Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Ethnographic Weapons
FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
Old 18th December 2015, 03:08 PM   #1
colin henshaw
Member
 
Join Date: Jan 2008
Posts: 1,430
Default Unusual knife for I.D. Asian ?

Hi

I've had this strange little knife for years, but could never figure out what its for or where its from. The handle elements are made from dark horn and the blade is very thin.

Can anyone recognise it and identify its purpose and area of origin ?
Perhaps its a razor ?

Thanks in advance.
Attached Images
      
colin henshaw is offline   Reply With Quote
Old 21st December 2015, 11:38 AM   #2
colin henshaw
Member
 
Join Date: Jan 2008
Posts: 1,430
Default

Does anyone recognise this knife ?
colin henshaw is offline   Reply With Quote
Old 21st December 2015, 04:50 PM   #3
Miguel
Member
 
Join Date: Jun 2015
Posts: 584
Default

Quote:
Originally Posted by colin henshaw
Does anyone recognise this knife ?
Hi Collin,
I have searched all the references that I have and also spent some time on the web but I have been unable to come up with anything. There are a number of knives that have similar blades but do not have the same type of handle, the serrated blade guard, if that's what it is? is unusual. Sorry to have been no help and thanks for sharing a most unusual little knife.
Regards
Miguel
Miguel is offline   Reply With Quote
Old 22nd December 2015, 04:37 AM   #4
VANDOO
(deceased)
 
Join Date: Dec 2004
Location: OKLAHOMA, USA
Posts: 3,138
Smile

A VERY INTERESTING LITTLE KNIFE NO DOUBT IT IS MADE TO PREFORM SOME SPECIFIC TASK. I WILL GUESS AFRICA AS THE ORIGIN BECAUSE OF THE HORN USED, PERHAPS NORTH AFRICA. GOOD LUCK
VANDOO is offline   Reply With Quote
Old 24th December 2015, 11:11 AM   #5
Tim Simmons
Member
 
Tim Simmons's Avatar
 
Join Date: Dec 2004
Location: What is still UK
Posts: 5,736
Default

This is probably a basket makers knife. I had a similar mystery knife along these lines, long since swapped. I believe the knife is held under arm in the arm pit. Use rather like a static third hand. This makes sense if making fine baskets. Imaging trying to cut fine materials while holding then in place with both hand. I think the projection above the blade my be used to stop the movement of the blade in use at the shoulder. I could be wrong .
Tim Simmons is offline   Reply With Quote
Old 24th December 2015, 12:01 PM   #6
Sajen
Member
 
Sajen's Avatar
 
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,467
Default

Maybe a razor?
Sajen is offline   Reply With Quote
Old 24th December 2015, 10:39 PM   #7
ariel
Member
 
ariel's Avatar
 
Join Date: Dec 2004
Location: Ann Arbor, MI
Posts: 5,503
Default

To shave armpits while weaving baskets? :-)))
ariel is offline   Reply With Quote
Old 25th December 2015, 02:22 AM   #8
Robert
EAAF Staff
 
Robert's Avatar
 
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
Default

Is the blade sharpened on just one side or on both sides?

Best, Robert
Robert is offline   Reply With Quote
Old 27th December 2015, 09:41 AM   #9
colin henshaw
Member
 
Join Date: Jan 2008
Posts: 1,430
Default

The blade is sharp for the entire convex side and for that part of the concave side that extends beyond the hilt projection.

Initially I had considered a razor to be the most likely function, but Tim's suggestion that its for basket-making (splitting the fine cane etc), and held in the armpit, makes a lot of sense. Looking on the internet, I see some basket-making knives have curved blades.

Perhaps the idea of a detachable socket for the hilt, was that the socket would remain under the arm to permit easy removal and return of the knife, should it be required for use in the hand as well as in a static position ??
Attached Images
  
colin henshaw is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.