Samar Bolo

Robert · 21st August 2012, 07:32 PM

Hello Detlef, and thank you for your kind words. In am sorry about out bidding you on this. That is one of the things that I do not like about eprays not letting you see who the other bidders are. You are right though, it was a very good price.

The main reasons that make me think that this is from Samar and not Luzon are the facts that the blade is chisel ground, the tang does not extend all the way through the hilt and the style of carving on the hilt itself. Of course I could be completely wrong in my opinion on this, and that is why I was hoping for the opinions of the experts.

Regards,
Robert

Sajen · 21st August 2012, 07:41 PM

Quote:

Originally Posted by Robert Coleman

Hello Detlef, and thank you for your kind words. In am sorry about out bidding you on this. That is one of the things that I do not like about eprays not letting you see who the other bidders are.
Regards,
Robert

No problem Robert! On the other hand it's good for the seller because many would do it like you, I am as well.

Sajen · 21st August 2012, 07:46 PM

Quote:

Originally Posted by Robert Coleman

The main reasons that make me think that this is from Samar and not Luzon are the facts that the blade is chisel ground, the tang does not extend all the way through the hilt and the style of carving on the hilt itself. Of course I could be completely wrong in my opinion on this, and that is why I was hoping for the opinions of the experts.

Regards,
Robert

Very good points! Do you know swords with similar hilts from Samar? I am curious as well what the experts will tell. This is what I like by this forum, you can learn so much!

Robert · 21st August 2012, 08:02 PM

Hello Detlef, Here is a link to another one of my bolos that was identified as being from Samar. http://www.vikingsword.com/vb/showpo...6&postcount=12

Robert

Sajen · 21st August 2012, 08:24 PM

Quote:

Originally Posted by Robert Coleman

Hello Detlef, Here is a link to another one of my bolos that was identified as being from Samar. http://www.vikingsword.com/vb/showpo...6&postcount=12

Robert

Yes, I see what you mean!

Robert · 24th August 2012, 05:10 AM

The bolo arrived today and is in great shape except for some very minor damage to the wooden hilt and a small bend to the tip of the blade that can be straightened very easily. The total length is 20-3/4 inches with a 16 inch blade. The blade is 1-1/2 inches at its widest point and 1/4 inch thick at the hilt. All in all a very fast weapon for slashing and stabbing. Still hoping that someone can tell me more about this.

Regards,
Robert

VANDOO · 24th August 2012, 05:56 AM

THIS IS THE CLOSEST THING TO YOURS I HAVE IN MY COLLECTION. THIS ONE IS MARKED AND IS FROM CEBU WHICH IS NOT THAT FAR FROM SAMAR. I HAVE NOT SEEN THIS FORM OF CARVED HANDLE MUCH BUT OUR TWO EXAMPLES WOULD INDICATE IT WAS A KNOWN FORM BUT NOT A COMMON ONE IN MY EXPERIENCE.

Robert · 24th August 2012, 07:50 PM

Hello Barry, and thank you for posting the pictures of your bolo for comparison. Not only are the hilt carvings very similar but the blades are also very similar in their overall appearance. The main difference between the two would be the angle of the hilts. I have only seen one example of a marked bolo from Samar and the hilt carving was almost identical to the one I have shown above. Unfortunately when I found it I had just purchased another item for my collection and was short on cash and had to let it pass. Of course now it has been sold. Does your bolo have a chisel ground blade as I cannot tell by the photo?

Regards,
Robert

24th August 2012, 05:56 AM	#7
VANDOO (deceased) Join Date: Dec 2004 Location: OKLAHOMA, USA Posts: 3,138	THIS IS THE CLOSEST THING TO YOURS I HAVE IN MY COLLECTION. THIS ONE IS MARKED AND IS FROM CEBU WHICH IS NOT THAT FAR FROM SAMAR. I HAVE NOT SEEN THIS FORM OF CARVED HANDLE MUCH BUT OUR TWO EXAMPLES WOULD INDICATE IT WAS A KNOWN FORM BUT NOT A COMMON ONE IN MY EXPERIENCE. Attached Images

21st August 2012, 07:32 PM	#1
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Hello Detlef, and thank you for your kind words. In am sorry about out bidding you on this. That is one of the things that I do not like about eprays not letting you see who the other bidders are. You are right though, it was a very good price. The main reasons that make me think that this is from Samar and not Luzon are the facts that the blade is chisel ground, the tang does not extend all the way through the hilt and the style of carving on the hilt itself. Of course I could be completely wrong in my opinion on this, and that is why I was hoping for the opinions of the experts. Regards, Robert

21st August 2012, 08:02 PM	#4
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Hello Detlef, Here is a link to another one of my bolos that was identified as being from Samar. http://www.vikingsword.com/vb/showpo...6&postcount=12 Robert

24th August 2012, 05:10 AM	#6
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	The bolo arrived today and is in great shape except for some very minor damage to the wooden hilt and a small bend to the tip of the blade that can be straightened very easily. The total length is 20-3/4 inches with a 16 inch blade. The blade is 1-1/2 inches at its widest point and 1/4 inch thick at the hilt. All in all a very fast weapon for slashing and stabbing. Still hoping that someone can tell me more about this. Regards, Robert

24th August 2012, 07:50 PM	#8
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Hello Barry, and thank you for posting the pictures of your bolo for comparison. Not only are the hilt carvings very similar but the blades are also very similar in their overall appearance. The main difference between the two would be the angle of the hilts. I have only seen one example of a marked bolo from Samar and the hilt carving was almost identical to the one I have shown above. Unfortunately when I found it I had just purchased another item for my collection and was short on cash and had to let it pass. Of course now it has been sold. Does your bolo have a chisel ground blade as I cannot tell by the photo? Regards, Robert