Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > European Armoury

Reply
 
Thread Tools Search this Thread Display Modes
Old 2nd February 2018, 09:48 PM   #1
Kmaddock
Member
 
Kmaddock's Avatar
 
Join Date: May 2014
Location: Ireland
Posts: 532
Default Unusual gunpowder flask

Hi
I just picked up a job lot of items, interesting box of various shot and powder dispensers
All are standard enough mid to late 19 century
However this one has a mechanism I have never seen before
It is silver hallmarked on the neck of the flask but I think the main components are nickel
It looks as if you inverted the flask, opened the lever to dispense the powder, filled the cap and then the cap swivels through 90 degrees and you can then pour the powder into the gun.

Lots of mechanism and complicated to manafacture.
The retaining leaf spring to stop the cap from falling open is broken and the adjustment mechanism to allow various chardes to be dispensed is jamed

The flask itself is quiet rotten but the mechanism is overall not too bad.

The weight is in drams and it has the word patent on it so I assume English.

Can anyone shed some light on if this is a rarity, I def8nstely have never seen similar

If anyone can identify hallmarks I would be delighted to know any info in this regards as well

Regards

Ken

Size of flask is standard approx 150 mm rifle, shotgun flask
Attached Images
     
Kmaddock is offline   Reply With Quote
Old 3rd February 2018, 12:58 AM   #2
thinreadline
Member
 
thinreadline's Avatar
 
Join Date: Nov 2010
Location: Wirral
Posts: 1,204
Default

Quote:
Originally Posted by Kmaddock
Hi
I just picked up a job lot of items, interesting box of various shot and powder dispensers
All are standard enough mid to late 19 century
However this one has a mechanism I have never seen before
It is silver hallmarked on the neck of the flask but I think the main components are nickel
It looks as if you inverted the flask, opened the lever to dispense the powder, filled the cap and then the cap swivels through 90 degrees and you can then pour the powder into the gun.

Lots of mechanism and complicated to manafacture.
The retaining leaf spring to stop the cap from falling open is broken and the adjustment mechanism to allow various chardes to be dispensed is jamed

The flask itself is quiet rotten but the mechanism is overall not too bad.

The weight is in drams and it has the word patent on it so I assume English.

Can anyone shed some light on if this is a rarity, I def8nstely have never seen similar

If anyone can identify hallmarks I would be delighted to know any info in this regards as well

Regards

Ken

Size of flask is standard approx 150 mm rifle, shotgun flask
Any chance of a close up of the hallmarks Ken ?
thinreadline is offline   Reply With Quote
Old 3rd February 2018, 07:47 AM   #3
Kmaddock
Member
 
Kmaddock's Avatar
 
Join Date: May 2014
Location: Ireland
Posts: 532
Default

Hi
Here you go
I think Sheffield Tudor rose is the first mark
But I would be making a stab in the dark really
Cheers
Ken
Attached Images
 
Kmaddock is offline   Reply With Quote
Old 3rd February 2018, 09:11 AM   #4
corrado26
Member
 
corrado26's Avatar
 
Join Date: Dec 2014
Location: Black Forest, Germany
Posts: 1,164
Default

The "s" stands for the year 1854
corrado26
corrado26 is offline   Reply With Quote
Old 3rd February 2018, 09:45 AM   #5
Kmaddock
Member
 
Kmaddock's Avatar
 
Join Date: May 2014
Location: Ireland
Posts: 532
Default

Thanks Corrado
Am I correct in the Sheffield atributation?
Also have you ever seen a similar mechanism for powder dispensing.
I assume it was designed so that you did not have to put your thumb over the top of the spout, probably something a gentleman should not have to do to getting his thumb dirty.
But quiet a complex solution to a simple operation.
Regards
Ken
Kmaddock is offline   Reply With Quote
Old 3rd February 2018, 10:07 AM   #6
David R
Member
 
