Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Keris Warung Kopi
FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
Old 25th April 2018, 04:53 PM   #1
oracle_2010
Member
 
Join Date: Jan 2017
Posts: 6
Default Sepuh or ipuh in a keris

Sepuhan or ipuh in a keris

There are some variations in regards to applying sepuhan/ipuh in a keris blade. The most common sepuhan usually done from above the sor-soran to the tip of the keris which resulted in blackish coloration along the sepuhan part of the blade (as shown in the keris Bugis picture here). But there are also keris which are given sepuhan only on the tip (as shown in the keris Minang picture here). However, the common sepuhan which is done from above the sor-soran to the top can sometimes also bear different characteristic of coloration on the blade (as shown in the keris Pagaralam picture here: ribbon like pattern from above the sor-soran to the middle of the blade and blackish from the middle to the tip).

I also attached a page taken from a book in regards with "sepuhan" process in the keris making. It says that sepuhan may also be done using poison taken from various plants (called "sepuh racun") or using venom/poison originated from various animals (called "sepuh upas"). However, this is maybe a subject to dispute since "upas" itself leterally means a species of poisonous tree (Antiaris toxicaria) which is known to be used in Java (and maybe also in the other part of the archipelago?).

Also, the existence of a poisonous keris is always a subject to debate. Moreover, if the process of infusing the poison to the blade is done through "sepuhan" which involves very high temperature, enough to denaturate proteins found in the poison or venom originated from plants or animals.

It left us some questions:
1. Why there are different types of sepuhan in the keris?
2. What is the actual purpose of this "sepuhan" process in the keris making? Is it having the same purpose as "quenching" in the blade making or is there more purpose to it?
3. Is there literally exist a "poisonous keris"?

What is your view on this matter? Please let me know in the comment below.

Source:
Doyodipuro, KRHT Hudoyo. 1997. Keris: Daya Magic, Manfaat, Tuah, Misteri. Semarang: Dahara Prize.
Attached Images
     
oracle_2010 is offline   Reply With Quote
Old 26th April 2018, 09:34 PM   #2
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,024
Default

Quote:
Originally Posted by oracle_2010
It left us some questions:
1. Why there are different types of sepuhan in the keris?
2. What is the actual purpose of this "sepuhan" process in the keris making? Is it having the same purpose as "quenching" in the blade making or is there more purpose to it?
3. Is there literally exist a "poisonous keris"?
Hi Oracle. I was waiting for someone like Alan to come along to address your questions since he has far more experience in processes of forging than i do. I am sure if i get some of this wrong either he or someone else will correct me.
As i understand it sepuhan, when the word is applied to the keris forging process, it is the method of harding the blade to make it usable as a real weapon. Quenching would be the first part of that. Then the blade would be tempered, reheated at a somewhat lower themperature, to soften the hardening a little so that the steel is not so brittle and doesn't just crack in use.
These are different blades done by different smiths from somewhat different cultures at different times so it is not surprising that each smith applied this process to different degrees. Some may have felt that just hardening the tip was enough while others went further down the blade. Most keris smiths these days don't bother with this hardening process at all since there is always the risk of cracking and failing welds when to is applied. Since most modern keris are made to be seen for their artistry, not used as weapons, the hardening process becomes a risky and unnecessary step.
I see that you are still wondering about the concept of the poison keris. I believe the first thread you opened specifically on that subject answered those questions for you. Alan stated that he was aware of such a process down with snake venom i believe, though i do not believe it was commonly done with most keris.
Again, any poison that is added and then heated to a high degree in the hardening process would only be made ineffective by that process of heat. If people are saying that such a thing was done it is probably more legend than fact, or if it was done it was a useless procedure because the science of it would be faulty and invalidate the effects of any poison.
David is offline   Reply With Quote
Old 26th April 2018, 11:29 PM   #3
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,697
Default

I'm not at home David, moving around a bit, and pressed for time.

1. Why there are different types of sepuhan in the keris?

Different makers, different times, different objectives.

2. What is the actual purpose of this "sepuhan" process in the keris making? Is it having the same purpose as "quenching" in the blade making or is there more purpose to it?

As David has said, to make the blade usable as a weapon, however, a keris is not drawn after the initial quench, the fact that it is a laminated blade and that the iron/nickel pamor does not harden during the quench protects against fracture in use. Ferric material needs to contain carbon in order to harden. Steel contains carbon, iron does not, neither does nickel.


