Bendo

[kronckew]

hi. i have one of the dutch klewangs i bought at an arms show here in the UK, scabbard is oiled dark brown leather with a brass tip, steel reenforcement at the throat, blade is dark steel, very sharp, light pitting in some places, guard steel, black rust patina, grips wood scales, 3 brass cutlers rivets, large pommel screw at end. blade is marked PD over a LUNESCHLOSS over SOLINGEN just ahead of the guard and the opposite side has a very small figure i can not make out. blade is 4mm x 35 mm. at the guard with a distal taper down to about 2.5mm just before the false edge starts

[Henk]

Originally Posted by kronckew

hi. i have one of the dutch klewangs i bought at an arms show here in the UK, scabbard is oiled dark brown leather with a brass tip, steel reenforcement at the throat, blade is dark steel, very sharp, light pitting in some places, guard steel, black rust patina, grips wood scales, 3 brass cutlers rivets, large pommel screw at end. blade is marked PD over a LUNESCHLOSS over SOLINGEN just ahead of the guard and the opposite side has a very small figure i can not make out. blade is 4mm x 35 mm. at the guard with a distal taper down to about 2.5mm just before the false edge starts

This is a German sabre. Solingen is German and not Dutch.
The sabre looks like a klewang used by the dutch army, but this guard divers from the klewang guard. As far as I know, the Dutch didn't used german weapons. So I doubt if you can call this a dutch klewang. But I do like it.

[kronckew]

Originally Posted by Henk

This is a German sabre. Solingen is German and not Dutch.
The sabre looks like a klewang used by the dutch army, but this guard divers from the klewang guard. As far as I know, the Dutch didn't used german weapons. So I doubt if you can call this a dutch klewang. But I do like it.

interesting, i cannot see much difference between mine and the other one illustrated other than the blade marking. if you could point out the differences i would be appreciative. the scabbard, fittings, belt loop, scabbard throat and chape all look the same - even to the staples holding the brass chape to the scabbard and the two parallel lines down the leather part of the scabbard, also the blade shape and the fuller on the blade. blade length 24.5 in. (625mm) grip length ~ 4.75 in. (125mm) x 1.25 in. (30mm) wide x 1 in.(25.4mm) thick...

i am of course aware that solingen is in germany, they made blades for a number of other countries as well.

more pics