Yataghan and markings - ID and comments, please

[ALEX]

I agree, it looks "real", i.e. not just wall decoration. The blade shows some Ottoman insignia and coat of arms (and could be european trade blade, such as Zolingen. Any stamps at the base by forte?). The hilt is retrofitted Karabella-styled, also Ottoman type hilt. The later crossguard of that form is not unusual, although not common. It is impossible to determine without seeing it complete, can wee see the whole sword, and how about other two swords?:-)

[longfellow]

Hi Alex,

Thank you for the info. No, no other markings that I can see.

Here's a photo of the three. I should note that the change in color on the blades is probably because they were hanging near the fireplace (but not too near) in a wooden carving of a shield with a family crest and had been there since the 70's.

The middle one has a stamped (?) copper grip and pommel and a note on a small string tag saying '3rd crusade'. Length is 42" , the guard is a hair over 6", grip and pommel about 5 3/4" long.

The bottom sword may well be 'decorative'. About 39" in length, looks like a cast grip and guard that a magnetic sticks to, guard 6 1/4" across and grip about 7 1/4" long.

It looks like my dad used something of each of the first 3 decades he had been actively collecting - bottom acquired 1958, middle acquired 1975 and top acquired 1965

[YataganMan]

Dear Member,
The picture you have submitted is not of a yatagan but is of a heinz 57 variety,
First of all Yatagans we know of do not have cross guards and are not as broad
and straight ( with the exception of some sırbian produce ).The blade is a typical european manufactured ( most possibly Hungarian) commercial blade supplıed to the Turkish/Ottoman market.The hilt is a sword hilt common in 18/19 centuries.The cross guard does not belong to the hilt as you will see it was made for a different type cross guard(pls note the bedding for the tang on the hilt)and its a later reproduction of 16 century Ottoman type cross guard.
But it is an old sword probably around 200 years old.Enjoy it.
Regards

[Iain]

Not to derail the thread but the middle sword is a kaskara - a Sudanese sword. Likely a 19th or early 20th century piece. Looks quite nice and might just deserve a thread of its own.

[longfellow]

Originally Posted by Iain

Not to derail the thread but the middle sword is a kaskara - a Sudanese sword. Likely a 19th or early 20th century piece. Looks quite nice and might just deserve a thread of its own.

Hello Iain,

There is a saying: Ask and ye shall receive.

I will be glad to start a thread for the Kaskara. I handled one from my dad's collection some time back and should have recognized it. However, this one, with the work on the hilt and pommel sort of put me on a wrong trail. The other one seemed much more crude while the work on this one is, ah, nice. A thread will give me a chance to show good photos of it, too. Thank you for the nudge.

[ALEX]

Originally Posted by YataganMan

Dear Member,
The picture you have submitted is not of a yatagan but is of a heinz 57 variety...

Not exactly. This is a variety of yataghan! As I mentioned, these variations with karabella-like crossquards and hits are rare. Here's one with shamshir cross: http://www.oriental-arms.com/item.php?id=2866
The blade was made in yat form and for yat. This form is also known on Polish yats and used by the Hungarian mountaneers of late 18th Century (Pandours).

[YataganMan]

Dear Alex ,
Thank you for your valuable contribution in re above but the picture you supplied (oriental arms )does confirm the point I made where it just says Yatagan STYLE Turkish Sword and furher in 18oo's some european nations supplıed their military rifles with yatagan bayonets ,can we consider both of these Yatagans ?İf an edged weapon lacks the typical characsteristics of(recurve blades,eared handles small or big and hilts without guards ) it can not be classed as yatagans.Just resemblence of one part ie the blade does not qualify it being a yatagan.The original post named that sword Yatagan and I only wanted to correct the terminology and the concept.
Best regards

[longfellow]

Originally Posted by YataganMan

Dear Alex ,
Thank you for your valuable contribution in re above but the picture you supplied (oriental arms )does confirm the point I made where it just says Yatagan STYLE Turkish Sword and furher in 18oo's some european nations supplıed their military rifles with yatagan bayonets ,can we consider both of these Yatagans ?İf an edged weapon lacks the typical characsteristics of(recurve blades,eared handles small or big and hilts without guards ) it can not be classed as yatagans.Just resemblence of one part ie the blade does not qualify it being a yatagan.The original post named that sword Yatagan and I only wanted to correct the terminology and the concept.
Best regards

YataghanMan,
Thank you for your observations about this not being a 'true form' yataghan in the traditional sense of the original term. I shoulld like to point out, though, that a Rolls Royce is a car though it is a far cry its ancestor the Model A or its contemporary the Volt. However, that is beside the point. If you will notice in my OP, there is a question mark after the word 'Yataghan'. I did not name the sword a yataghan, I was, in essence, asking if it was. I do appreciate your input and, as I said, your observations.

[ariel]

Such yataghans are well represented in Elgood's book on Balkan weaponry: Greek naval yataghan.

[longfellow]

Originally Posted by ariel

Such yataghans are well represented in Elgood's book on Balkan weaponry: Greek naval yataghan.

Hello ariel,

Thank you for the reference. As I've always found, you are a great contributor. I will see if I can find a copy of Elgood's book, especially since I've always liked the Balkan edged weapons (I still have the Black Sea yataghan - it ain't gonna see the light of day in my lifetime). Thank you, again, for taking the time to post.

[T. Koch]

Hi longfellow!

Cool swords, I especially like the yataghan! If you could post some close-ups of the hilt - particularly from the pommel-end - I might be able to tell you the material it was carved from. From the photo's already posted above, I think it could be rhino horn.

Thanks for sharing them!


Have a great weekend, - Thor

[longfellow]

Originally Posted by ALEX

Not exactly. This is a variety of yataghan! As I mentioned, these variations with karabella-like crossquards and hits are rare. Here's one with shamshir cross: http://www.oriental-arms.com/item.php?id=2866
The blade was made in yat form and for yat. This form is also known on Polish yats and used by the Hungarian mountaneers of late 18th Century (Pandours).

Hello Alex,

Thank you for the information and the sources that you have shared. I know just enough about edged weapons to be, well, I guess, dangerous - to myself, that is. I know a bit more than a little, but very far from enough. I hadn't even begun to begin to think about something other than Turkish. I only wish I had the time to study so many more things than I'm already trying to. Again, thank you.