A Nimcha

Ibrahiim al Balooshi · 6th March 2014, 06:58 AM

Quote:

Originally Posted by A.alnakkas

I dont see a reason why these are locally applied. Omani's do apply a crown on their recently made weapons but we are talking about North African weapons here and North African weapons tend to have European blades quite often.

Salaams A.alnakkas . I think the reason that they are applied is to raise the price...or reflect some sort of recognisable, admirable prowess in the weapon. I have identified the workshop that adds Taj stamps in Ras Al Khaimah. I own a few myself. There are many blades either rehilted and stamped there or just rehilted... The latest one is a Karabela ~ I dont have a picture but the souk is on our doorstep (500 yards)so I will try to obtain. Many blades of European manufacture flood in through the Red Sea region not least rehilted Ethiopian (originally German) blades curved and straight, via Sanaa..Yemen. These blades now appear in quantity in Muscat, Salalah and Sharjah ...such is the situation these days.

It is, however, a bit puzzling since though we see Taj crowns they are not accompanied by the VR strike... at least I have not seen one yet.. In addition the crown style is not the same leading me to suggest a different stamp location ...who knows where? For examples of RAK stamps see http://www.vikingsword.com/vb/showth...ght=omani+sayf at #318 and #326.

Regards,
Ibrahiim al Balooshi.

blue lander · 6th March 2014, 12:33 PM

Here's one more from the lot I didn't win. I suppose it isn't a Nimcha, though

Ibrahiim al Balooshi · 6th March 2014, 02:44 PM

Hi Blue Lander~ we have to see the whole item please...oh you say you didnt win those so maybe no pictures...ok... Looks like hogs back or eye lash, fairly typical stamps, flanked by a series of dots that could be celestial...

Regards,
Ibrahiim al Balooshi

Jim McDougall · 6th March 2014, 04:40 PM

Back to the original question on Moroccan sa'if (collectively termed 'nimcha' typically), the blades on these seem invariably to be European, most commonly of course German trade blades or other imports. While these are actually sabres, in many cases they are mounted with straight backsword blades, and of course the variations go on.

On that note, regarding the VR crown on this example, this is a remarkably well done example, and I would note that in Gilkerson ("Boarders Away" 1991, p.88) images are shown of a catalog from Schnitzler & Kirshbaum believed mid 19th c. This Solingen firm was producing many blades of 'cutlass' form in variation, many with triple fullers as on this example.
One of the 'cutlass' blades was shown with a crown/GR stamp in the same center blade location. This was of course the Georgian cypher often seen on early British naval cutlasses (1804).
It is indicated that these blades of much earlier form were produced for export by this firm well through the 19th c. so I wonder if it would not be reasonable to presume that the same crown and VR might be placed on these long venerated blades in Solingen by this firm or another? The various celestial type motif seem to further suggest Solingen mfg.

On the second sword shown, the components resemble European officers hilt elements (possibly French) obviously rehilted, and the marks on the blade are rather unusual interpretations of European marks often termed 'cogwheels' (often seen also as stars or sun with radiating lines as well) placed in also unusual context with the 'sickle' marks of European use so popularly used on 'trade' blades.
This configuration resembles other stamped groupings sometimes associated with this Solingen firm, but in most cases these are stars.

These blades seem very likely Solingen imports which may have entered North Africa through any number of entrepots, but do seem 19th century, though probably late. In my own opinion I have always considered these admittedly composite swords quite intriguing as they do have an interesting history of their own despite their often later fabrication.

It remains possible that such stamped markings, in this case with the crowned cypher, may have been stamped locally in one of these entrepots, however it is important to note that Solingen was quite notably involved of course in the use of spurious stamps, marks, inscriptions etc. as well .

I would also note, in a distant context, that in Khyber regions of India's northwest (now Pakistan), the spurious stamping of EIC marks as well as VR marks etc. were placed on modernly reproduced weapons into recent times.

Ibrahiim al Balooshi · 6th March 2014, 04:51 PM

Hunting about in Library I note the interesting situation with Naval Cutlasses and the GR, WR, and VR marks ..see http://www.vikingsword.com/vb/showth...ia+blade+stamp

For spirals in the tunic ..though depicted holding a sword see http://www.vikingsword.com/vb/showth...ht=peter+munch

Regards,
Ibrahiim al Balooshi.

blue lander · 6th March 2014, 09:21 PM

So it's most likely the nimcha blade in my original post is European? The blade's only 3mm thick and 28mm wide at its blade. It just seems thin.

spiral · 6th March 2014, 10:15 PM

Quote:

Originally Posted by Ibrahiim al Balooshi

Hunting about in Library I note the interesting situation with Naval Cutlasses and the GR, WR, and VR marks ..see http://www.vikingsword.com/vb/showth...ia+blade+stamp .

