Requesting Help!! Identifying the specifics of a Kris

[jagabuwana]

Welcome maximummason!

With regards to David's suggestion about cleaning and staining, you may find these threads useful:
http://www.vikingsword.com/vb/showthread.php?t=23934
http://vikingsword.com/vb/showthread.php?t=25562

For more, I suggest you to use the search function to find out more about how to do that. but the two above should be more than enough to get started.

The cleaning should be simple and accessible to anyone, but a good staining job, depending on where you live and what you can access, will be difficult.
This is because traditionally in Indonesia "warangan" is used, which is a mineral containing high concentrations of arsenic. In lieu of that some on this forum use lab-grade arsenic trioxide which is inaccessible to most.

It is worth noting too that a thorough cleaning, which will invariably involve a light acid such as cooking vinegar, will remove whatever is left of the stain that is already on this keris.

You could always start with giving it a scrub with a toothbrush and dishwashing detergent then drying it thoroughly using a lint free cloth then a blowdryer.

[David]

Originally Posted by jagabuwana

The cleaning should be simple and accessible to anyone, but a good staining job, depending on where you live and what you can access, will be difficult.
This is because traditionally in Indonesia "warangan" is used, which is a mineral containing high concentrations of arsenic. In lieu of that some on this forum use lab-grade arsenic trioxide which is inaccessible to most.

The mineral that is used to make warangan is realgar i believe. It is not difficult to get, though many specimens appear to be relatively expensive and since i have never used it i could not really guide anyone on which ones are the best to use. I have heard the the redder/pinker varieties are best, but i cannot confirm. Lab-grade arsenic trioxide is far superior to use because its strength is always exactly the same and if applied properly it it will give the most consistent results. However, as you have already said, it is hard to obtain unless you have the right licenses. I have seen some good staining results with other, easier to obtain substances, but do not have any personal experience with them.