Indian? sword for ID

Jim McDougall · 17th December 2006, 12:08 AM

Hi Bill,
Thanks very much!
Also thank you for the support in furthering our study on Indian weapons, these are so incredibly under researched in most cases. The greatest advance we have had on these has been Robert Elgood's outstanding and seminal work on "Hindu Arms and Ritual". I hope future reference books discussing ethnographic weapons will follow his lead with the excellent perspective he uses so skillfully in the examination and identification of them.

Interesting Tibetan items, and great story on the 'worn out' items!! Uh, I'd be happy to take a whole bunch of new shiny stuff over there to trade for all these old worn out things!!!!

Thanks again, and a very Merry Christmas to you as well,
Jim

Joe · 17th December 2006, 06:19 AM

The same question popped up on SFI last July.

http://forums.swordforum.com/showthr...ight=acalantha

I figured it was some type of acalantha remounted as a temple piece.

ariel · 17th December 2006, 01:55 PM

Not only the same type of sword, it is the same sword!
Look at the forging flaw at the top of the blade.

Jens Nordlunde · 17th December 2006, 04:22 PM

Hi Joe, and welcome to the forum

.

Thank you for the link, of which I was not aware. The sword is indeed either Nepalese or Tibetan, personally I would vote for Nepalese. The blade could have been rehilted, although I doubt it, as all the blades I have seen of this type were riveted to a reinforcement from the hilt, and this one does not have any holes after having been riveted. This type of blade has been used since ancient times in Nepal, which you can see when studying old Nepalese bronze deities.

Jim McDougall · 21st December 2006, 02:05 AM

Excellent observations Jens! I am inclined to opt for the Nepalese possibility as well, over the Tibetan. Tibetan swords typically exhibit the distinctive hairpin pattern welded blades which also preserve the ancient Sui and Tang profiles which later were carried into the familiar Japanese blades. These are also characteristic on Bhutanese swords.
In Nepal, however, there was considerable diffusion of weaponry from India and other regions to the south. It would seem that numerous weapons found in these regions reflect atavistic influence from iconographic sources that may include forms from ancient Greek weapons.

While the interesting pommel does reflect the Tibetan 'dorje' element, as I noted there are certain features in the structure of the hilt that recall distinct Indian influence. Most notable perhaps, would be the unusual 'skirted' form of the lower hilt, which appears in variation on numerous Mughal jade dagger hilts, and mostly of latter 17th thru the 18th c. These are of course mostly from N.India (though Mysore examples are noted) and are shown in a number of examples in Pant (p.205; #607, #609, #611).

It seems entirely plausible that in Nepal, a ceremonial sword might carry influences from both Tibet, to the north, with Tantric elements as well as the aesthetics of Mughal weapons to the south. We know that the kukri was well established in India, though thought of as indiginous to Nepal, and that there are tulwar hilted koras as well as kukris.

I found some interesting notes concerning swords in Bhutan, which may have some bearing on the use of ceremonial swords in Nepal in some degree as well via the influences that seem to diffuse in these regions.
In "Bhutan,Land of the Thunder Dragon" by Burt Kerr Todd (National Geographic, Vol.CII, #6, Dec.1952), the author notes that "...the 'pathang' or ceremonial sword is reserved for wear in or around the dzongs (forts) that dot the countryside. Without the sword, and the appropriate shawl to show his rank, he is not permitted within these centers of Bhutanese central life".

I think these factors may support a Nepalese origin for this sword, as Jens has suggested, as well as his notes on the early iconography in Nepal that depicts this ancient blade form, which is interestingly very similar to the Greek 'phasganon' (Burton, fig.254).

Best regards,
Jim

Jens Nordlunde · 21st December 2006, 05:15 PM

Hi Jim,
Yes I think we got it, it must be Nepalese. Interesting that this blade type was used over a very large area.

Hi Katana,
You wrote about the balance, but these blades were not very thick, so the balance can have been all right, besides, if it was a ceremonial sword, I don’t think it would have mattered a lot.

Joe · 22nd December 2006, 06:24 AM

I'm inclined to believe you guys on your Nepalese conclusion.

Does anyone have any pics showing a sword of this type with a more Nepalese mounting style?

Also, working one the conclusion that the blade is Indian, could it be classified as a Pattisa blade?

