Philippine (?) spearhead for comments & ID

Lew · 23rd April 2006, 11:05 PM

Hi Ferg

Here are two from my collection.The smaller one may help you with your rehafting project.

Good Luck

Lew

Ferguson · 24th April 2006, 03:50 AM

Nice inlay Panday.

Lew and Rick thanks! Those pictures are just what I needed.

Steve

Rick · 24th April 2006, 04:03 AM

Ferg , you could easily make a ferrule like Lew's ; I would suggest using at least 6ga. Sterling sheet folded on the edge , formed around a ring mandrel and then soldered on a soldering mandrel while held together with iron wire .
Of course your silver sheet will have to be fan shaped in outline .
I'm willing to bet that Battara has the right equipment for this work .

I used to .

Silver is really fun to work with .

23rd April 2006, 11:05 PM	#1
Lew (deceased) Join Date: Dec 2004 Location: East Coast USA Posts: 3,191	Hi Ferg Here are two from my collection.The smaller one may help you with your rehafting project. Good Luck Lew Attached Images

24th April 2006, 03:50 AM	#2
Ferguson Member Join Date: Dec 2004 Location: Kernersville, NC, USA Posts: 793	Nice inlay Panday. Lew and Rick thanks! Those pictures are just what I needed. Steve

24th April 2006, 04:03 AM	#3
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,376	Ferg , you could easily make a ferrule like Lew's ; I would suggest using at least 6ga. Sterling sheet folded on the edge , formed around a ring mandrel and then soldered on a soldering mandrel while held together with iron wire . Of course your silver sheet will have to be fan shaped in outline . I'm willing to bet that Battara has the right equipment for this work . I used to . Silver is really fun to work with .