed as 'napoleonic', and at 24 1/2" is identical in length to the one I just bought. Due to the poor angle in the pictures posted by the seller it's impossible to be sure, but it looks awfully close to me. Not also the slight humpback profile to the hilt, peraps due to the profile of the tang? Anyway, more food for thought. PS -- I hope I didn't violate any rules by posting these pics. I did give credit for their source, and the item in question was already sold.

11th February 2007, 10:43 AM	#5
Flavio Member Join Date: Dec 2004 Location: Italia Posts: 1,243	Hi all! me too i was looking at this beauty (congratulations Fenris!! ) and i was thinking that is a north african sword. Maybe i'm wrong but the decoration on the handle remember me some decorations on maroccan or north african matchlock guns. My twoo cents...

11th February 2007, 04:19 PM	#6
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 10,192	I am in accord with Rick on this one, I also believe this to be most likely from Spanish regions in Morocco, and as he notes the blade is military. The blade appears to be a British M1796 light cavalry example as occur in use on the 'Berber' sabres also being shown in the posts here. Although these interesting sabres have generally been accepted as Berber and probably from Moroccan regions, there is some disagreement to that attribution. These typically occur with the M1796 blades, which are typically highly profiled at the tip, although other sabre blades have been seen and not all carry the dramatic profiling. I remain inclined to believe they are indeed from Spanish Morocco. I think this interesting variant posted by Fenris reflects traditional Mudejar influence in the studded checkerboard motif, though as noted, this motif does seem atypical on weapons of these regions. It seems of course that I have seen something similar, but as yet have not located it. In "Southwestern Colonial Ironwork" (Simmons & Turley, N.M.1980, p.5), the authors note ornamental nail heads or bosses (=chatones) liberally applied to doors and chest, and that the "...Moorish distaste for empty space", "...led them to fill large door panels with symmetrical placings of decorative nail heads". Although this characteristic describes quite early application of this motif in medieval Andulusia, the style of course carried into the Spanish regions in Morocco and is reflected in degree in the material culture there. The wire wrap on the grip of course reflects that practice on the sword hilts of Arabia and India, deriving from the same often applied on Persian shamshirs. The knives of Bou Saada adopted that characteristic in the same manner as appears on this sabre ( the term nimcha of course colloquially presumed), through trade influences as that was in important stop in Algeria on caravan routes. The curved profile of the blade root to meet the ferrule of the grip is much the same as on the 'Berber' sabres. The inclination that often brings the recollection of SEA probability in many of these weapons from North Africa I think derives from the fact that many of the influences on those weapons also derive from Arab trade, that of course carried in degree many Moorish features. That is of course even more prevalent in Philippine regions which were colonized by Spain, and those influences certainly diffused in the environs through trade, warfare and varied interaction. I hope somebody can find an example of the 'checkerboard' mofif elsewhere, its drivin' me nuts trying to find the example I saw!! All the best, Jim

11th February 2007, 06:17 PM	#7
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,843	So far it is 4-1 that are still a different shape and do not display decoration, construction and forte arrangement similar to the starting piece. To me we need pictures of other examples to be sure of any opinion.