Dha or Nimcha? Strange sword: need input

ariel · 9th October 2006, 02:23 AM

Sorry, I got poetic and forgot about the "academic" part
The handle is 5.5 inches long; the blade is 23" long and a tad more than 2" wide (close to the point). I do not have it's weight without scabbard, with scabbard and scabbard separately. This will surely disqualify it from ever being written up in an " academic" book

On a more serious note, it is superbly balanced and a pleasure to hold and to wield. Another thing: it is not sharpened for the first 5-7 inches, but after that .... you can shave with it!
It does have a resemblance to naval cutlasses but could just as well be used elsewhere. I thought about it being a variant of Nabur, but I have never seen one with a Nimcha handle, most of them had knuckleguards and the blade looks and feels Thai. Southern Thailand, with sizeable Muslim population? Were Thai blades exported to nearby countries?
Which brings us back to a discussion we once had: what determines the provemance or a general classificaton of a sword: the handle or the blade?
Say, we have a sword with a typical Nabur handle and a Yataghan blade. Where did it come from from the usage point of view? Shall we say it is a Borneo Parang Nabur with an Ottoman Yataghan blade or an Ottoman Yataghan with a SE Asian handle? Following Polish tradition, I would vote for the former.

Rick · 9th October 2006, 02:54 PM

I see a possibly Thai or Parang Nabur type blade with what I definitely would consider a N. African style handle .

I'd like to see some S.E.A. hilts that strongly resemble this one .

I apologise deeply for inferring that you were not being Academic Dr. ; myself; I'm just a lowly collector .

RhysMichael · 9th October 2006, 03:09 PM

I cannot tell the blade shape on this but in the scabbard the short one on here looks similar

ariel · 9th October 2006, 03:30 PM

Number 2?
It looks like a classic Moroccan Nimcha with 3 down-turned quillons and the fourth one forming a knuckleguard.
Some South Arabian swords had pommels resembling " Nimcha's" ( likely, an influence from Zanzibar), but I am unaware of this pattern penetrating deeper to the East.
There were large Arab colonies in S. India and Arab traders went as far as Indonesia ( Sindbad must have gone there on a weekly basis

)
We know about European and Indian influences on SEA swords. Are there any examples of Arab motives ? Inscriptions do not count: they are examples of religious Islamic influence rather than ethnographic Arabian influence.
I'll start: Indonesian Jambiya and Indian Haladie

Andrew · 9th October 2006, 03:47 PM

My casual observation is the blade profile does resemble that of Burmese and Thai swords.

However, I think the tang and fullering differ. Dha/darb tangs are not so "beefy" or squared off, and the fullering looks odd as well.

PUFF · 9th October 2006, 04:34 PM

Quote:

Originally Posted by Andrew

My casual observation is the blade profile does resemble that of Burmese and Thai swords.

However, I think the tang and fullering differ. Dha/darb tangs are not so "beefy" or squared off, and the fullering looks odd as well.

So do I, the square tang and such fuller do not fit with most of Siamese Dahb.

RSWORD · 9th October 2006, 10:04 PM

An interesting sword! I agree with Rick in that I believe it possibly was a boarding cutlass and this goes with its length and blade profile well. I have seen the use of red paint from a number of cultures. I have seen remnants of red paint on Ayda katti and I have also seen remnants of red paint on "Zanzibar" swords. Buttin in his catalogue pictures several fairly early Nimcha hilted swords which have similar blade profiles as this sword. The downturned quillons is a bit unusual but over the years I have seen a few swords with this quillon configuration and all these swords had short blades broadening towards the tip and gave one the feeling of being Naval weapons. Given the hilt configuration, I lean towards Algeria but would defer to anyone who could speak about pirating off the coast of N Africa in the 19th century because my gut feeling on this sword is this is where it probably was used. Matter of fact, I want to say pirating was huge off the Barbary Coast in the 19th century with pirates hailing from Morocco, Algeria and Tunisia. I would venture to guess the red paint might have been a good preservative against the salty sea water.

