View Single Post
Old 9th July 2021, 08:38 AM   #17
mariusgmioc
Member
 
mariusgmioc's Avatar
 
Join Date: Sep 2014
Location: Netherlands
Posts: 1,749
Default

Thank you Mahratt for these better pictures!

You raise an interesting issue.

The corrosion on the blade appears to be genuine to my eyes.

However, I find it very strange that it is so evenly spread across the whole blade. From my experience, the blades oxidize unevenly, with those parts that are inside the metallic armatures of the scabbard oxidizing much more than the rest, because that's where most of the micro-condensation takes place. Usually, most of the oxidation is at the tip of the blade, on the part that is inside the chape.

I also find strange the level of oxidation and the aspect of it on the scabbard. I have many pieces with koftgari, in various conditions but usually the oxidation is not so uniform and doesn't have this brownish aspect.

Last but not least, for most scabbards, the parts that get damaged first are those covered in textile or leather, while the metallic armatures tend to remain in better condition. Here I see the opposite: the metallic armatures are in poor, corroded condition, while the mid-section leather part is in significantly better condition. If the metallic parts were exposed to such harsh conditions to get so heavily corroded, then I would expect the leather to show some matching degradation and be in much worse condition.

So, while I cannot express a definitive conclusion, I believe there are some points that may raise some suspicion.

As a fellow member would say: "my antennae are twitching."
mariusgmioc is offline   Reply With Quote