Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Keris Warung Kopi

Reply
 
Thread Tools Search this Thread Display Modes
Old 25th November 2023, 02:59 PM   #1
mariec
Member
 
Join Date: Nov 2023
Posts: 2
Default Identification Assistance Requested - New Collector

Hi! I am new to the forum. Thanks go out to the admin for letting me in.

I was lucky enough to find my first keri. But, I do not know anything about it. I am hoping that the group can help me better understand the piece.

It is a 16" blade, 21.5" total length.

Thank you in advance for any assistance.
Attached Images
     
mariec is offline   Reply With Quote
Old 26th November 2023, 01:58 AM   #2
Sajen
Member
 
Sajen's Avatar
 
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,867
Default

Hello Mariec,

Welcome to the forum. To get a better understanding of the interesting blade I've played a little bit with your pictures. I am sure that you will receive some insights soon.
Attached Images
   
Sajen is offline   Reply With Quote
Old 26th November 2023, 10:30 AM   #3
Jean
Member
 
Join Date: Jun 2009
Posts: 1,740
Default

Helllo Mariec,
This looks like an old (19th century?) balinese blade of good standard although it would benefit from being cleaned & treated for improving the pamor contrast. The winged animal at the base (naga?) looks original to the blade from the pics but it could be more recent.
The wooden hilt in togogan "demon child" style is recent and of common quality.
A good catch for a first keris, congrats!
Jean is offline   Reply With Quote
Old 26th November 2023, 09:32 PM   #4
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,152
Default

I would have loved to have found this as my first keris. I agree with Jean pretty much based upon what i can see, though the winged figure seems more a Singo (lion) then a Naga (serpent). It's hard to be sure from your photos, but i agree that this figure appears to be original to this blade. I would say this could be more likely the earlier part of the 19th C than the latter. I would see how well you can clean this up with a bit of WD-40 and a good brushing with an old tooth brush.
It would be nice to see clearer, closer and better lit photos, especially of the figures at the base. I would like to get a better look at the smaller figure at the foot of the winged singo creature.
David is offline   Reply With Quote
Old 27th November 2023, 01:01 AM   #5
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,915
Default

The totogan child is not a demon, it is the god of children, I cannot remember his name, but he is a protector of children, certainly not a demon.

The lion on the blade might be a later addition, as Jean has noted, I'd need microscopic examination to know this or not. Later additions to blades are not necessarily a bad thing, they sometimes reflect the changes in custodianship of a keris.

The "stones" in the uwer might be plastic.

If you go with David's suggestion of WD40 and a good scrub --- & I endorse this --- it is probably a good idea to start with a good wash down and toothbrush scrub in the kitchen sink, using warm water & dishwash detergent, then soak the blade over a few days in WD40 & scrub with a hard brush --- not a brush with metal bristles, but a hard toothbrush or similar, then the dishwash detergent & warm water again, dry in the sun & a spray with WD40.

This is a very nice keris.

I think the very first thing I'd do would be to attack the spot of red rust at the tip with repeated applications of vinegar, using cotton buds.
A. G. Maisey is offline   Reply With Quote
Old 27th November 2023, 05:44 PM   #6
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,152
Default

Quote:
Originally Posted by A. G. Maisey View Post
The totogan child is not a demon, it is the god of children, I cannot remember his name, but he is a protector of children, certainly not a demon.

The lion on the blade might be a later addition, as Jean has noted, I'd need microscopic examination to know this or not. Later additions to blades are not necessarily a bad thing, they sometimes reflect the changes in custodianship of a keris.

The "stones" in the uwer might be plastic.

If you go with David's suggestion of WD40 and a good scrub --- & I endorse this --- it is probably a good idea to start with a good wash down and toothbrush scrub in the kitchen sink, using warm water & dishwash detergent, then soak the blade over a few days in WD40 & scrub with a hard brush --- not a brush with metal bristles, but a hard toothbrush or similar, then the dishwash detergent & warm water again, dry in the sun & a spray with WD40.

This is a very nice keris.

I think the very first thing I'd do would be to attack the spot of red rust at the tip with repeated applications of vinegar, using cotton buds.
Thanks Alan. Yes, i would also wash with warm soap and water first. I should have noted that. And i must comment you for spotting that red rust on the tip. I had to turn my screen brightness all the way up and i still could have missed it of i was not looking for it.
David is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:13 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.