Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Ethnographic Weapons
User Name
Password
FAQ Members List Calendar Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
Old 14th January 2018, 06:31 PM   #1
chiefheadknocker
Member
 
Join Date: Dec 2014
Posts: 48
Default old japanese short sword for id please

This is a Japanese sword dagger which I recently acquired , the blade is 13 inches long , I'm looking for any info possible age etc , I'm no expert in this area but I can see it has some age ,
thanks
Attached Images
      

Last edited by chiefheadknocker : 14th January 2018 at 08:41 PM.
chiefheadknocker is offline   Reply With Quote
Old 14th January 2018, 07:23 PM   #2
Rich
Member
 
Rich's Avatar
 
Join Date: Dec 2004
Location: comfortably at home
Posts: 380
Default

This is a ko-wakizashi (small wakizashi) or o-tanto (large tanto) - your choice. Normally tanto are under 12 inches and waks are 12-24 inches but many are borderline (like yours). It is mumei (unsigned) and has been remounted at least once (has two mekugi-ana) tang holes. The fuchi/kashira (collar and end cap) are in a kabuto motif (Japanese helmet). Condition is not good, so can't tell anything about the hada (steel grain) or hamon (temperline). It would take a good Japanese sword polisher to restore the blade. For the time being I'd suggest just apply a very thin coat of oil to be the blade (not enough to make droplets - don't want oil running into the saya (scabbard). Wish I could tell you more, but that's all I can see in it's current state.

Rich

Japanese Sword Guide
http://www.japaneseswordindex.com/nihonto.htm
Rich is offline   Reply With Quote
Old 14th January 2018, 08:14 PM   #3
mariusgmioc
Member
 
mariusgmioc's Avatar
 
Join Date: Sep 2014
Location: Netherlands
Posts: 1,030
Default

Can you please post better photos of the both sides of the tang? Can you discern any Chinese characters on the tang? Also photos of the tip of the blade would be useful.

You may also want to address this question on the Nihonto Message Board forum.

http://www.militaria.co.za/nmb/index.php
mariusgmioc is offline   Reply With Quote
Old 15th January 2018, 06:41 PM   #4
chiefheadknocker
Member
 
Join Date: Dec 2014
Posts: 48
Default

Quote:
Originally Posted by mariusgmioc
Can you please post better photos of the both sides of the tang? Can you discern any Chinese characters on the tang? Also photos of the tip of the blade would be useful.

You may also want to address this question on the Nihonto Message Board forum.

http://www.militaria.co.za/nmb/index.php

hi there , I have just uploaded a couple of pics , there is no sign of any Chinese characters and the tang looks like it has lots of age ,
thanks
Attached Images
  
chiefheadknocker is offline   Reply With Quote
Old 15th January 2018, 06:44 PM   #5
chiefheadknocker
Member
 
Join Date: Dec 2014
Posts: 48
Default

Quote:
Originally Posted by Rich
This is a ko-wakizashi (small wakizashi) or o-tanto (large tanto) - your choice. Normally tanto are under 12 inches and waks are 12-24 inches but many are borderline (like yours). It is mumei (unsigned) and has been remounted at least once (has two mekugi-ana) tang holes. The fuchi/kashira (collar and end cap) are in a kabuto motif (Japanese helmet). Condition is not good, so can't tell anything about the hada (steel grain) or hamon (temperline). It would take a good Japanese sword polisher to restore the blade. For the time being I'd suggest just apply a very thin coat of oil to be the blade (not enough to make droplets - don't want oil running into the saya (scabbard). Wish I could tell you more, but that's all I can see in it's current state.

Rich

Japanese Sword Guide
http://www.japaneseswordindex.com/nihonto.htm

hi rich thanks for your reply and advice , I don't expect its worth the expense of having it polished , but when looked in the right light you can see a tight wavy hamon line , I expect it would look very nice polished ,
regards,matthew
chiefheadknocker is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT. The time now is 07:14 AM.


Powered by: vBulletin Version 3.0.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.