David R's Avatar
 
Join Date: Jan 2011
Posts: 1,048
Default

More of a safety measure I would think, in case of a lingering spark in the barrel.
David R is offline   Reply With Quote
Old 3rd February 2018, 11:22 AM   #7
corrado26
Member
 
corrado26's Avatar
 
Join Date: Dec 2014
Location: Black Forest, Germany
Posts: 1,164
Default

The first mark on the left probably is not the Tudor Rose, but the crown-mark of Sheffield. The listings found in the net show the silver hallmarks and I don't know wether these have been in use for brass too. So it is very uncertain to interpret their meaning.
The second mark from the left is certainly a "D", this and the next mark are unknown and the last one should be - if it were silver - the date letter "s", what in Sheffield stands for silver made in 1910. This date I think is very late, probably too late for the flask.
Attached Images
 
corrado26 is offline   Reply With Quote
Old 3rd February 2018, 12:09 PM   #8
fernando
Lead Moderator European Armoury
 
fernando's Avatar
 
Join Date: Dec 2004
Location: Portugal
Posts: 9,618
Default

Quote:
Originally Posted by Kmaddock
Hi
... I think Sheffield Tudor rose is the first mark ...
Maybe not likely. Hasn't the Tudor rose only appeared as from 1975 to present ?. Also the crown would have a different shape; and would stand upright .
There would be a different path towards deciphering those marks ... assuming they are for silver, and not for silver plate or another composition .
fernando is online now   Reply With Quote
Old 3rd February 2018, 01:34 PM   #9
thinreadline
Member
 
thinreadline's Avatar
 
Join Date: Nov 2010
Location: Wirral
Posts: 1,204
Default

If these are British silver hallmarks they dont really make much sense ... either that , of they are too worn for my eyes to make sense of them !
There has to be the following : a Standard mark ( to indicate it is Sterling Silver ) , a City mark , a Date Letter , and a Makers Mark. The makers mark , normally initials, always comes last & try as I may I cant discern anything from the last set of marks. Equally I am struggling to see a Standard Mark here , which would be a Lion Passant for this period ... w/o the standard mark , we are not dealing with silver and therefore cannot date it.
It may be silverplate ... which is well known for its 'lookalike' 'hallmarks' often enigmatically designed to mislead the buyer .
thinreadline is offline   Reply With Quote
Old 3rd February 2018, 02:53 PM   #10
Kmaddock
Member
 
Kmaddock's Avatar
 
Join Date: May 2014
Location: Ireland
Posts: 532
Default

I think you all are correct that it is a dubious mark to simulate a hallmark.
As for the mechanism has anyone seen examples of a similar set up before
Thanks for the interest.
Ken
Kmaddock is offline   Reply With Quote
Old 3rd February 2018, 04:28 PM   #11
fernando
Lead Moderator European Armoury
 
fernando's Avatar
 
Join Date: Dec 2004
Location: Portugal
Posts: 9,618
Default

Quote:
Originally Posted by Kmaddock
...As for the mechanism has anyone seen examples of a similar set up before ...
Not me. A bizarre system; a unique one ? for a determined purpose ?
fernando is online now   Reply With Quote
Old 4th February 2018, 03:53 AM   #12
Pukka Bundook
Member
 
Join Date: Jan 2007
Posts: 803
Default

As stated above, this type of top was a safety device, as occasionally 'normal_flasks would blow up on charging a barrel containing a spark.
Some tops looked like the regular, but were warranted fireproof.
This type of top appears to have been used more in France than the UK,.
Anyone with the Powder Flask Book will see many variations.
Sorry though, I don't own the book!

