helmet

Miles82 · 15th July 2014, 02:33 PM

hi! do you know something about this helmet? the datation, the type etc?

A Senefelder · 15th July 2014, 05:58 PM

Some pictures of the inside would be helpful in figuring this helmet out. Based on the little that can be gathered from the pics i'd say that this is unfinished whatever it is. It has the lines vaguely of a burgonet. It does not appear to have had the necessary small notch made nor the rivet holes for mounting the hinges that would affix the cheek plates. I can only make out two smallish paired flat headed rivets near the browline of the right hand front side which are not appropriate for holding in an entire liner and the helmet from what I can see has no other rivet holes for attaching one. There is a decent sized ding missing from the comb which gives the appearance of it being very thick. Do you know how much this weights? The comb appears from the profile picture to run all the way down the back of the helmet to its terminus at the neck which is an bit of an odd feature. Some crisp pics of the inside would be of some help.

Miles82 · 15th July 2014, 06:09 PM

other 2 pics... yes it's thick

Miles82 · 15th July 2014, 06:20 PM

other 2 pics...yes it si thicker

Miles82 · 15th July 2014, 06:45 PM

other 2 pics.. yes it si thicker

Timo Nieminen · 16th July 2014, 02:09 AM

My first thought was "fireman's helmet". The crest and deep neckguard are common features on them: http://en.wikipedia.org/wiki/File:Fi..._HallFlame.JPG

Modern infantry helmets don't have deep neckguards, since they'd get in the way when lying down. Doesn't look look like a pre-modern military helmet to me.

Miles82 · 16th July 2014, 06:19 AM

but i don't have find anything looks like firearms helmet too

kronckew · 16th July 2014, 09:11 AM

reminds me of a french taunting helmet.

15th July 2014, 02:33 PM	#1
Miles82 Member Join Date: Dec 2013 Posts: 9	helmet hi! do you know something about this helmet? the datation, the type etc? Attached Images

15th July 2014, 06:09 PM	#3
Miles82 Member Join Date: Dec 2013 Posts: 9	other 2 pics... yes it's thick Attached Images

15th July 2014, 06:20 PM	#4
Miles82 Member Join Date: Dec 2013 Posts: 9	other 2 pics...yes it si thicker Attached Images

15th July 2014, 06:45 PM	#5
Miles82 Member Join Date: Dec 2013 Posts: 9	other 2 pics.. yes it si thicker Attached Images

16th July 2014, 09:11 AM	#8
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,150	reminds me of a french taunting helmet. Attached Images

15th July 2014, 05:58 PM	#2
A Senefelder Member Join Date: Jul 2009 Posts: 214	Some pictures of the inside would be helpful in figuring this helmet out. Based on the little that can be gathered from the pics i'd say that this is unfinished whatever it is. It has the lines vaguely of a burgonet. It does not appear to have had the necessary small notch made nor the rivet holes for mounting the hinges that would affix the cheek plates. I can only make out two smallish paired flat headed rivets near the browline of the right hand front side which are not appropriate for holding in an entire liner and the helmet from what I can see has no other rivet holes for attaching one. There is a decent sized ding missing from the comb which gives the appearance of it being very thick. Do you know how much this weights? The comb appears from the profile picture to run all the way down the back of the helmet to its terminus at the neck which is an bit of an odd feature. Some crisp pics of the inside would be of some help.

16th July 2014, 02:09 AM	#6
Timo Nieminen Member Join Date: Mar 2012 Posts: 422	My first thought was "fireman's helmet". The crest and deep neckguard are common features on them: http://en.wikipedia.org/wiki/File:Fi..._HallFlame.JPG Modern infantry helmets don't have deep neckguards, since they'd get in the way when lying down. Doesn't look look like a pre-modern military helmet to me.

16th July 2014, 06:19 AM	#7
Miles82 Member Join Date: Dec 2013 Posts: 9	but i don't have find anything looks like firearms helmet too