Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Ethnographic Weapons

Reply
 
Thread Tools Search this Thread Display Modes
Old 31st October 2018, 11:47 AM   #1
chiefheadknocker
Member
 
Join Date: Dec 2014
Posts: 143
Default A Moro Kris With Restoration Questions

This is another moro Kris which ive recently bought , as you can see it need some tlc , the hilt has moved up the tang at some point making the gangya/guard loose and now has fixed itself in this position I expect the tang has rusted and is holding the hilt here , any ideas on how to loosen this and get it back into its right place , also as you can see there has been a rectangle hole made in the pommel ,was this for inlay of some type?
I would also like to rebind the hilt but im unsure what type of binding material to use , I think it will be a very handsome sword when finished .
Thanks for any help you can give
Attached Images
    
chiefheadknocker is offline   Reply With Quote
Old 1st November 2018, 09:19 AM   #2
chiefheadknocker
Member
 
Join Date: Dec 2014
Posts: 143
Default

I have eventually managed to release the hilt with penetrating oil and lots of patience , the tang was very rusted , after disassembling the hilt I gave everything a good clean and fixed it all back together with the help of some epoxy resin to hold the hilt tight , the result I think is very good , I bound the hilt the best I could with what I had , just thought I would show how it came out .
Attached Images
    

Last edited by chiefheadknocker; 1st November 2018 at 11:05 AM.
chiefheadknocker is offline   Reply With Quote
Old 1st November 2018, 11:03 PM   #3
Battara
EAAF Staff
 
Battara's Avatar
 
Join Date: Dec 2004
Location: Louisville, KY
Posts: 7,212
Default

Nice restoration work!
Battara is offline   Reply With Quote
Old 3rd November 2018, 03:53 PM   #4
Sajen
Member
 
Sajen's Avatar
 
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,748
Default

Good work CHK, congrats! I would have tried to keep the both remaining braided fiber rings and just blacken them again. But like said, good result.

Regards,
Detlef
Sajen is offline   Reply With Quote
Old 3rd November 2018, 04:24 PM   #5
kino
Member
 
kino's Avatar
 
Join Date: Dec 2004
Posts: 1,001
Default

You work fast, cleaning and restoring Chief. I will have to agree with Sajen on keeping the original braided rings. Nice work.

I’m speculating that the rectangular cavity in the pommel was once inlaid with the same type of wood. Instead of having to start over and re-carving, it was just filled in.

See the repair work on this Kampilan hilt. Same repair work possibly.
Attached Images
 
kino is offline   Reply With Quote
Old 3rd November 2018, 09:55 PM   #6
Ian
Vikingsword Staff
 
Ian's Avatar
 
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,181
Default

Hi Chief,

Nice restoration and cleaning. I agree that keeping the braided rings would have been more in keeping how it looked in the original culture, but the whipped black cord looks very neat. Having an original anting anting is a nice touch too.

Kino's suggestion about a prior repair to the pommel sounds right to me. I've seen similar repairs on a barung hilt as well. The quality of the repair on kino's kampilan looks particularly good to me and might have been done by the original carver of that hilt.

Ian

Last edited by Ian; 3rd November 2018 at 10:14 PM.
Ian is offline   Reply With Quote
Old 4th November 2018, 08:34 AM   #7
chiefheadknocker
Member
 
Join Date: Dec 2014
Posts: 143
Default

I have really enjoyed restoring this sword ,which I dedicated a whole day to get it done , I was in two minds about the brading , there was only one section that was intact and so I left it off as it wouldn't match the new ones , I lightly etched the blade which came up very nice , I prefer not to clean these sword up too much as they can loose there aged look but this one had to be put right ,I couldn't live with the loose hilt , now it looks quite impressive with the bright silver bands against the black braiding , I dont think I will try to tackle putting a wooden inlay into the pommel !
Thanks for all your responses
chiefheadknocker is offline   Reply With Quote
Old 6th August 2024, 03:46 PM   #8
Tim Simmons
Member
 
Tim Simmons's Avatar
 
Join Date: Dec 2004
Location: What is still UK
Posts: 5,797
Default

I am in the process of purchasing this Kris here in the UK. What I would like to know, what would have originally been inlayed into the pommel? To my eyes the hole was cut at the time of making the pommel, just does not look natural. This is a well travelled kris.
Attached Images
 
Tim Simmons is offline   Reply With Quote
Old 6th August 2024, 04:29 PM   #9
Sajen
Member
 
Sajen's Avatar
 
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,748
Default

Like stated in up, the same type of wood as the pommel.

Regards,
Detlef
Sajen is offline   Reply With Quote
Old 6th August 2024, 04:53 PM   #10
Tim Simmons
Member
 
Tim Simmons's Avatar
 
Join Date: Dec 2004
Location: What is still UK
Posts: 5,797
Default

Clearly been cut at the time of making. Why cut a hole to fill with the same wood? I have ivory and mop, also human teeth but that is a Fijian thing.
Attached Images
 
Tim Simmons is offline   Reply With Quote
Old 6th August 2024, 06:26 PM   #11
Tim Simmons
Member
 
Tim Simmons's Avatar
 
Join Date: Dec 2004
Location: What is still UK
Posts: 5,797
Default

conch?
Tim Simmons is offline   Reply With Quote
Old 6th August 2024, 08:10 PM   #12
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,109
Default

Could have been ivory or MOP. At this point we will never know for sure, so if you choose to fill it with some material i would say it is dealer's choice.
David is offline   Reply With Quote
Old 7th August 2024, 09:21 AM   #13
Tim Simmons
Member
 
Tim Simmons's Avatar
 
Join Date: Dec 2004
Location: What is still UK
Posts: 5,797
Default

I am trying to find a material that may have been inlayed to the pommel. If there is anybody with knowledge of magical amulets relating to the list below would be very helpful.