It's a nice one to have, and much scarcer than the usual types.
Pukka Bundook is offline   Reply With Quote
Old 4th February 2018, 01:03 PM   #13
Mel H
Member
 
Mel H's Avatar
 
Join Date: Oct 2017
Location: North East England.
Posts: 107
Default

Quote:
Originally Posted by thinreadline
If these are British silver hallmarks they dont really make much sense ... either that , of they are too worn for my eyes to make sense of them !
There has to be the following : a Standard mark ( to indicate it is Sterling Silver ) , a City mark , a Date Letter , and a Makers Mark. The makers mark , normally initials, always comes last & try as I may I cant discern anything from the last set of marks. Equally I am struggling to see a Standard Mark here , which would be a Lion Passant for this period ... w/o the standard mark , we are not dealing with silver and therefore cannot date it.
It may be silverplate ... which is well known for its 'lookalike' 'hallmarks' often enigmatically designed to mislead the buyer .
Yes, these are typical plate marks used on silver plated items produced in the 19th C. they don't generaly give much usefull information.
Quite often they have four letters which resemble 'hallmarks' which are E.P.N.S. meaning that the item is Electro Plated Nickel Silver. Another is E.P.B.M. a lesser quality product similar to pewter, Electro Plated Britania Metal.
I'm not sure that the manufacturers, many of whom were high class establishments, were deliberately trying to mislead the buyers or whether they were catering for a demand from buyers who preffered to own items that would appear to be more expensive than they were.

Check out my next post for an update on the makers marks

Last edited by Mel H; 4th February 2018 at 03:43 PM.
Mel H is offline   Reply With Quote
Old 4th February 2018, 01:51 PM   #14
Mel H
Member
 
Mel H's Avatar
 
Join Date: Oct 2017
Location: North East England.
Posts: 107
Default

Quote:
Originally Posted by Pukka Bundook
As stated above, this type of top was a safety device, as occasionally 'normal_flasks would blow up on charging a barrel containing a spark.
Some tops looked like the regular, but were warranted fireproof.
This type of top appears to have been used more in France than the UK,.
Anyone with the Powder Flask Book will see many variations.
Sorry though, I don't own the book!

It's a nice one to have, and much scarcer than the usual types.
I don't have the best known book by Riling but similar flasks appear the book by Martin Rywell but don't get much of a mention in the script, I've looked in a James Dixon of Sheffield catalogue from 1883 and it has clear drawing of this type of dispenser fitted to different styled bodies, one is listed as model No.5054, having a patent top.

Additionally with reference to the markings.
Quote From Martin Rywell.
Dixon & Sons. James Dixon was a firm founded in 1804, their mark was, Dixon, until 1806. From 1806 till 1830 their mark was a D and S separated by a rose.

Last edited by Mel H; 4th February 2018 at 03:47 PM.
Mel H is offline   Reply With Quote
Old 4th February 2018, 03:43 PM   #15
Pukka Bundook
Member
 
Join Date: Jan 2007
Posts: 803
Default

IT looks like you may well have cracked it, Mel!

I did not know that Dixon marked flasks in this manner.

I'm from Ormesby area. I see you too are from the NE.
Can I ask Roughly where?
Pukka Bundook is offline   Reply With Quote
Old 4th February 2018, 03:50 PM   #16
Mel H
Member
 
Mel H's Avatar
 
Join Date: Oct 2017
Location: North East England.
Posts: 107
Default

Quote:
Originally Posted by Pukka Bundook
IT looks like you may well have cracked it, Mel!

I did not know that Dixon marked flasks in this manner.

I'm from Ormesby area. I see you too are from the NE.
Can I ask Roughly where?
Hi there, I'm not far away, in Bishop Auckland.
Mel H is offline   Reply With Quote
Old 4th February 2018, 08:12 PM   #17
Kmaddock
Member
 
Kmaddock's Avatar
 
Join Date: May 2014
Location: Ireland
Posts: 532
Default

Thanks all for the information
Looks like I have picked up a rare beast, came with 5 leather shot dispensers and 3 other powder dispensers
All came in an RIC Barack’s box with a mixture of other items, handcuffs baton
The barrels off A double barrel percussion gun etc
Looks like a lot of maybe siezed ordinance and related items, all I was after was the handcuffs baton and pouch so nice to get a bonus item. The metal on the bottom of the flask is rotten through unfortunately
Cheers
Ken
Kmaddock is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:02 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.