Inlay, koftgari, repousse, chasing and neillo

Mare Rosu · 18th December 2004, 08:52 PM

Yannis
Thanks for the suggestion to share our good stuff for review!

Battara
I was going to make an attempt to say just what type the inscription was, after studying you information, but chickened out! Would you please tell me what type the inscription on the blade is and maybe even the hilt and sheath in the back ground.
Thanks

Battara · 19th December 2004, 09:15 PM

Yannis

My apologies.

I think I was seeing an optical illusion (or a senor moment

). From this other computer screen, I can now see that in fact it is chased. You're right in that chased is exclusively from the top down onto the metal.

Mare Rosu

Your inscription appears to possibly be a bismallah ("name of God") and done in gold koftgari with some line engraving around the borders of the bismallah. You can even see a little of the koftgari wearing at the edges. Overall, excellent condition of koftgari.

The scabbard in the background is difficult to see. If you could post clearer pictures, that would be helpful.

I would take a stab at a possible mixture of soldering of silver pieces and silver stylized wire with perhaps some chasing, though again, I would need clearer details.

The hilt section in the foreground appears to be repoussed, although I have seen and done some chasing work that, if done the right way, can appear to be repoussed like this silver scabbard section that I chased years ago (my second attempt at a scabbard):

Battara · 19th December 2004, 09:23 PM

As you can see, one can be fooled because the metal is pushed back in parts allowing only the none hammered parts to remain looking like they are pushed out. It can become very confusing at times.

Another note: to repousse something one needs to use thinner sheet metal. Chasing, on the other hand, can be used on almost any thickness.

Rick · 19th December 2004, 09:25 PM

What kind of wood Jose ?

I really like the design on the band also !

Mare Rosu · 19th December 2004, 09:56 PM

Battara;
Scabbard for your inspection/opinion.
Thanks for your help!

Yannis · 19th December 2004, 09:57 PM

Battara,

No need for apologies. I have seen the same illusion myself, in photos and in reality under certain light

Maybe because of the contrast with niello.

Someone told me that niello over flat silver may peel away, that's why it is more common the combination with chasing. Is this true?

In this particular scabbard niello is on flat silver and it looks high polished. The chassing in the middle is plain silver.

Yannis · 19th December 2004, 10:00 PM

Mare Rosu

Excellent work! I guess persian wootz blade with ottoman fittings

Battara · 19th December 2004, 10:11 PM

Rick

The wood is burled walnut on top. Thank you. I extrapolated the design from the kris hilt patterns in the kris shown as my avatar. I tried to match the theme done in swassa on the hilt:

18th December 2004, 08:52 PM	#1
Mare Rosu Deceased Join Date: Dec 2004 Location: USA, DEEP SOUTH, GEORGIA, Y'all hear? Posts: 121	Help Yannis Thanks for the suggestion to share our good stuff for review! Battara I was going to make an attempt to say just what type the inscription was, after studying you information, but chickened out! Would you please tell me what type the inscription on the blade is and maybe even the hilt and sheath in the back ground. Thanks Attached Images

19th December 2004, 09:15 PM	#2
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,345	Yannis My apologies. I think I was seeing an optical illusion (or a senor moment ). From this other computer screen, I can now see that in fact it is chased. You're right in that chased is exclusively from the top down onto the metal. Mare Rosu Your inscription appears to possibly be a bismallah ("name of God") and done in gold koftgari with some line engraving around the borders of the bismallah. You can even see a little of the koftgari wearing at the edges. Overall, excellent condition of koftgari. The scabbard in the background is difficult to see. If you could post clearer pictures, that would be helpful. I would take a stab at a possible mixture of soldering of silver pieces and silver stylized wire with perhaps some chasing, though again, I would need clearer details. The hilt section in the foreground appears to be repoussed, although I have seen and done some chasing work that, if done the right way, can appear to be repoussed like this silver scabbard section that I chased years ago (my second attempt at a scabbard): Attached Images Last edited by Battara; 19th December 2004 at 09:25 PM.

19th December 2004, 09:25 PM	#4
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,376	Nice Burl What kind of wood Jose ? I really like the design on the band also !

19th December 2004, 09:56 PM	#5
Mare Rosu Deceased Join Date: Dec 2004 Location: USA, DEEP SOUTH, GEORGIA, Y'all hear? Posts: 121	SCABBARD Battara; Scabbard for your inspection/opinion. Thanks for your help! Attached Images

19th December 2004, 09:57 PM	#6
Yannis Member Join Date: Dec 2004 Location: Athens Greece Posts: 479	Illusion Battara, No need for apologies. I have seen the same illusion myself, in photos and in reality under certain light Maybe because of the contrast with niello. Someone told me that niello over flat silver may peel away, that's why it is more common the combination with chasing. Is this true? In this particular scabbard niello is on flat silver and it looks high polished. The chassing in the middle is plain silver.

19th December 2004, 09:23 PM	#3
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,345	As you can see, one can be fooled because the metal is pushed back in parts allowing only the none hammered parts to remain looking like they are pushed out. It can become very confusing at times. Another note: to repousse something one needs to use thinner sheet metal. Chasing, on the other hand, can be used on almost any thickness.

19th December 2004, 10:00 PM	#7
Yannis Member Join Date: Dec 2004 Location: Athens Greece Posts: 479	Mare Rosu Excellent work! I guess persian wootz blade with ottoman fittings

19th December 2004, 10:11 PM	#8
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,345	Rick The wood is burled walnut on top. Thank you. I extrapolated the design from the kris hilt patterns in the kris shown as my avatar. I tried to match the theme done in swassa on the hilt: Attached Images