|
10th October 2017, 03:54 PM
|
#1 |
|
Member
Join Date: Oct 2017
Posts: 27
|
Jerz axe - Musandam Axe- Shihuh tribe?
Dear VikingSword Forum,
thank you for allowing me to register on here. I recently went to an auction and purchased an axe, from the pictures the axe shaft seemed much thicker, however on arrival the axe head was tiny and the shaft wasn't as large as I hoped. I sent images to another member who told me this is a 'jerz axe'. I purchased this for £60, at the bottom of the shaft there is a big crack, i am considering getting an ironworker to steel cap it...around 5 or 6 inches from the bottom so it covers the crack in the wood & also get the top of the axe steel capped. Pictures are attached. regards Last edited by Robert; 11th October 2017 at 03:23 AM. Reason: Do not link to any auction site unless it is to show an example that is not for sale or already sold. |
|
|
|
10th October 2017, 07:17 PM
|
#2 |
|
Member
Join Date: Oct 2017
Posts: 27
|
Apologies I did not realise the images did not get attached, see here please.
|
|
|
|
|
10th October 2017, 07:59 PM
|
#3 |
|
Member
Join Date: Mar 2006
Location: Room 101, Glos. UK
Posts: 4,148
|
there are a few threads here on those, a search on 'jerz' or 'jers' will show it. search for 'mussandam' too.
 mine: http://www.vikingsword.com/vb/showthread.php?t=7420 Last edited by kronckew; 10th October 2017 at 08:10 PM. |
|
|
|
|
10th October 2017, 10:29 PM
|
#4 |
|
Member
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
|
press on this http://www.vikingsword.com/vb/showth...highlight=jerz
|
|
|
|
|
10th October 2017, 11:30 PM
|
#5 |
|
Member
Join Date: Oct 2017
Posts: 27
|
sorry I did not attach the pictures properly.
|
|
|
|
|
11th October 2017, 03:47 AM
|
#6 |
|
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Nice piece shastardhari. Personally I would have someone who is good at repairing wood glue and close the splits in both ends of the haft. They could then reset the original ferrule at the end placing the nail in a different location (drilling a small pilot hole first to reduce stress) to help keep the split from reopening. This way you can keep this piece all original and most likely save a few dollars as well by not having new replacement pieces made. This of course is JMHO.
Best, Robert |
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
