Kampilan for comment

philkid · 13th September 2005, 05:24 PM

Kaw nga marami dyan Bob eh!

Do we have the same sources? I have runners in Cotabato. I don't get much from Marawi or Lanao nowadays coz nakuha mo na ata lahat.

Yep I'm from Davao. Just message me when you happen to pass by.

Ahriman · 13th September 2005, 05:31 PM

Very-very nice... the looks-quality compensate for the lack of that little hook I love. And I prefer slimmer and longer hilts. Hm, I'm far from an expert, but you wanted comments...

Have anyone ever tried out that "hook" on mail BTW? I did with the one I made on riveted mail, and the result was creepy... 16ga riveted flat "iron" links are torn in a HUGE area with a single-hand, but strong, slash. I wouldn't want to meet a kampilan-wielder if I were in a moro brass m&p suit with butted links...

Battara · 13th September 2005, 08:55 PM

Bob, sterling silver is 92.5% pure silver and 7.5% copper as an alloy. Coin silver is 80% silver and the rest usually copper. I would expect that "low grade silver" may really be considered anywhere from 80%-75% pure silver (or less) with copper making up the rest. In this range, this is the reason why many silver fittings on old Moro/PI stuff have a pinkish hue to them - it's the copper content.

One day when I grow up (and have money

) I'll have one of these too.

13th September 2005, 05:24 PM	#1
philkid Member Join Date: Mar 2005 Location: Philippines Posts: 52	Kaw nga marami dyan Bob eh! Do we have the same sources? I have runners in Cotabato. I don't get much from Marawi or Lanao nowadays coz nakuha mo na ata lahat. Yep I'm from Davao. Just message me when you happen to pass by.

13th September 2005, 05:31 PM	#2
Ahriman Member Join Date: Sep 2005 Location: Hungary Posts: 72	Very-very nice... the looks-quality compensate for the lack of that little hook I love. And I prefer slimmer and longer hilts. Hm, I'm far from an expert, but you wanted comments... Have anyone ever tried out that "hook" on mail BTW? I did with the one I made on riveted mail, and the result was creepy... 16ga riveted flat "iron" links are torn in a HUGE area with a single-hand, but strong, slash. I wouldn't want to meet a kampilan-wielder if I were in a moro brass m&p suit with butted links...

13th September 2005, 08:55 PM	#3
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,342	Bob, sterling silver is 92.5% pure silver and 7.5% copper as an alloy. Coin silver is 80% silver and the rest usually copper. I would expect that "low grade silver" may really be considered anywhere from 80%-75% pure silver (or less) with copper making up the rest. In this range, this is the reason why many silver fittings on old Moro/PI stuff have a pinkish hue to them - it's the copper content. One day when I grow up (and have money ) I'll have one of these too.