Latest Mystery Sword

Rivkin · 10th February 2006, 12:02 AM

Sorry, my fault for just looking at the pictures without reading the text

.

ariel · 10th February 2006, 12:35 AM

The use of blue stones for decoration was very popular on Hungarian and Transylvanian swords. I agree with Michal(difficult to argue with him anyway: he always has the right answer!) that the Vienna markings nail the origin down to Austro-Hungarian Empire. I just think it is more Hungarian than Austrian.

Jim McDougall · 10th February 2006, 12:58 AM

I agree completely with Michal, this is a 19th c. example Ausro-Hungarian officers sabre, and as Ariel has noted, most likely Hungarian. It seems to me that many of the Hungarian example sabres carry these very light, often asymmetrically mounted blades, as well in contrast with the heavy, baroque hilts and mounts. I recall always thinking these were rather 'off' when I saw them and of thinking they were badly matched in the way the blades were mounted. I have actually never quite understood why these blades were so thin and light, however they are clearly intended as dress sabres rather than fighting swords.It also seems to me that the Austrian sabres were inclined to have heavier blades that were consistant with the hilts in which they were mounted, though that may be a broad assumption (no pun intended

As noted, the Ottoman influence on sword styles was well known in Eastern Europe for hundreds of years.During the Napoleonic campaigns in Egypt the Mameluke style hilt became popular as a military officers sabre form for not only the French and British, but other European armies as well as later in the U.S. The form remains that of the traditional sabre of the U.S. Marines.

Best regards,
jim

sabertasche · 10th February 2006, 05:33 AM

Wow, guys, I think I've found a great forum

The hallmarks are clearest on the hilt of the sabre, a circle, bisected. the lower half divided into 2 equal portions. The top segment has a 13 in it. Above this mark is a "A". The left side of the mark is a 1 above a 4. On the right side of the mark is a 8 above a 0 - 1840?. Directly above this hallmark is a M&K.

The engraving appears to be scribed. There doesn't appear to be any detail in the flags except that they appear as swallow-tailed.

So far I've oiled the blade as there was a patch of active rust near the tip. I took off the blue scabbard fabric as it was held on with common office tape. As I mentioned there was pieces of red canvas like material under the mounts which I assume was the original covering. I plan to reglue and cover the scabbard and make it complete and clean again.

The sword mounts, I've sprayed with Windex glass cleaner. This has a light solvent which cuts through dirt, grime and nicotine. Windex also has a very small amount of ammonia in it which cleans the crud off the gilding without stripping the gilt off the silver.

I'm using a soft tooth brush to gently scrub off difficult areas. I going very slow as I want to preserve as much of the enamelling as possible.

Hoepfully I haven't offended anyone with my conservation methods. The sword is FILTHY and the scabbard fabric was rotting and smelled of car urine. I've kept it - sealed in a zip-lock bag but it had to go.

I want to thank everyone for thier help in interpreting my new sword.

Cheers,

greg

wolviex · 10th February 2006, 07:36 AM

Quote:

Originally Posted by sabertasche

The hallmarks are clearest on the hilt of the sabre, a circle, bisected. the lower half divided into 2 equal portions. The top segment has a 13 in it. Above this mark is a "A". The left side of the mark is a 1 above a 4. On the right side of the mark is a 8 above a 0 - 1840?. Directly above this hallmark is a M&K.

So as I guessed. It is probably 1840, and letter "A" means Vienna. Still don't know what M&K means

Thanks for kind words - hey I'm not inerrable! Thanks for more strictly indication on Hungary as a place of origin, while I was wander on Austro-Hungarian Empire without clear purpose

regards

Jeff D · 10th February 2006, 08:00 AM

Hi Greg and welcome.

Is there anyway to show the entire blade? Is it shaped like a shamshir or a British cavalry M1796 ?

All the best
Jeff

P.S. Did I meet you in W.L.?

sabertasche · 10th February 2006, 05:42 PM

Thanks for the welcome Jeff. I haven't had my coffee yet so I don't know where W.L. is. We may have run into each othe at the HAC shows or in Kamloops.

