Afghan Rifle Combination Tool

BANDOOK · 2nd January 2016, 10:53 AM

NICE TOOL RICK,I LOST ONE ON EBAY A MONTH BACK,NICE FOR YOUR JEZAIL COLLECTION,CHEERS

rickystl · 3rd January 2016, 10:54 AM

Hi Bandook.
Actually, my gunsmith sent me the Link to this item. Otherwise, I wouldn't have known it was up for auction. LOL So I was lucky in that regard. I took one look at it and knew I had to have it. An authentic addition to the Afghan belt. Thanks.
Rick.

Tony PP · 4th January 2016, 10:37 AM

Hello, I have a small primer flask looking nearly the same as yours but without the tool. Mine is missing the part from the larger end. All there is is a hollow with a small threaded hole in the middle. I have seen one before that had a small knob that flared out to fit the inside hollow, threaded on the other side and finished with the remains of what looked like a touch hole pricker. It would certainly be easier to fill from the spout end.
Where mine was made -- I have no idea but I was given it in Dara Adam a village on the Pakistan border.
Have fun getting the screw out

rickystl · 9th January 2016, 05:36 PM

Quote:

Originally Posted by Tony PP

Hello, I have a small primer flask looking nearly the same as yours but without the tool. Mine is missing the part from the larger end. All there is is a hollow with a small threaded hole in the middle. I have seen one before that had a small knob that flared out to fit the inside hollow, threaded on the other side and finished with the remains of what looked like a touch hole pricker. It would certainly be easier to fill from the spout end.
Where mine was made -- I have no idea but I was given it in Dara Adam a village on the Pakistan border.
Have fun getting the screw out

Hi Tony.
Yes, your's looks very similar to mine. If I can get the screw removed from mine, the interior may look like yours. So the end piece under the screw of mine may be shaped like more of a plug versus a flat plate. Hmmmm. I'll keep soaking it every week and hope I can remove it. Now that I've seen the photo of yours, I'm really curious. And curious minds want to know. LOL

It's really hard to tell on mine that there is a seperate end piece, but it's there. Thanks for posting yours.
Rick.

BANDOOK · 5th January 2016, 08:13 AM

Quote:

Originally Posted by rickystl

Hi Bandook.
Actually, my gunsmith sent me the Link to this item. Otherwise, I wouldn't have known it was up for auction. LOL So I was lucky in that regard. I took one look at it and knew I had to have it. An authentic addition to the Afghan belt. Thanks.
Rick.

CHEERS RICK GOOD BUYING,ALWAYS LOVE THESE AUTHENTIC ACESSORIES
REGARDS RAJESH

Tony PP · 5th January 2016, 03:18 PM

It's raining and I was bored so time for a little play. First, check out the thread in the end of the flask, seems to be a old Whitworth one, still bored so decided to make up something from memory. Happy with the results but would like to see what yours looks like as a comparison. Obviously a bit new at the moment but that will not be a problem.

The other flask , nothing special and haven't a clue where from or in fact how I even got it but I like it.

rickystl · 9th January 2016, 05:50 PM

Quote:

Originally Posted by Tony PP

It's raining and I was bored so time for a little play. First, check out the thread in the end of the flask, seems to be a old Whitworth one, still bored so decided to make up something from memory. Happy with the results but would like to see what yours looks like as a comparison. Obviously a bit new at the moment but that will not be a problem.

The other flask , nothing special and haven't a clue where from or in fact how I even got it but I like it.

Hi again Tony.
Hey !! Great job making that threaded end piece !!! Looks much better now. Excellent. I'll re-post if I get the screw out of mine.
Seems like we both think alike. LOL Here is a Persian style priming flask that I picked up at the Baltimore Show about three years ago. It was missing it's end screw. So my gunsmith made me a new screw utilizing an original top jaw screw from a 3rd Model British Brown Bess musket (That was broken and messed up). Turned out nice. And the flask is 100% usable.
Again, great job with the screw/vent pick idea.
Rick.

stenoyab · 9th January 2016, 06:33 PM

Hi, Interesting to see your tool, heres a similar one I found still attached to its powder flask rig.

I'd always thought mine is more North African from the style of the flask, but I guess these were widely spread in useage.

Do any of you collect Indian/Afghan bullet molds ?, I've been trying without any success to try and find a source to ID the various regional variations.

4th January 2016, 10:37 AM	#3
Tony PP Member Join Date: Oct 2012 Posts: 26	another primer flask Hello, I have a small primer flask looking nearly the same as yours but without the tool. Mine is missing the part from the larger end. All there is is a hollow with a small threaded hole in the middle. I have seen one before that had a small knob that flared out to fit the inside hollow, threaded on the other side and finished with the remains of what looked like a touch hole pricker. It would certainly be easier to fill from the spout end. Where mine was made -- I have no idea but I was given it in Dara Adam a village on the Pakistan border. Have fun getting the screw out Attached Images

5th January 2016, 03:18 PM	#6
Tony PP Member Join Date: Oct 2012 Posts: 26	Missing End It's raining and I was bored so time for a little play. First, check out the thread in the end of the flask, seems to be a old Whitworth one, still bored so decided to make up something from memory. Happy with the results but would like to see what yours looks like as a comparison. Obviously a bit new at the moment but that will not be a problem. The other flask , nothing special and haven't a clue where from or in fact how I even got it but I like it. Attached Images

9th January 2016, 06:33 PM	#8
stenoyab Member Join Date: Dec 2004 Posts: 43	Complete rig Hi, Interesting to see your tool, heres a similar one I found still attached to its powder flask rig. I'd always thought mine is more North African from the style of the flask, but I guess these were widely spread in useage. Do any of you collect Indian/Afghan bullet molds ?, I've been trying without any success to try and find a source to ID the various regional variations. Attached Images Last edited by stenoyab; 9th January 2016 at 10:19 PM.

2nd January 2016, 10:53 AM	#1
BANDOOK Member Join Date: Jun 2013 Location: AUCKLAND,NEW ZEALAND Posts: 627	NICE TOOL RICK,I LOST ONE ON EBAY A MONTH BACK,NICE FOR YOUR JEZAIL COLLECTION,CHEERS

3rd January 2016, 10:54 AM	#2
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,633	Hi Bandook. Actually, my gunsmith sent me the Link to this item. Otherwise, I wouldn't have known it was up for auction. LOL So I was lucky in that regard. I took one look at it and knew I had to have it. An authentic addition to the Afghan belt. Thanks. Rick.