Old flintlock conversion to percussion

M ELEY · 16th February 2021, 03:33 PM

Thank you all for commenting on the piece. I had also noticed the 'feathered/eyed' hammer found on many percussion pieces of the period. I am leery on taking the gun apart to look at the lock from the inside. As the pics show, there are some instabilities/cracks in the wood. The piece is solid and intact, but once one starts unscrewing the mounts, I'd be afraid I could ruin the piece. I might just have to chalk this one up as a 'possible' conversion. As I am not an expert, I don't want to cause any more harm to it-

Fernando K · 16th February 2021, 07:23 PM

Hello

I differ. The locks of any old weapon have been put in place with two screws (and some with a hook and a single screw) and removing them is not dangerous. But you are the owner of this gun, and you have the right to do whatever you want, according to your beliefs. The same happens if you want to restore the wood, you will have to disassemble the lock, the barrel, and the trimmings.

Affectionately

rickystl · 17th February 2021, 02:40 PM

Nice old pistol.

Have to agree with Philip's comments. Guessing the conversion was done sometime during the 1840's.

Unfortunately for us collectors today, shortening the barrel and fore stock was quite common in the day.

Fernando K makes the good observation of the original lock decoration abruptly ending in the front portion of the lock plate - where the original frizzen spring would have been. The simple add on decoration added during the conversion.
Still, the conversion looks to have been well done.

To me, this pistol has a bit of Italian flair to it. (But maybe French)

Rick

Will M · 17th February 2021, 05:33 PM

Interesting pistol with great details. The hammer reminds me of Prussian arms.

16th February 2021, 03:33 PM	#1
M ELEY Member Join Date: Dec 2004 Location: NC, U.S.A. Posts: 2,196	Thank you all for commenting on the piece. I had also noticed the 'feathered/eyed' hammer found on many percussion pieces of the period. I am leery on taking the gun apart to look at the lock from the inside. As the pics show, there are some instabilities/cracks in the wood. The piece is solid and intact, but once one starts unscrewing the mounts, I'd be afraid I could ruin the piece. I might just have to chalk this one up as a 'possible' conversion. As I am not an expert, I don't want to cause any more harm to it-

16th February 2021, 07:23 PM	#2
Fernando K Member Join Date: Apr 2010 Posts: 672	Hello I differ. The locks of any old weapon have been put in place with two screws (and some with a hook and a single screw) and removing them is not dangerous. But you are the owner of this gun, and you have the right to do whatever you want, according to your beliefs. The same happens if you want to restore the wood, you will have to disassemble the lock, the barrel, and the trimmings. Affectionately

17th February 2021, 02:40 PM	#3
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,633	Nice old pistol. Have to agree with Philip's comments. Guessing the conversion was done sometime during the 1840's. Unfortunately for us collectors today, shortening the barrel and fore stock was quite common in the day. Fernando K makes the good observation of the original lock decoration abruptly ending in the front portion of the lock plate - where the original frizzen spring would have been. The simple add on decoration added during the conversion. Still, the conversion looks to have been well done. To me, this pistol has a bit of Italian flair to it. (But maybe French) Rick

17th February 2021, 05:33 PM	#4
Will M Member Join Date: Mar 2012 Location: In the wee woods north of Napanee Ontario Posts: 395	Interesting pistol with great details. The hammer reminds me of Prussian arms.