I just had my coffee. Is W.L. just north of 100 Mile House and just south of Quesnel? (You just know all the the Forum memebers are on Google Earth trying to figure out where W.L. is

). If we're on the same page, yes, we've met

I got promoted out of that territory shortly after our meeting and was unable to followup our initial meet.

Looks like your interests have expanded beyond just Brit Cavalry like mine.

Greg

10th February 2006, 12:02 AM	#1
Rivkin Member Join Date: Dec 2004 Posts: 655	Sorry, my fault for just looking at the pictures without reading the text .

10th February 2006, 12:35 AM	#2
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	The use of blue stones for decoration was very popular on Hungarian and Transylvanian swords. I agree with Michal(difficult to argue with him anyway: he always has the right answer!) that the Vienna markings nail the origin down to Austro-Hungarian Empire. I just think it is more Hungarian than Austrian.

10th February 2006, 12:58 AM	#3
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 10,281	I agree completely with Michal, this is a 19th c. example Ausro-Hungarian officers sabre, and as Ariel has noted, most likely Hungarian. It seems to me that many of the Hungarian example sabres carry these very light, often asymmetrically mounted blades, as well in contrast with the heavy, baroque hilts and mounts. I recall always thinking these were rather 'off' when I saw them and of thinking they were badly matched in the way the blades were mounted. I have actually never quite understood why these blades were so thin and light, however they are clearly intended as dress sabres rather than fighting swords.It also seems to me that the Austrian sabres were inclined to have heavier blades that were consistant with the hilts in which they were mounted, though that may be a broad assumption (no pun intended As noted, the Ottoman influence on sword styles was well known in Eastern Europe for hundreds of years.During the Napoleonic campaigns in Egypt the Mameluke style hilt became popular as a military officers sabre form for not only the French and British, but other European armies as well as later in the U.S. The form remains that of the traditional sabre of the U.S. Marines. Best regards, jim

10th February 2006, 05:33 AM	#4
sabertasche Member Join Date: Feb 2006 Location: Vancouver, BC Posts: 149	Wow, guys, I think I've found a great forum The hallmarks are clearest on the hilt of the sabre, a circle, bisected. the lower half divided into 2 equal portions. The top segment has a 13 in it. Above this mark is a "A". The left side of the mark is a 1 above a 4. On the right side of the mark is a 8 above a 0 - 1840?. Directly above this hallmark is a M&K. The engraving appears to be scribed. There doesn't appear to be any detail in the flags except that they appear as swallow-tailed. So far I've oiled the blade as there was a patch of active rust near the tip. I took off the blue scabbard fabric as it was held on with common office tape. As I mentioned there was pieces of red canvas like material under the mounts which I assume was the original covering. I plan to reglue and cover the scabbard and make it complete and clean again. The sword mounts, I've sprayed with Windex glass cleaner. This has a light solvent which cuts through dirt, grime and nicotine. Windex also has a very small amount of ammonia in it which cleans the crud off the gilding without stripping the gilt off the silver. I'm using a soft tooth brush to gently scrub off difficult areas. I going very slow as I want to preserve as much of the enamelling as possible. Hoepfully I haven't offended anyone with my conservation methods. The sword is FILTHY and the scabbard fabric was rotting and smelled of car urine. I've kept it - sealed in a zip-lock bag but it had to go. I want to thank everyone for thier help in interpreting my new sword. Cheers, greg

10th February 2006, 08:00 AM	#6
Jeff D Member Join Date: Dec 2004 Location: B.C. Canada Posts: 473	Hi Greg and welcome. Is there anyway to show the entire blade? Is it shaped like a shamshir or a British cavalry M1796 ? All the best Jeff P.S. Did I meet you in W.L.?

10th February 2006, 05:42 PM	#7
sabertasche Member Join Date: Feb 2006 Location: Vancouver, BC Posts: 149	Thanks for the welcome Jeff. I haven't had my coffee yet so I don't know where W.L. is. We may have run into each othe at the HAC shows or in Kamloops. I just had my coffee. Is W.L. just north of 100 Mile House and just south of Quesnel? (You just know all the the Forum memebers are on Google Earth trying to figure out where W.L. is ). If we're on the same page, yes, we've met I got promoted out of that territory shortly after our meeting and was unable to followup our initial meet. Looks like your interests have expanded beyond just Brit Cavalry like mine. Greg