Brass Keris

kai · 13th January 2017, 06:33 PM

AFAIK, brass is not considered a good choice for a keris blade and also pure copper will be very soft unless work hardened. OTOH, there are a few genuine old keris crafted from bronze. For example, there is a really gorgeous keris buda which has been posted several times on this forum already...

Regards,
Kai

A. G. Maisey · 13th January 2017, 09:26 PM

Brass is an unacceptable metal for use in a keris, however bronze is an acceptable metal, and it is entirely possible that the bronze kerises that we occasionally encounter were intended for Hindu blood sacrifice, bronze being the designated metal for the sacrificial instrument used in some rituals of sacrifice.

David · 13th January 2017, 10:36 PM

I can certainly agree on the bronze front. These type of keris are, of course, rather rare and not often encountered. Any of these brass ones you are encountering on eBay or elsewhere claiming to be amulets or "magic keris" are pure junk though.

Jean · 14th January 2017, 04:47 PM

More than 20 years ago I saw an apparently old Javanese blade supposedly made from suasa (copper/ silver/ gold alloy) in a reputed antique shop in Jakarta. I did not buy it because I was not convinced that it was a genuine piece but somewhat regret it....

Pusaka · 14th January 2017, 06:09 PM

Quote:

Originally Posted by Jean

More than 20 years ago I saw an apparently old Javanese blade supposedly made from suasa (copper/ silver/ gold alloy) in a reputed antique shop in Jakarta. I did not buy it because I was not convinced that it was a genuine piece but somewhat regret it....

Some time ago I seen a Badik with a suasa blade. What really would be the use of such a blade other then as some type of amulet. I did like the colour of the blade though pinkish and no tarnishing as would be the case with brass, bronze or copper blades.

13th January 2017, 06:33 PM	#1
kai Member Join Date: Apr 2005 Posts: 3,255	AFAIK, brass is not considered a good choice for a keris blade and also pure copper will be very soft unless work hardened. OTOH, there are a few genuine old keris crafted from bronze. For example, there is a really gorgeous keris buda which has been posted several times on this forum already... Regards, Kai

13th January 2017, 09:26 PM	#2
A. G. Maisey Member Join Date: May 2006 Posts: 6,992	Brass is an unacceptable metal for use in a keris, however bronze is an acceptable metal, and it is entirely possible that the bronze kerises that we occasionally encounter were intended for Hindu blood sacrifice, bronze being the designated metal for the sacrificial instrument used in some rituals of sacrifice.

13th January 2017, 10:36 PM	#3
David Keris forum moderator Join Date: Aug 2006 Location: Nova Scotia Posts: 7,211	I can certainly agree on the bronze front. These type of keris are, of course, rather rare and not often encountered. Any of these brass ones you are encountering on eBay or elsewhere claiming to be amulets or "magic keris" are pure junk though.

14th January 2017, 04:47 PM	#4
Jean Member Join Date: Jun 2009 Posts: 1,740	More than 20 years ago I saw an apparently old Javanese blade supposedly made from suasa (copper/ silver/ gold alloy) in a reputed antique shop in Jakarta. I did not buy it because I was not convinced that it was a genuine piece but somewhat regret it....