![]() |
![]() |
#12 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,211
|
![]() Quote:
![]() The pamor is part of the blade itself. You are not going to remove that with a toothbrush and some oil. I am not sure how you are using the word patina here. If you are referring to the contrasting colors of the blade that is created when the blade is treated with warangan, a combination of arsenic and lime juice. The arsenic reacts with the iron in the blade turning it dark in varying shades dependent upon the content of the various irons used. Nickelous material often used in pamor stays silvery. But this effect has nothing to due with patina. Removing the rust with oil and a toothbrush should not remove this effect nor should it change the texture of the surface. I do recommend that you do all you can to remove all the rust, not just the active red stuff. This will no doubt take time and repeated attention to the blade. You may find it necessary to pick at some of it with a fine needle under a magnifying glass to remove it all. Work slowly and carefully and this should not damage the blade any. What you have on this blade more than what i would call "patina" is dirt and rust. Removing that should increase the contrast of the pattern and make this blade seem more alive. ![]() Last edited by David; 20th November 2015 at 06:40 PM. |
|
![]() |
![]() |
|
|