Filipino blade - what do I have here?

[kai]

Thanks all - I apologize for not responding earlier!

I agree that this is quite unlikely to be anything else but a full tang.

Unless the tang is fully corroded, this will be easy to check with Rob's suggestion; simple electric testers are now very cheap and will come in handy for similar tests, including the pins at the side.

Also strong magnets as suggested by Wayne come in handy for a variety of purposes.

I'll report back when I find a bit of time for a testing session!

Regards,
Kai

[RobT]

Hi Kai,

I knew it after I posted so I double checked myself online. My circuit instructions are incorrect (it has been a long while since I built a homemade continuity tester). The battery has to be connected to the two continuity tester probe wires, not the blade and the suspected tang. As you suggested, testers with built in batteries are relatively cheap and it would probably be best to just buy one. If you want to go the homemade way, I found four u-tube videos showing how.

Sincerely,
RobT