|
24th April 2024, 07:27 PM | #1 |
Member
Join Date: Apr 2017
Location: Sweden
Posts: 682
|
|
25th April 2024, 05:47 PM | #2 |
Member
Join Date: Dec 2019
Location: Eastern Sierra
Posts: 392
|
At 2 lb, a kilo, I do not believe it is a cobblers hammer, but some sort of machinist/smiths hammer would make sense to me.
|
25th April 2024, 07:44 PM | #3 |
Member
Join Date: Apr 2017
Location: Sweden
Posts: 682
|
If necessary it would obviously make a ferocious weapon. I think we suggested in earlier discussions that the presence of langets might make objects more likely weapons of some sort.
|
26th April 2024, 10:42 AM | #4 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,649
|
Given that, as it goes, this is not an intended weapon, let us move this thread to the Miscellania Forum ... and see what further comments show up.
|
28th April 2024, 06:56 PM | #5 |
Member
Join Date: Jun 2013
Posts: 1,187
|
Maybe an antique slater's hammer?
|
29th April 2024, 01:01 AM | #6 |
Member
Join Date: May 2006
Posts: 6,736
|
This hammer looks pretty similar to a hammer owned by a fencer I used to know. He had it made by the local smith --- this was 1950's, when we still had smiths in country towns.
He put up rural fencing, the spike end was used like a carpenters center punch, ie, to provide a location hole for a nail to be driven or drilled. The fencer put up rural fencing using Australian hardwood bush timber, he was driving relatively large steel spikes. |
29th April 2024, 10:37 AM | #7 |
Member
Join Date: Jan 2013
Location: Scotland
Posts: 322
|
I had a look through Salaman's woodworking tools and there are pages and pages of different hammers!
A bit like axes there are not many uses for a spike on the reverse of a hammer - mining perhaps and weapons of course. However, there is a fairly close match to a Ship Maul used by shipwrights to hammer in the trenails (wooden pins) and large nails during shipbuilding. The tool would then be reversed and the spike used to hammer the pins/nails below the surface of the wood to allow trimming to shape afterwards. They came in many sizes between 1 1/2 to 8 lbs with handles up to 2' 9". |
|
|