Kora/khuda/khunda

spiral · 23rd April 2012, 11:12 PM

Hi Timo, well distal taper is always good in a blade, Helps stop it snapping under duress, after all.

They should be differntialy hardend if for use but the very tips are likely to be left soft judging from kukri, {Ive never etched a kora/khonra etc.}

if you can lightly etch it you will see whether the man who made it , made for it to be potentialy used or purely a wallhanger.Post ww2 does seem likely, I agree.

Who it was made for, as with many ethnographic weapons from that area we will probably never know. Beheading buffalo is there main job today if made for locals.

Spiral

Timo Nieminen · 30th May 2012, 10:00 AM

Here is another. A bit shabby, with a big bend in the blade at about 20", about 10-15 degrees. Perhaps I can straighten it, if I feel the need.

My first impression was that it would be a bit of a pig to try to fight with, a rather heavy and unwieldy brute ("only" 1.36kg, but still a pig). Maybe OK for dealing with unmoving sacrifical targets.

Berkley · 30th May 2012, 03:23 PM

I believe the blade is not original to the hilt. The blade is considerably wider than the bolster, and its design seems ungainly compared to the workmanship of the hilt. Your observations about the weight reinforce the visual evidence.
For comparison, a similar hilt with appropriately sized blade, total weight .83 kg.:

30th May 2012, 10:00 AM	#2
Timo Nieminen Member Join Date: Mar 2012 Posts: 422	Here is another. A bit shabby, with a big bend in the blade at about 20", about 10-15 degrees. Perhaps I can straighten it, if I feel the need. My first impression was that it would be a bit of a pig to try to fight with, a rather heavy and unwieldy brute ("only" 1.36kg, but still a pig). Maybe OK for dealing with unmoving sacrifical targets. Attached Images

30th May 2012, 03:23 PM	#3
Berkley Member Join Date: Mar 2005 Location: Austin, Texas USA Posts: 257	I believe the blade is not original to the hilt. The blade is considerably wider than the bolster, and its design seems ungainly compared to the workmanship of the hilt. Your observations about the weight reinforce the visual evidence. For comparison, a similar hilt with appropriately sized blade, total weight .83 kg.: Attached Images

23rd April 2012, 11:12 PM	#1
spiral Member Join Date: Dec 2004 Posts: 1,712	Hi Timo, well distal taper is always good in a blade, Helps stop it snapping under duress, after all. They should be differntialy hardend if for use but the very tips are likely to be left soft judging from kukri, {Ive never etched a kora/khonra etc.} if you can lightly etch it you will see whether the man who made it , made for it to be potentialy used or purely a wallhanger.Post ww2 does seem likely, I agree. Who it was made for, as with many ethnographic weapons from that area we will probably never know. Beheading buffalo is there main job today if made for locals. Spiral