Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Keris Warung Kopi

Reply
 
Thread Tools Search this Thread Display Modes
Old 17th May 2022, 10:43 PM   #1
Athanase
Member
 
Athanase's Avatar
 
Join Date: Mar 2016
Location: Paris (France)
Posts: 403
Default Kebo keris from Bali

Hello,
Here is one of the Balinese Ke=riss who arrived home a few months ago.
I like his blade with an unusual Dapur and would love to know more about it.

Like half of the Keris I buy in France, the handle is stuck with glue the wrong way round. As I'm in the middle of work and relocation at the moment, I didn't have time to try to fix it.
Attached Images
   
Athanase is offline   Reply With Quote
Old 17th May 2022, 11:54 PM   #2
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,675
Default

Could you please advise blade length?

Thanks.
A. G. Maisey is offline   Reply With Quote
Old 18th May 2022, 09:21 PM   #3
Marcokeris
Member
 
Marcokeris's Avatar
 
Join Date: Aug 2006
Location: Italy
Posts: 928
Default

nice keris @@
Marcokeris is offline   Reply With Quote
Old 18th May 2022, 09:59 PM   #4
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,012
Default

It is obviously quite a bit shorter than the sheath. Are you suspecting this could be a Javanese blade Alan?
David is offline   Reply With Quote
Old 18th May 2022, 10:16 PM   #5
Athanase
Member
 
Athanase's Avatar
 
Join Date: Mar 2016
Location: Paris (France)
Posts: 403
Default

Oh Sorry I forget the length.

the blade length is 36cm.
Athanase is offline   Reply With Quote
Old 19th May 2022, 12:09 AM   #6
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,675
Default

Thank you Athanase.

So, 36cm = +/- 14.25 inches.

After I asked my question I scaled it from your photos and came up with +/- 15"

This keris, blade only, is not of Balinese origin, it was made in Jawa, probably East Jawa, but it has obviously been in Bali for a long time, as the blade finish is what we expect to see on a Balinese keris.

Even without knowing the length, my first impression was that I was looking at a Javanese keris. We seldom meet with Balinese keris that have a Kebo form, and even though the greneng on this keris does show erosion, it seems to be clear that the original style of the rondha was a Javanese rather than a Balinese form.

In fact, many Balinese keris that are regarded as pusaka keris originated in Jawa. I have one such keris, which was a family pusaka, it is quite small, only about 12.5" long, and singo barong, material is classifiable as Majapahit, and the hilt is very old ivory bhuta, the wrongko first half 19th century or earlier.

The wrongko & hilt of your keris look to be at least pre-WWII, but the uwer is a much more recent production, I believe that you will find the "stones" to be plastic.

I would not fiddle too much with this keris, a bit of TLC for the wrongko & hilt, good quality furniture wax or oil, replace the uwer, give the blade a good wash with dishwash detergent and hot water, dry thoroughly, drench with WD40 and allow to dry before painting with fragrant oil, that's it.

The hilt being stuck is a bit of a problem, I'm not going to recommend anything here. There are a number of things that I would try if it were mine, but I cannot transfer my experience to you. The first, obvious thing is the old heat fix, this keris might not have a glued on hilt, rather, it might be rusted on, and if the tang gets broken taking the hilt off it can be a bit of a pain to remedy that situation.

To my way of thinking this is a keris that is a definite keeper.
A. G. Maisey is offline   Reply With Quote
Old 19th May 2022, 03:32 PM   #7
Athanase
Member
 
Athanase's Avatar
 
Join Date: Mar 2016
Location: Paris (France)
Posts: 403
Default

Thank you very much for your answer.
The uwer seems to be made from old glass bead.
I had already put WD40 but I will clean it again according to your instructions.
Athanase is offline   Reply With Quote
Old 19th May 2022, 09:52 PM   #8
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,675
Default

The older ones of this type were glass, but usually I have found these "stones" to be plastic, try testing with a hot needle. There are a lot more plastic ones around than glass.
A. G. Maisey is offline   Reply With Quote
Old 19th May 2022, 10:49 PM   #9
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,012
Default

Quote:
Originally Posted by A. G. Maisey View Post
The older ones of this type were glass, but usually I have found these "stones" to be plastic, try testing with a hot needle. There are a lot more plastic ones around than glass.
You may be right about some of these, but if you look closely at the photo there is at least on actual glass bead (with a hole through it) that has been placed in one of the settings, i assume to replace a missing"stone".
Regardless, if this were mine i would replace the uwer anyway as it's a bit of a mess.
David is offline   Reply With Quote
Old 19th May 2022, 11:51 PM   #10
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,675
Default

Yeah, I didn't notice the bead, & it would be a replacement, but just the same, that uwer needs to go.

Incidentally, a couple weeks back I found out what an "uwer" really is, besides being that little ring under a keris Hilt.

It is the rolled up bit of palm leaf that women --- mostly village women --- use to enlarge the hole in the ear lobe so it can accept a big stud.

Pretty funny I reckon. Like a lot of the names used for keris associated things.
A. G. Maisey is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:03 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.