![]() |
![]() |
#1 |
Member
Join Date: Aug 2019
Location: Belgium
Posts: 293
|
![]()
My latest dha/daab, oal 83.5 cm, sword 81.5 cm, handle 26 cm and thickness of blade against handle 9 mm. It could be a sword from Laos. On Iain Norman's excellent homepage on Asian swords, in the article: the sword of the elephant, similar specimens but still some differences.
My dha has no handguard, the hilt is damaged but seemed to have been wrapped entirely with a thin white/gray metal rather than cast brass/bronze. The decoration of the handle against the guard is rather rudimentary, the knob at the end then resembles the specimens shown. The blade has had a hard life, with a bent piece in the center with two notches in the edge, must have been a violent impact. On the blade on both sides two light decorations. Sheath is in fair condition, the black rope seems recent (plastic?). Opinions welcome. Regards Marc |
![]() |
![]() |
![]() |
#2 |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,433
|
![]()
Hi Marc,
That one looks in pretty rough rough shape but it might clean up well. It needs a good clean to assess the hilt more clearly and the blade too. I think I see some areas of delamination of the blade—is that the case? I agree that it is a daab, probably Lao, 19th C. Iain will give you a more definitive answer. |
![]() |
![]() |
![]() |
#3 | |
Member
Join Date: Aug 2019
Location: Belgium
Posts: 293
|
![]() Quote:
Thanks for your response, the handle is indeed in a rough state. I have tried to polish the metal but with little result.The remaining metal is quite brittle, especially at the pommel.Where the metal is gone there is a hard material, looks like some kind of resin, a bit strange.The blade has some flaws in the steel probably due to impurities during melting, probably native steel. Regards. Marc |
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Sep 2005
Location: Singapore
Posts: 428
|
![]()
I hope a side question is ok while we wait for comments. Have we discussed these common markings? They are, of course, very present on tourist pieces from Thailand and I usually take it as a bad sign when I see them. However, you do see them on clearly authentic, and old pieces, as the case with this sword. I've also attached a Montagnard daab, featuring these marks, that was collecting in the Central Highlands Vietnam early in the American War there (only picture I had on hand but you can still note the markings despite low resolution.) How far back does this practice go, what geographic footprint would we expect to see them?
|
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 9,261
|
![]()
The sword in question was once a very nice sword, sadly it's left as a relic only. The stuff at the handle is indeed a mixture with resin and other components to form the thin silver cover which is mostly gone. It's a similar technique which was used by keris handles.
|
![]() |
![]() |
![]() |
#6 | |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 9,261
|
![]() Quote:
Yes, we had this discussion before. These markings are old and traditionell and not only seen on these tourist dha. Here is a Thai dha from my own collection, clearly old, I guess around the first quarter of the 20th century, with similar engravings on the blade. Regards, Detlef |
|
![]() |
![]() |
![]() |
#7 | |
Member
Join Date: Aug 2019
Location: Belgium
Posts: 293
|
![]() Quote:
From the seller's photos I could tell that the dha was old but the condition was indeed not great. But still interesting enough for me to buy, small price though. I don't come across this shape that often. Regards Marc |
|
![]() |
![]() |
![]() |
#8 | |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 9,261
|
![]() Quote:
I don't want to make your dha a bad buy. But it's a relic, good enough for study! ![]() Regards, Detlef |
|
![]() |
![]() |
![]() |
|
|