Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Keris Warung Kopi

Reply
 
Thread Tools Search this Thread Display Modes
Old 7th April 2018, 02:06 PM   #1
alexish
Member
 
Join Date: Jun 2017
Posts: 127
Default Coteng restoration project

Last year, I bought a wooden coteng with broken beak, that was attached to a pandai saras blade, without a sheath. I decided to send this to Madura for restoration, as well as to make a new sheath. I hereby attach pictures of the broken coteng in its original state.
Attached Images
     
alexish is offline   Reply With Quote
Old 7th April 2018, 02:14 PM   #2
alexish
Member
 
Join Date: Jun 2017
Posts: 127
Default After restoration

Here are pictures of the broken coteng hilt after restoration.
Attached Images
   
alexish is offline   Reply With Quote
Old 7th April 2018, 02:19 PM   #3
alexish
Member
 
Join Date: Jun 2017
Posts: 127
Default

Here are pictures of the entire sarung and blade, with and without additional metalwork.
Attached Images
     

Last edited by alexish; 7th April 2018 at 02:33 PM.
alexish is offline   Reply With Quote
Old 7th April 2018, 02:29 PM   #4
alexish
Member
 
Join Date: Jun 2017
Posts: 127
Default New Coteng

I was so impressed by the restoration, that I got the same carver to make a brand new coteng with an old 9-luk pandai saras blade.
Attached Images
    
alexish is offline   Reply With Quote
Old 7th April 2018, 06:16 PM   #5
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,012
Default

Alexis, i am a little confused. You are show two different keris blades here as well, i believe, what appears to be two different hilts as well.
If you are looking for feedback on the hilt with the silver selut and the wavy blade, the beak replacement looks fairly good (though the photos are not good enough to really be able to tell if the repair shows), but the silver work on the selut seems really poorly fitted. The sheath itself seems to me a correct form, but seems a bit off proportionately. That could just be the angle of the photography though.
David is offline   Reply With Quote
Old 7th April 2018, 07:10 PM   #6
alexish
Member
 
Join Date: Jun 2017
Posts: 127
Default

Quote:
Originally Posted by David
Alexis, i am a little confused. You are show two different keris blades here as well, i believe, what appears to be two different hilts as well.
If you are looking for feedback on the hilt with the silver selut and the wavy blade, the beak replacement looks fairly good (though the photos are not good enough to really be able to tell if the repair shows), but the silver work on the selut seems really poorly fitted. The sheath itself seems to me a correct form, but seems a bit off proportionately. That could just be the angle of the photography though.
Actually, the 1st keris hilt is the restored antique piece (Posts 1, 2 & 3). The same Madurese carver who did the restoration subsequently attempted to carve a brand-new coteng hilt (second hilt, Post 4), using the 1st restored hilt (Posts 1, 2 & 3) as the template.
alexish is offline   Reply With Quote
Old 7th April 2018, 11:01 PM   #7
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,012
Default

So then the straight blade is yours, not the wavy one?
David is offline   Reply With Quote
Old 8th April 2018, 01:37 AM   #8
alexish
Member
 
Join Date: Jun 2017
Posts: 127
Default

Quote:
Originally Posted by David
So then the straight blade is yours, not the wavy one?
Both blades are mine. The first blade was found together with the broken coteng that was restored. I was so impressed by the restoration that I provided the Madurese carver with the second wavy blade to make a new Coteng hilt and sheath.
alexish is offline   Reply With Quote
Old 8th April 2018, 05:20 AM   #9
alexish
Member
 
Join Date: Jun 2017
Posts: 127
Default

Dear fellow collectors,

I have a question. The straight Pandai Saras blade was found glued to the broken Coteng, which was restored. Is it non-traditional or unusual to find a straight Pandai Saras blade associated with a wooden Coteng?
alexish is offline   Reply With Quote
Old 8th April 2018, 04:11 PM   #10
kai
Member
 
Join Date: Apr 2005
Posts: 3,213
Post

Hello Alexis,

Quote:
The straight Pandai Saras blade was found glued to the broken Coteng, which was restored. Is it non-traditional or unusual to find a straight Pandai Saras blade associated with a wooden Coteng?
No, not that I'm aware of. Many coteng come with blades of lesser quality; PS blades are not unheard of though.

BTW, your straight blade is not a typical PS blade either: it seems very stout.

Got it treated with warangan?

Regards,
Kai
kai is offline   Reply With Quote
Old 8th April 2018, 04:57 PM   #11
alexish
Member
 
Join Date: Jun 2017
Posts: 127
Default

Dear Kai,

when the straight pandai saras blade came to me, it was slightly rusted, with no pamor, and with typical appearance of a penisula keris.

However, when I sent it to Madura for restoration, it was subjected to Javanese-style warangan, which brought out its pamor, and gave it a "Javanese" appearance.
Attached Images
 
alexish is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.