Kaskara Fuller Styles and Some Blade Marks--a third essay for discussion

Edster · 7th September 2018, 04:10 PM

Kubur,

Good question. I couldn't find a reference to El Kar blades of marked European origin. As in the quote, the Kassala informant said he used Ethiopian styles as a reference. I didn't ask if he thought those blades were native Ethiopian or based on a European or other foreign origin model. Italy was active in Ethiopia for several years during the 19th and 20th Centuries so they could have been an influence. Also, Ethiopia also had a native blade tradition as well. The database seems too small just now to hazard a good educated guess.

A well inscribed El Kar was presented by CharlesS in a 2008 post linked below. A good discussion led by Jim ensued. The blade was not dated or identified, but the sword had a Sennariya cross-guard and the Bega tassel indicative of Eastern Sudan. Also, the inscriptions (images and text) could indicate plus or minus Mahdiya era. I hadn't thought about it before, but the El Kar fuller could have been added to either a native or imported blade as fuller making and surface polishing processes would obliterate any maker's mark regardless of origin.

http://vikingsword.com/vb/showthread.php?t=7668

Best,
Ed

Kubur · 8th September 2018, 08:40 AM

Thank you Ed it's very informative.
About Charles sword I think the blade is local.
To me the most important is not to be local or imported but a blade that was used (and sharpened).

Edster · 10th September 2018, 02:57 PM

The images attached are of the Suliman Makhummas kaskara collected by the 4th Irish Dragoon Guards in 1882 as referenced in the RDGAC text linked above. They were provided recently for use by permission of the York Army Museum who requested notice of images copyright by the Museum.

This before 1882 sword is significant as it is at least a generation before the c.1914 Makhummas the example in Fig. 14 above. Also the quillon is similar to the 1914 example. There appears to be a blade reinforcing piece under the langet.

Special thanks to Aline Staes, Collections Manager, York Army Museum.

Ed

Ian · 10th September 2018, 10:37 PM

Hi Ed.
I wonder if the added piece under the langet may be a repair. Perhaps a broken tang. I’ve seen similar additions on Moro swords for repairing damaged tangs.
Ian

Quote:

Originally Posted by Edster

The images attached are of the Suliman Makhummas kaskara collected by the 4th Irish Dragoon Guards in 1882 as referenced in the RDGAC text linked above. They were provided recently for use by permission of the York Army Museum who requested notice of images copyright by the Museum.

This before 1882 sword is significant as it is at least a generation before the c.1914 Makhummas the example in Fig. 14 above. Also the quillon is similar to the 1914 example. There appears to be a blade reinforcing piece under the langet.

Special thanks to Aline Staes, Collections Manager, York Army Museum.

Ed

Edster · 11th September 2018, 03:22 AM

Ian,

Yes, that was my thought as well. I have requested an oblique pic of that section and further assessment. A repair would be testimony to the common breakage of native blades during the Mahdiya period.

Ed

Kubur · 11th September 2018, 09:09 AM

Broken or sometimes just too short

I've seen the same on Persian dagger tangs, two pieces of metal to hold firmly the blade.

Is it the same with the tabouka, you've sometimes two pieces of metal at the forte with rivets?

Edster · 11th September 2018, 01:47 PM

Kubur, you could well be correct. RDGAC's assessment of the tabs on sword #3 are:

Quote: "At said base are a pair of large tabs, seemingly forge-welded or similar to the flats of the blade, and presumably intended to broaden it a little and allow the cross-guard and grip a firmer attachment to the base and tang, though that's probably an erroneous presumption."

Regards,
Ed

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

7th September 2018, 04:10 PM	#1
Edster Member Join Date: Oct 2010 Posts: 411	Kubur, Good question. I couldn't find a reference to El Kar blades of marked European origin. As in the quote, the Kassala informant said he used Ethiopian styles as a reference. I didn't ask if he thought those blades were native Ethiopian or based on a European or other foreign origin model. Italy was active in Ethiopia for several years during the 19th and 20th Centuries so they could have been an influence. Also, Ethiopia also had a native blade tradition as well. The database seems too small just now to hazard a good educated guess. A well inscribed El Kar was presented by CharlesS in a 2008 post linked below. A good discussion led by Jim ensued. The blade was not dated or identified, but the sword had a Sennariya cross-guard and the Bega tassel indicative of Eastern Sudan. Also, the inscriptions (images and text) could indicate plus or minus Mahdiya era. I hadn't thought about it before, but the El Kar fuller could have been added to either a native or imported blade as fuller making and surface polishing processes would obliterate any maker's mark regardless of origin. http://vikingsword.com/vb/showthread.php?t=7668 Best, Ed

8th September 2018, 08:40 AM	#2
Kubur Member Join Date: Jun 2013 Posts: 2,145	Thank you Ed it's very informative. About Charles sword I think the blade is local. To me the most important is not to be local or imported but a blade that was used (and sharpened).

10th September 2018, 02:57 PM	#3
Edster Member Join Date: Oct 2010 Posts: 411	1882 Suliman Makhummas The images attached are of the Suliman Makhummas kaskara collected by the 4th Irish Dragoon Guards in 1882 as referenced in the RDGAC text linked above. They were provided recently for use by permission of the York Army Museum who requested notice of images copyright by the Museum. This before 1882 sword is significant as it is at least a generation before the c.1914 Makhummas the example in Fig. 14 above. Also the quillon is similar to the 1914 example. There appears to be a blade reinforcing piece under the langet. Special thanks to Aline Staes, Collections Manager, York Army Museum. Ed Attached Images Last edited by Edster; 10th September 2018 at 03:17 PM. Reason: Delete this post. Another one with attached images to follow.

11th September 2018, 03:22 AM	#5
Edster Member Join Date: Oct 2010 Posts: 411	Ian, Yes, that was my thought as well. I have requested an oblique pic of that section and further assessment. A repair would be testimony to the common breakage of native blades during the Mahdiya period. Ed

11th September 2018, 09:09 AM	#6
Kubur Member Join Date: Jun 2013 Posts: 2,145	Broken or sometimes just too short I've seen the same on Persian dagger tangs, two pieces of metal to hold firmly the blade. Is it the same with the tabouka, you've sometimes two pieces of metal at the forte with rivets?

11th September 2018, 01:47 PM	#7
Edster Member Join Date: Oct 2010 Posts: 411	Kubur, you could well be correct. RDGAC's assessment of the tabs on sword #3 are: Quote: "At said base are a pair of large tabs, seemingly forge-welded or similar to the flats of the blade, and presumably intended to broaden it a little and allow the cross-guard and grip a firmer attachment to the base and tang, though that's probably an erroneous presumption." Regards, Ed