Queen Anne Night pistol

G.William · 10th June 2013, 02:58 AM

If looked at closely there are remnants of gold leaf on shallow areas of brass. Carved into the furniture under the lock are roman numerals. Will post what I find tomorrow.
good night gents......

Andreas · 10th June 2013, 08:49 AM

In a Paris sale in 2000, a pair of flintlock pistols were auctioned, the locks signed J. CAMBIER A NAMUR and the barrels ESQUIBEL EN MADRID ANNO 1719.
A Jacques Cambier, armourer, is mentioned as active in 1779-80 in Namur:

Quote:

Jacques Cambier, armurier à Namur, contre Amélie-Thérèse de
Hochsteden, chanoinesse de Susteren, au sujet du payement de
marchandises et de travaux pour le baron de Moitrey, 1779-1780.

(From the State Archives in Belgium/Provincial Council of Namur)
Regards
Andreas

fernando · 10th June 2013, 12:12 PM

If they are small numbers ( I II III IV ) they could be for assembly control. The French (and not only) fancied such system. In those days the gun parts were hand made and not all came out with the same precise dimensions; this way in the final assembly they could join the parts that were made to fit one each other in the beginning of the production line.
This is only a suggestion, of course

.

M ELEY · 11th June 2013, 01:35 AM

A gold wash was not uncommon on higher grade pistols and dueling pieces of the period. What is the lenth of the gun? It could have been one of a pair, not an uncommon occurance. I particularly like the lion butt plate. Mostly, you see human faces or leering gargoyles here...

G.William · 11th June 2013, 04:01 AM

Well I took the piece apart. See IV mark and length of pistol. All screws seem to be original. I don't have mic. or caliper, so bore is measured at 15 mm.

10th June 2013, 02:58 AM	#1
G.William Member Join Date: Apr 2013 Posts: 9	If looked at closely there are remnants of gold leaf on shallow areas of brass. Carved into the furniture under the lock are roman numerals. Will post what I find tomorrow. good night gents...... Last edited by G.William; 10th June 2013 at 09:28 AM.

11th June 2013, 04:01 AM	#5
G.William Member Join Date: Apr 2013 Posts: 9	Well I took the piece apart. See IV mark and length of pistol. All screws seem to be original. I don't have mic. or caliper, so bore is measured at 15 mm. Attached Images

10th June 2013, 12:12 PM	#3
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	If they are small numbers ( I II III IV ) they could be for assembly control. The French (and not only) fancied such system. In those days the gun parts were hand made and not all came out with the same precise dimensions; this way in the final assembly they could join the parts that were made to fit one each other in the beginning of the production line. This is only a suggestion, of course .

11th June 2013, 01:35 AM	#4
M ELEY Member Join Date: Dec 2004 Location: NC, U.S.A. Posts: 2,141	A gold wash was not uncommon on higher grade pistols and dueling pieces of the period. What is the lenth of the gun? It could have been one of a pair, not an uncommon occurance. I particularly like the lion butt plate. Mostly, you see human faces or leering gargoyles here...