Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Keris Warung Kopi

Reply
 
Thread Tools Search this Thread Display Modes
Old 19th November 2022, 07:47 PM   #1
RobT
Member
 
RobT's Avatar
 
Join Date: Mar 2005
Posts: 445
Default Bali Dress. Bali Blade?

Hi All,

I recently got this Balinese dressed keris but the look of the blade makes me suspect that it’s not from Bali and the blade to sheath fit isn’t really good either. The very slender (about 7/8” [22.22cm] wide) blade is about 14-3/4” (37.5cm) long and has a pronounced ada ada which vanishes into a thickened tip (with chigger bite at the very end). I have taken close-ups of the blade to show the pamor which is the most delicate I have ever seen. Perhaps if the blade were in proper color, the pamor would look bolder? I have also provided side and top views of the ganja area. Hopefully the pictures will be sufficient for a blade ID.
As for the dress, the front of the gandar is a kajoe pelet veneer and the back side had at one time been painted red (which somebody tried very hard to remove). The wranka is also kajoe pelet. I don’t know if the double kendhit on the bondolan hilt is real or a stain. When I got the keris, the hilt was on backwards and there was no uwer. The ensemble is otherwise as found.

Sincerely,
RobT
Attached Images
        
RobT is offline   Reply With Quote
Old 19th November 2022, 08:29 PM   #2
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,012
Default

I would be fairly comfortable believing this blade is from Bali, though i would be more convinced if i could see it in full stain so that the pamor was revealed.
It is not that unusual for a blade to be adapted to a used sarung.
David is offline   Reply With Quote
Old 19th November 2022, 10:52 PM   #3
kai
Member
 
Join Date: Apr 2005
Posts: 3,213
Default

I'm with David and also believe the blade to be proper in a Bali context; also recycling of fittings is not unusual, indeed.

From what I can glean from the pics, also the pamor seems to fit with a Bali origin.

The blade is quite worn and may be older. These often tend to be on the small side of the common size range.

Regards,
Kai
kai is offline   Reply With Quote
Old 19th November 2022, 11:35 PM   #4
drdavid
Member
 
Join Date: Aug 2005
Location: Australia
Posts: 369
Default

Make it 3 votes for Bali
DrDavid
drdavid is offline   Reply With Quote
Old 20th November 2022, 12:01 AM   #5
Anthony G.
Member
 
Join Date: Mar 2018
Posts: 457
Default

Quote:
Originally Posted by drdavid View Post
Make it 3 votes for Bali
DrDavid

It is a nice Balinese keris alright. Not bad, lucky you
Anthony G. is offline   Reply With Quote
Old 20th November 2022, 03:23 AM   #6
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,675
Default

I'm with everybody else.
A. G. Maisey is offline   Reply With Quote
Old 20th November 2022, 01:30 PM   #7
RobT
Member
 
RobT's Avatar
 
Join Date: Mar 2005
Posts: 445
Default Shows How Much I Know

Hi All,

Thanks to all who responded. Since the ID is unanimous and unequivocal, there can be no doubt that my suspicions were unfounded. Good to know. As unbelievable as it may seem, I bought the keris at a local flea market where I shop for used tools. When I saw it on the dealer's table, I couldn't believe my eyes.

Sincerely,
RobT
RobT is offline   Reply With Quote
Old 21st November 2022, 07:21 PM   #8
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,012
Default

Quote:
Originally Posted by RobT View Post
As unbelievable as it may seem, I bought the keris at a local flea market where I shop for used tools. When I saw it on the dealer's table, I couldn't believe my eyes.
It's funny how that can happen. I have also found a few keris and other SEA blades in some unexpected places. Often the price is right in these situations as well.
David is offline   Reply With Quote
Old 21st November 2022, 08:42 PM   #9
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,675
Default

Back in about 1980 I was in a warung in Pasar Triwindu in Solo, I was looking for stuff to buy, keris, or anything else of interest. They had a basket of junk, stuff that was going to be dumped because it was not worth the time needed to make it saleable.

There was a keris in this basket, a complete keris, but absolutely & completely a mess, the blade was thick with rust and had been twisted into a corkscrew shape and bent as well, it was tied to its wrongko with a bit of twine, the wrongko was deeply covered in filth and it was cracked, pendok bent and twisted.

I picked it up & asked how much, the dealer said;- "That's just rubbish, take it if you want it"

I took it.

I totally restored that keris, which involved taking it back to the forge and straightening it out. It turned out to be a very old, good quality Pajajaran keris, and the wrongko also came up beautifully.

Then there was the time I bought a pre-WWII Joseph Rogers two blade pocket knife with pick & tweezers complete with its plaited belt pouch. I bought this at an antiques fair for $5 --- oh yeah, it had never been sharpened.

If you just look for things often enough you do sometimes get lucky.

RobT got lucky.
A. G. Maisey is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.