African Takouba with early(?) European (?) blade

RSWORD · 24th October 2020, 04:37 PM

Hello. With some of the recent Takouba threads it got me thinking about a couple in my collection. My gut instinct says this is a pretty early European blade on this Takouba hilt, or at least what is remaining of it. The blade, when held vertical and I tap the pommel, rings like a tuning fork. It is a very well forged blade. The wide fuller from the forte and the thick shoulders of the blade along with the quality tempering make me think this is an early European blade. Would love to get some opinions. Thanks!

RSWORD · 24th October 2020, 04:38 PM

A few additional pictures.

TVV · 26th October 2020, 09:42 PM

It looks like an older European blade, but whether from the 19th century or earlier is for me personally hard to determine. Trade blades came in two main patterns, one of which included a single broader and shorter fuller. The fittings on the other hand look newer, from the 20th century. It is interesting to see the brass plates, which seem to serve an aesthetic rather than a structural purpose on this sword.

RSWORD · 28th October 2020, 01:42 AM

Thanks for the comments and thoughts about this blade.

Philip · 28th October 2020, 06:03 AM

Can you provide basic dimensions of the blade itself -- length, width at forte, width just below the point?

I'm intrigued at what might be under those brass plates, from the photos there appears to be some "lumpiness" especially on one side. Wondering if their presence is more than merely aesthetic, especially considering the complete lack of decoration.

Jim McDougall · 28th October 2020, 04:22 PM

It appears that in the construction of this takouba, the crossguard must have been damaged or broken away, leaving the remainder of the sword intact.
The blade is clearly European, and does seem early, of the broadsword type which saw use in schiavona and various types of sword in Europe.

While this type fuller resembles those on 17th century examples, it seems to have existed earlier as well of course, as a pretty standard form.
I think we can safely presume this blade is probably 17th century European especially with the character described with its tempering.

The metal plate is an affectation occurring on many Tuareg takouba and if I recall, I think the term is 'adabal' in description. Iain Norman has accurately described these as 'sandwich' type mounts, and suggests they were used in mounting damaged blades.
Here however, it seems clear that the blade did not require such support and the 'mount' was more decorative.

The question then becomes, were these metal plates (some iron,some brass) aesthetic or structural?

It would seem that as influences are spread culturally through diverse tribal expanses across the Sahel and Sahara, it might be a little of both. While in cases where structural integrity needed attention might have obviously placed these 'plates' accordingly, others may have seen them as decorative design features,offering more surface for decorative motif.

Perhaps it became simply a symbolic feature suggesting some sort of imbuement in the sword itself, as often the case with markings etc. which were seen as imbuements of magic and power.

We can only speculate on these factors of course, and any resultant theories would be mitigated by the character of the peoples using the weapons.
In many cases, the shapes of the blades,as well as the materials selected in the construction of each sword are symbolic factors as well.

RSWORD · 28th October 2020, 11:11 PM

Quote:

Originally Posted by Philip

Can you provide basic dimensions of the blade itself -- length, width at forte, width just below the point?

I'm intrigued at what might be under those brass plates, from the photos there appears to be some "lumpiness" especially on one side. Wondering if their presence is more than merely aesthetic, especially considering the complete lack of decoration.

Hey Philip,

The blade is 31 3/4". It is 2" wide at the shoulders and remains 2" wide at the bottom of the plate down to just pass the fuller. Then it begins to taper down to the tip. The pictures are a bit deceiving. There is no lumpiness. The plates are fairly flat on each side with a side panel on each side connecting the plates and there is some solder peaking out from some of the separation this side panel now has. Can't really see the blade beneath the plate but the one section I can see from the plate/panel separation it looks normal.

24th October 2020, 04:37 PM	#1
RSWORD Member Join Date: Dec 2004 Location: Greensboro, NC Posts: 1,083	African Takouba with early(?) European (?) blade Hello. With some of the recent Takouba threads it got me thinking about a couple in my collection. My gut instinct says this is a pretty early European blade on this Takouba hilt, or at least what is remaining of it. The blade, when held vertical and I tap the pommel, rings like a tuning fork. It is a very well forged blade. The wide fuller from the forte and the thick shoulders of the blade along with the quality tempering make me think this is an early European blade. Would love to get some opinions. Thanks! Attached Images

24th October 2020, 04:38 PM	#2
RSWORD Member Join Date: Dec 2004 Location: Greensboro, NC Posts: 1,083	A few additional pictures. Attached Images

26th October 2020, 09:42 PM	#3
TVV Member Join Date: Dec 2004 Location: Bay Area Posts: 1,598	It looks like an older European blade, but whether from the 19th century or earlier is for me personally hard to determine. Trade blades came in two main patterns, one of which included a single broader and shorter fuller. The fittings on the other hand look newer, from the 20th century. It is interesting to see the brass plates, which seem to serve an aesthetic rather than a structural purpose on this sword.

28th October 2020, 01:42 AM	#4
RSWORD Member Join Date: Dec 2004 Location: Greensboro, NC Posts: 1,083	Thanks for the comments and thoughts about this blade.

28th October 2020, 06:03 AM	#5
Philip Member Join Date: Dec 2004 Location: California Posts: 1,036	Can you provide basic dimensions of the blade itself -- length, width at forte, width just below the point? I'm intrigued at what might be under those brass plates, from the photos there appears to be some "lumpiness" especially on one side. Wondering if their presence is more than merely aesthetic, especially considering the complete lack of decoration.

28th October 2020, 04:22 PM	#6
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,739	It appears that in the construction of this takouba, the crossguard must have been damaged or broken away, leaving the remainder of the sword intact. The blade is clearly European, and does seem early, of the broadsword type which saw use in schiavona and various types of sword in Europe. While this type fuller resembles those on 17th century examples, it seems to have existed earlier as well of course, as a pretty standard form. I think we can safely presume this blade is probably 17th century European especially with the character described with its tempering. The metal plate is an affectation occurring on many Tuareg takouba and if I recall, I think the term is 'adabal' in description. Iain Norman has accurately described these as 'sandwich' type mounts, and suggests they were used in mounting damaged blades. Here however, it seems clear that the blade did not require such support and the 'mount' was more decorative. The question then becomes, were these metal plates (some iron,some brass) aesthetic or structural? It would seem that as influences are spread culturally through diverse tribal expanses across the Sahel and Sahara, it might be a little of both. While in cases where structural integrity needed attention might have obviously placed these 'plates' accordingly, others may have seen them as decorative design features,offering more surface for decorative motif. Perhaps it became simply a symbolic feature suggesting some sort of imbuement in the sword itself, as often the case with markings etc. which were seen as imbuements of magic and power. We can only speculate on these factors of course, and any resultant theories would be mitigated by the character of the peoples using the weapons. In many cases, the shapes of the blades,as well as the materials selected in the construction of each sword are symbolic factors as well.