17th December 2006, 04:22 PM	#4
Jens Nordlunde Member Join Date: Dec 2004 Location: Europe Posts: 2,718	Hi Joe, and welcome to the forum. Thank you for the link, of which I was not aware. The sword is indeed either Nepalese or Tibetan, personally I would vote for Nepalese. The blade could have been rehilted, although I doubt it, as all the blades I have seen of this type were riveted to a reinforcement from the hilt, and this one does not have any holes after having been riveted. This type of blade has been used since ancient times in Nepal, which you can see when studying old Nepalese bronze deities.

17th December 2006, 12:08 AM	#1
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 10,281	Hi Bill, Thanks very much! Also thank you for the support in furthering our study on Indian weapons, these are so incredibly under researched in most cases. The greatest advance we have had on these has been Robert Elgood's outstanding and seminal work on "Hindu Arms and Ritual". I hope future reference books discussing ethnographic weapons will follow his lead with the excellent perspective he uses so skillfully in the examination and identification of them. Interesting Tibetan items, and great story on the 'worn out' items!! Uh, I'd be happy to take a whole bunch of new shiny stuff over there to trade for all these old worn out things!!!! Thanks again, and a very Merry Christmas to you as well, Jim

17th December 2006, 06:19 AM	#2
Joe Member Join Date: Sep 2006 Location: McDonough, GA Posts: 48	The same question popped up on SFI last July. http://forums.swordforum.com/showthr...ight=acalantha I figured it was some type of acalantha remounted as a temple piece.

17th December 2006, 01:55 PM	#3
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	Not only the same type of sword, it is the same sword! Look at the forging flaw at the top of the blade.

21st December 2006, 02:05 AM	#5
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 10,281	Excellent observations Jens! I am inclined to opt for the Nepalese possibility as well, over the Tibetan. Tibetan swords typically exhibit the distinctive hairpin pattern welded blades which also preserve the ancient Sui and Tang profiles which later were carried into the familiar Japanese blades. These are also characteristic on Bhutanese swords. In Nepal, however, there was considerable diffusion of weaponry from India and other regions to the south. It would seem that numerous weapons found in these regions reflect atavistic influence from iconographic sources that may include forms from ancient Greek weapons. While the interesting pommel does reflect the Tibetan 'dorje' element, as I noted there are certain features in the structure of the hilt that recall distinct Indian influence. Most notable perhaps, would be the unusual 'skirted' form of the lower hilt, which appears in variation on numerous Mughal jade dagger hilts, and mostly of latter 17th thru the 18th c. These are of course mostly from N.India (though Mysore examples are noted) and are shown in a number of examples in Pant (p.205; #607, #609, #611). It seems entirely plausible that in Nepal, a ceremonial sword might carry influences from both Tibet, to the north, with Tantric elements as well as the aesthetics of Mughal weapons to the south. We know that the kukri was well established in India, though thought of as indiginous to Nepal, and that there are tulwar hilted koras as well as kukris. I found some interesting notes concerning swords in Bhutan, which may have some bearing on the use of ceremonial swords in Nepal in some degree as well via the influences that seem to diffuse in these regions. In "Bhutan,Land of the Thunder Dragon" by Burt Kerr Todd (National Geographic, Vol.CII, #6, Dec.1952), the author notes that "...the 'pathang' or ceremonial sword is reserved for wear in or around the dzongs (forts) that dot the countryside. Without the sword, and the appropriate shawl to show his rank, he is not permitted within these centers of Bhutanese central life". I think these factors may support a Nepalese origin for this sword, as Jens has suggested, as well as his notes on the early iconography in Nepal that depicts this ancient blade form, which is interestingly very similar to the Greek 'phasganon' (Burton, fig.254). Best regards, Jim

21st December 2006, 05:15 PM	#6
Jens Nordlunde Member Join Date: Dec 2004 Location: Europe Posts: 2,718	Hi Jim, Yes I think we got it, it must be Nepalese. Interesting that this blade type was used over a very large area. Hi Katana, You wrote about the balance, but these blades were not very thick, so the balance can have been all right, besides, if it was a ceremonial sword, I don’t think it would have mattered a lot.

22nd December 2006, 06:24 AM	#7
Joe Member Join Date: Sep 2006 Location: McDonough, GA Posts: 48	I'm inclined to believe you guys on your Nepalese conclusion. Does anyone have any pics showing a sword of this type with a more Nepalese mounting style? Also, working one the conclusion that the blade is Indian, could it be classified as a Pattisa blade?