Identifying Modern Wootz

[mariusgmioc]

Originally Posted by ALEX

I actually did commission a wootz blade, and witnessed it being made (from scratch, not re-forging). I cannot disclose the process here, but I can attest to the fact.

Great!

It would be interesting to see the pattern you have on your new blade and see how does it compare to the antique wootz.
Is it from the Finnish blacksmith who claims to have reproduced the antique wootz pattern?!

You can see below one small knife Kirpichev offered me to buy (blade length 8 cm).

PS: If I remember correctly, Verhoeven describes a method of recovering wootz pattern after it was lost during re-heating.

[Silver John]

I recently saw this video: https://m.youtube.com/watch?v=iwsYool-JVI

The smith uses modern bearing steel (52100?) melted in a crucible with small amount of powdered graphite and glass. The knife produced from the ingot had a remarkably wootz like pattern.

[mariusgmioc]

Originally Posted by Silver John

I recently saw this video: https://m.youtube.com/watch?v=iwsYool-JVI

The smith uses modern bearing steel (52100?) melted in a crucible with small amount of powdered graphite and glass. The knife produced from the ingot had a remarkably wootz like pattern.

I would say it IS wootz. He used bearing steel as the base metal but re-melted it in a crucible, changed its carbon content, and ended up with wootz.

Yet, the pattern is very different from the antique watery pattern.