9th October 2006, 02:23 AM	#1
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	Sorry, I got poetic and forgot about the "academic" part The handle is 5.5 inches long; the blade is 23" long and a tad more than 2" wide (close to the point). I do not have it's weight without scabbard, with scabbard and scabbard separately. This will surely disqualify it from ever being written up in an " academic" book On a more serious note, it is superbly balanced and a pleasure to hold and to wield. Another thing: it is not sharpened for the first 5-7 inches, but after that .... you can shave with it! It does have a resemblance to naval cutlasses but could just as well be used elsewhere. I thought about it being a variant of Nabur, but I have never seen one with a Nimcha handle, most of them had knuckleguards and the blade looks and feels Thai. Southern Thailand, with sizeable Muslim population? Were Thai blades exported to nearby countries? Which brings us back to a discussion we once had: what determines the provemance or a general classificaton of a sword: the handle or the blade? Say, we have a sword with a typical Nabur handle and a Yataghan blade. Where did it come from from the usage point of view? Shall we say it is a Borneo Parang Nabur with an Ottoman Yataghan blade or an Ottoman Yataghan with a SE Asian handle? Following Polish tradition, I would vote for the former.

9th October 2006, 02:54 PM	#2
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,336	I see a possibly Thai or Parang Nabur type blade with what I definitely would consider a N. African style handle . I'd like to see some S.E.A. hilts that strongly resemble this one . I apologise deeply for inferring that you were not being Academic Dr. ; myself; I'm just a lowly collector .

9th October 2006, 03:09 PM	#3
RhysMichael Member Join Date: Dec 2004 Location: Virginia Posts: 520	I cannot tell the blade shape on this but in the scabbard the short one on here looks similar

9th October 2006, 03:30 PM	#4
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	Number 2? It looks like a classic Moroccan Nimcha with 3 down-turned quillons and the fourth one forming a knuckleguard. Some South Arabian swords had pommels resembling " Nimcha's" ( likely, an influence from Zanzibar), but I am unaware of this pattern penetrating deeper to the East. There were large Arab colonies in S. India and Arab traders went as far as Indonesia ( Sindbad must have gone there on a weekly basis ) We know about European and Indian influences on SEA swords. Are there any examples of Arab motives ? Inscriptions do not count: they are examples of religious Islamic influence rather than ethnographic Arabian influence. I'll start: Indonesian Jambiya and Indian Haladie

9th October 2006, 03:47 PM	#5
Andrew Member Join Date: Nov 2004 Location: USA Posts: 1,725	My casual observation is the blade profile does resemble that of Burmese and Thai swords. However, I think the tang and fullering differ. Dha/darb tangs are not so "beefy" or squared off, and the fullering looks odd as well.

9th October 2006, 10:04 PM	#7
RSWORD Member Join Date: Dec 2004 Location: Greensboro, NC Posts: 1,086	An interesting sword! I agree with Rick in that I believe it possibly was a boarding cutlass and this goes with its length and blade profile well. I have seen the use of red paint from a number of cultures. I have seen remnants of red paint on Ayda katti and I have also seen remnants of red paint on "Zanzibar" swords. Buttin in his catalogue pictures several fairly early Nimcha hilted swords which have similar blade profiles as this sword. The downturned quillons is a bit unusual but over the years I have seen a few swords with this quillon configuration and all these swords had short blades broadening towards the tip and gave one the feeling of being Naval weapons. Given the hilt configuration, I lean towards Algeria but would defer to anyone who could speak about pirating off the coast of N Africa in the 19th century because my gut feeling on this sword is this is where it probably was used. Matter of fact, I want to say pirating was huge off the Barbary Coast in the 19th century with pirates hailing from Morocco, Algeria and Tunisia. I would venture to guess the red paint might have been a good preservative against the salty sea water.