Kabal (or kunat) - agimat that supposedly make the skin invulnerable to cuts and sword slashes.[14]
Pamako - agimat or orasyon (magical prayer) that supposedly nail down entities to keep them from moving[15]
Tagabulag - agimat that supposedly turns the wearer invisible against their enemy[14] or blind them[15]
Tagaliwas - agimat that can supposedly deflect bullets[15]

What is going on here, English translation would be very informative.

https://fb.watch/tOXevo9wl1/

Last edited by Tim Simmons; 7th August 2024 at 09:43 AM.
Tim Simmons is offline   Reply With Quote
Old 7th August 2024, 01:55 PM   #14
Sajen
Member
 
Sajen's Avatar
 
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,748
Default

Quote:
Originally Posted by Tim Simmons View Post
Clearly been cut at the time of making. Why cut a hole to fill with the same wood? I have ivory and mop, also human teeth but that is a Fijian thing.
Hi Tim,

I don't think that there was any other material inlaid than wood, it could be that there was a knothole so the maker inlayed the same type of wood.

This place would be very unusual for an amulette.

Regards,
Detlef
Sajen is offline   Reply With Quote
Old 7th August 2024, 03:05 PM   #15
Tim Simmons
Member
 
Tim Simmons's Avatar
 
Join Date: Dec 2004
Location: What is still UK
Posts: 5,797
Default

I should stick to what I know . There is no going back know.
Tim Simmons is offline   Reply With Quote
Old 7th August 2024, 04:59 PM   #16
Sajen
Member
 
Sajen's Avatar
 
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,748
Default

Quote:
Originally Posted by Tim Simmons View Post
I am trying to find a material that may have been inlayed to the pommel. If there is anybody with knowledge of magical amulets relating to the list below would be very helpful.

Kabal (or kunat) - agimat that supposedly make the skin invulnerable to cuts and sword slashes.[14]
Pamako - agimat or orasyon (magical prayer) that supposedly nail down entities to keep them from moving[15]
Tagabulag - agimat that supposedly turns the wearer invisible against their enemy[14] or blind them[15]
Tagaliwas - agimat that can supposedly deflect bullets[15]

What is going on here, English translation would be very informative.

https://fb.watch/tOXevo9wl1/
Pamako could mean nail when the language is Tagalog, but I doubt it's Tagalog language.
Sorry, I still strongly doubt that there was an amulet inlay, I have seen several inlays in Moro wooden pommels like shown in up.
Amulets (anting anting) are most of the time coins or fabric. Do a little bit search at this place and you will find several examples.
Here is a restoration with MOP but I guess that there was once a coin.
Regards,
Detlef
Attached Images
 
Sajen is offline   Reply With Quote
Old 7th August 2024, 05:08 PM   #17
Sajen
Member
 
Sajen's Avatar
 
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,748
Default

Quote:
Originally Posted by Tim Simmons View Post
I should stick to what I know .
That's exactly the problem, we just don't know and only can guess!
I think Chiefheadknocker had once made the correct decision to let it like it is!
Sajen is offline   Reply With Quote
Old 7th August 2024, 09:06 PM   #18
Rick
Vikingsword Staff
 
Rick's Avatar
 
Join Date: Nov 2004
Posts: 6,288
Default

Quote:
Originally Posted by Sajen View Post
Hi Tim,

I don't think that there was any other material inlaid than wood, it could be that there was a knothole so the maker inlayed the same type of wood.

This place would be very unusual for an amulette.

Regards,
Detlef
Agree with Detlef. These woods have very contorted grain patterns and can often have voids or checks in the material. I expect these inlays are for this purpose.
Imagine putting all the work into shaping a beautifully grained pommel and coming across a void. Throw out your work or patch it with a matching piece.
I doubt these are talismanic at all.
Rick is offline   Reply With Quote
Old 8th August 2024, 01:36 AM   #19
kai
Member
 
Join Date: Apr 2005
Posts: 3,253
Default

Hello Tim,

I'm with Detlef, Albert, and Rick - most certainly this was an inset wooden patch to repair any defect in the material. This is not unusual with Moro burlwood hilts, especially larger ones (cp. Albert's example).

An inlay from the same piece of wood will have blended in well. The position would not lend itself for any contrasting inset - just looks bad. As an alternative to keep it as is, you could try filling it with a resin paste with wood dust and matching color (or as last resort go for a blackish resin patch).

Regards,
Kai
kai is offline   Reply With Quote
Old 14th August 2024, 10:40 AM   #20
Tim Simmons
Member
 
Tim Simmons's Avatar
 
Join Date: Dec 2004
Location: What is still UK
Posts: 5,797
Default one last comment

I am not familiar with these weapons. I was surprised how heavy the blade is on this piece. I had a straight bladed version possibly of similar age, I think the blade was quite a bit lighter in weight. I sold it to Detlef he might still have it. When in your hand the cut rectangle does not stand out and jar the eye. All I have done is to colour the chipped area so it does not, hit your like a big pizza pie
Attached Images
 
Tim Simmons is offline   Reply With Quote
Old 14th August 2024, 06:45 PM   #21
Sajen
Member
 
Sajen's Avatar
 
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,748
Default

Quote:
Originally Posted by Tim Simmons View Post
I had a straight bladed version possibly of similar age, I think the blade was quite a bit lighter in weight. I sold it to Detlef he might still have it.
Jep, Tim, I still have it in my collection.
Attached Images
 
Sajen is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 04:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.