Theres a lot of Crown & monarch fakes around... similar stamps appear on some old kukri from India. {probably 20s Id guess..] as well as the African machete I showed earlier in the thread...

Quote:

Originally Posted by Ibrahiim al Balooshi

For spirals in the tunic ..though depicted holding a sword see http://www.vikingsword.com/vb/showth...ht=peter+munch
.

Ahhhh ! You have photos of me in my magnificent tunic! Armed with a sword! Excellent! Please enjoy them!

spiral

Ibrahiim al Balooshi · 7th March 2014, 03:52 PM

Quote:

Originally Posted by spiral

Theres a lot of Crown & monarch fakes around... similar stamps appear on some old kukri from India. {probably 20s Id guess..] as well as the African machete I showed earlier in the thread...

Ahhhh ! You have photos of me in my magnificent tunic! Armed with a sword! Excellent! Please enjoy them!

spiral

Salaams Spiral ! Spirals on Spirals so to speak !

Regards,
Ibrahiim al Balooshi

6th March 2014, 12:33 PM	#2
blue lander Member Join Date: Nov 2013 Posts: 456	Here's one more from the lot I didn't win. I suppose it isn't a Nimcha, though Attached Images

6th March 2014, 02:44 PM	#3
Ibrahiim al Balooshi Member Join Date: Jul 2006 Location: Buraimi Oman, on the border with the UAE Posts: 4,408	Hi Blue Lander~ we have to see the whole item please...oh you say you didnt win those so maybe no pictures...ok... Looks like hogs back or eye lash, fairly typical stamps, flanked by a series of dots that could be celestial... Regards, Ibrahiim al Balooshi

6th March 2014, 04:40 PM	#4
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 10,195	Back to the original question on Moroccan sa'if (collectively termed 'nimcha' typically), the blades on these seem invariably to be European, most commonly of course German trade blades or other imports. While these are actually sabres, in many cases they are mounted with straight backsword blades, and of course the variations go on. On that note, regarding the VR crown on this example, this is a remarkably well done example, and I would note that in Gilkerson ("Boarders Away" 1991, p.88) images are shown of a catalog from Schnitzler & Kirshbaum believed mid 19th c. This Solingen firm was producing many blades of 'cutlass' form in variation, many with triple fullers as on this example. One of the 'cutlass' blades was shown with a crown/GR stamp in the same center blade location. This was of course the Georgian cypher often seen on early British naval cutlasses (1804). It is indicated that these blades of much earlier form were produced for export by this firm well through the 19th c. so I wonder if it would not be reasonable to presume that the same crown and VR might be placed on these long venerated blades in Solingen by this firm or another? The various celestial type motif seem to further suggest Solingen mfg. On the second sword shown, the components resemble European officers hilt elements (possibly French) obviously rehilted, and the marks on the blade are rather unusual interpretations of European marks often termed 'cogwheels' (often seen also as stars or sun with radiating lines as well) placed in also unusual context with the 'sickle' marks of European use so popularly used on 'trade' blades. This configuration resembles other stamped groupings sometimes associated with this Solingen firm, but in most cases these are stars. These blades seem very likely Solingen imports which may have entered North Africa through any number of entrepots, but do seem 19th century, though probably late. In my own opinion I have always considered these admittedly composite swords quite intriguing as they do have an interesting history of their own despite their often later fabrication. It remains possible that such stamped markings, in this case with the crowned cypher, may have been stamped locally in one of these entrepots, however it is important to note that Solingen was quite notably involved of course in the use of spurious stamps, marks, inscriptions etc. as well . I would also note, in a distant context, that in Khyber regions of India's northwest (now Pakistan), the spurious stamping of EIC marks as well as VR marks etc. were placed on modernly reproduced weapons into recent times.

6th March 2014, 04:51 PM	#5
Ibrahiim al Balooshi Member Join Date: Jul 2006 Location: Buraimi Oman, on the border with the UAE Posts: 4,408	Hunting about in Library I note the interesting situation with Naval Cutlasses and the GR, WR, and VR marks ..see http://www.vikingsword.com/vb/showth...ia+blade+stamp For spirals in the tunic ..though depicted holding a sword see http://www.vikingsword.com/vb/showth...ht=peter+munch Regards, Ibrahiim al Balooshi.

6th March 2014, 09:21 PM	#6
blue lander Member Join Date: Nov 2013 Posts: 456	So it's most likely the nimcha blade in my original post is European? The blade's only 3mm thick and 28mm wide at its blade. It just seems thin.