Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Ethnographic Miscellania

Reply
 
Thread Tools Search this Thread Display Modes
Old 8th June 2014, 06:17 PM   #1
fernando
Lead Moderator European Armoury
 
fernando's Avatar
 
Join Date: Dec 2004
Location: Portugal
Posts: 9,620
Default Another chalenge

I don't think there will be a winner on this one ... but let me try . .
This ethno device is not a weapon, but it surely has a martial look, with its 1,650 Kgs. and 46 cms. length ... and capable to drill a 7 cms. hole.
But for drilling what ? I was told this is a tool associated with well sweep making; like for drilling a hole in the pole, i don't know
In any case the blacksmith has to be a rather skilled artisan, to make such an object to be effective.
Any ideas ?
Attached Images
     
fernando is online now   Reply With Quote
Old 8th June 2014, 11:32 PM   #2
Hotspur
Member
 
Hotspur's Avatar
 
Join Date: Jul 2009
Location: Nipmuc USA
Posts: 481
Default

Timber augers came in a lot of sizes. Post&beam framing, shipbuilding; two more possibilities for needing a hole that size.

Aside from the one spiral auger here, scroll down for the picture of boat building tools (on a smaller scale).
http://www.gutenberg.org/files/16277...mages/069s.jpg
http://www.gutenberg.org/files/16277...he_boatbuilder

Cheers

GC
Hotspur is offline   Reply With Quote
Old 9th June 2014, 05:43 PM   #3
fernando
Lead Moderator European Armoury
 
fernando's Avatar
 
Join Date: Dec 2004
Location: Portugal
Posts: 9,620
Default

Thank you so much for the links, Glen,
I knew these 'classic' augers; there are a couple wooden shipyards around.
What i didn't know was the term auger which, in return, i tell you how we call them in portuguese: trados. I dare say that those augers are not only used in boat building but also on a multipurpose basis, civil carpentry, cooperage, etc. ... still in use nowadays, although produced by specialized machinery.
What i find atypical in my example is that, instead of having that spiral screw continuity, only has one single hélix blade, so wide as 70 milimeters, as if the material it has to drill is rather soft and so easy to penetrate.
I would venture this is definitely a tool for a very specific job.
Surely a primitive tool, i would say from the 19th century.

Last edited by fernando; 9th June 2014 at 06:28 PM.
fernando is online now   Reply With Quote
Old 9th June 2014, 06:53 PM   #4
Hotspur
Member
 
Hotspur's Avatar
 
Join Date: Jul 2009
Location: Nipmuc USA
Posts: 481
Default

The spoon type with a lead screw, as the one you show, was often used in large mortise and tenon work. The auger removing a lot of the pocket and then chisels to square the mortise. The T handle and other pointy blade next to that in the linked picture are of your type.

Smaller modern mortising drills have a twist drill within a square tube acting as a four sided chisel. Large scale post&beam work is still often done the old way with a spoon auger. With wooden boat building, the round pocket in the beam, with pegs holding the planks.

Cheers

GC
Hotspur is offline   Reply With Quote
Old 9th June 2014, 07:44 PM   #5
fernando
Lead Moderator European Armoury
 
fernando's Avatar
 
Join Date: Dec 2004
Location: Portugal
Posts: 9,620
Default

Alright, duly noted ... and much obliged.
One of these days i will have a look in next town Naval Construction Museum (3 miles distant), to check whether they have this type of tool.
fernando is online now   Reply With Quote
Old 15th June 2014, 03:34 PM   #6
fernando
Lead Moderator European Armoury
 
fernando's Avatar
 
Join Date: Dec 2004
Location: Portugal
Posts: 9,620
Default

Someone came around and finally the mistery is solved.
Let me try and explain ...
Imagine a sort of chain, praying rosary style, with its beads. Then consider breaking the rosary, introducing it in a tube, where the beads fit precisely its interior diameter. After that, you introduce the tube in a water container and start rotating the rosary in the sense that the beads go up the tube. The result will be that the water is transported to the top, in quantities retained inside the beads interval.
That is the principle of water pumping in which this auger is used; for drilling a hole through a pine trunk where the beads (cork plugs) elevate the water, tractioned by some crank & handle resource.
No wonder this pumping system is called rosario (rosary) or de contas (beads).

.
Attached Images
  
fernando is online now   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.