|
|
|||||||
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
14th December 2008, 04:21 PM
|
#1 |
|
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
A fine Styrian snap tinderlock gun, ca. 1525, in the Graz Armory
Made by Peter Hofkircher who had his workshop at the nearby town of Mürzzuschlag.
It features a part lock plate chararcertistic of the 1520s-30 though complete lock plates were widely in use by then. The stock is of either limewood or pearwood. Though having a recoil stop (hook) both its relatively small caliber of 15.7 mm and relatively light weight of 8.7 kilograms denote that is not really a wall gun but rather a long harquebus with a support hook. The overall length of the piece is 179 cm. Enjoy. Michael |
|
|
|
14th December 2008, 04:28 PM
|
#2 |
|
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
The rest.
The ramrod channel is offset because of the hook. Note the long muzzle section left characteristically unstocked. Michael |
|
|
|
|
14th December 2008, 04:31 PM
|
#3 |
|
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
The pic of the broad fish tail buttstock should not have been in there; instead, these should have.
Michael |
|
|
|
|
14th December 2008, 04:34 PM
|
#4 |
|
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
Hopefully I will get to right pic this time ...
|
|
|
|
|
14th December 2008, 04:36 PM
|
#5 |
|
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
Nooo ...
|
|
|
|
|
14th December 2008, 04:36 PM
|
#6 |
|
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
Done at last ...
|
|
|
|
|
|
|
Hybrid Mode