3. Is there literally exist a "poisonous keris"?

Any non-sterile keris plunged into your guts will poison you.

I have never heard of a sterile keris.
A. G. Maisey is offline   Reply With Quote
Old 27th April 2018, 01:17 PM   #4
oracle_2010
Member
 
Join Date: Jan 2017
Posts: 6
Default Small (dress?) Keris Minang with sepuhan on the tip

Hi David & Alan, thank you for your explanation.
By the way, the keris Minang pictured here is actually small one (the blade is less than 25 cm in length) and it got sepuhan on the tip part of the blade.

I have seen the previous thread which discuss the small keris or called keris selit in the Malay culture which is functioned as dressing companion. But judging from the sepuhan exist on the keris that I've shown you, is it possible that these small keris may have practical function (eg: as a weapon)?

I also attached picture of a tombak from Palembang with sepuhan only on the tip part.
Attached Images
    
oracle_2010 is offline   Reply With Quote
Old 27th April 2018, 02:33 PM   #5
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,024
Default

Quote:
Originally Posted by oracle_2010
Hi David & Alan, thank you for your explanation.
By the way, the keris Minang pictured here is actually small one (the blade is less than 25 cm in length) and it got sepuhan on the tip part of the blade.

I have seen the previous thread which discuss the small keris or called keris selit in the Malay culture which is functioned as dressing companion. But judging from the sepuhan exist on the keris that I've shown you, is it possible that these small keris may have practical function (eg: as a weapon)?

I also attached picture of a tombak from Palembang with sepuhan only on the tip part.
Hi Oracle. AFAIK Keris selit is specific certain areas of Malay culture. Minangkabau culture is distinctly different from the Malay cultures of the Peninsula as well as other cultures on Sumatra. I do not believe they have a tradition of keris selit as a dress function. From my understanding Minang keris tend towards the shorter side.
Keris are stabbing weapons so the most important area of the blade for harding would be the tip.
BTW, as with all new members, your posts go through moderation queue for a period of time before being posted to the forum. Please don't double post your replies. We check the moderation cue regularly and will pass your posts as quickly as possible. Thanks!
David is offline   Reply With Quote
Old 27th April 2018, 10:24 PM   #6
Gustav
Member
 
Join Date: Jun 2009
Posts: 1,196
Default

David, Negeri Sembilan on Malay Peninsula actually has very strong Minang roots.

Some quotes from Newbold, 1839:

"The inhabitants of the states in the interior of the southerly part of the Malayan peninsula, particularly those of Sungie ujong, or Simujong, Rumbowe, Johole, and Srimenanti, derive their origin from the parent empire of Menangkabowe, in Sumatra, more directly than the natives of the neighbouring states."

"Sir S. Raffles, in a letter to Mr. Marsden, thus notices the state of Rumbowe: "Inland of Malacca, about sixty miles, is situated the Malay kingdom of Rumbowe, whose Sultan, and all the principal officers of state, hold their authority immediately from Menangkabowe, and have written commissions for their respective offices. This shows the extent of that ancient power, even now reduced as it must be in common with that of the Malay people in general. I had many opportunities of communicating with the natives of Rumbowe, and they have clearly a peculiar dialect, resembling exactly what you mention of substituting the final o for a (...). In fact, the dialect is called by the Malacca people the language of Menangkabowe."
The forgoing remarks apply equally to the three adjoining states, Sungie-ujong, Johole, and Srimenanti, and, as has been aqlready observed, to Naning. It is also worthy of remark, that in the ancient records of the Dutch, preserved in the archives of Malacca, the natives of Rumbowe and Naning are invariably styled "Menangkabowes".

The Malacca Straits and even interior parts of Sumatra and Malay Peninsula for a long time have been an incredible mix of ethnic groups, and this we see mirrored also in Keris.

Regarding Keris Selit, here an old interesting thread, which mentions several restrictive bans as a possible purpose of their emergence. Unfortunately it leaves us without proper facts:

http://www.vikingsword.com/vb/showthread.php?t=273

Knowing the character of Malay people, I can imagine them used as actual weapons, at least in 19th cent.
Gustav is offline   Reply With Quote
Old 28th April 2018, 12:25 AM   #7
kai
Member
 
Join Date: Apr 2005
Posts: 3,215
Smile

Quote:
Originally Posted by oracle_2010
1. Why there are different types of sepuhan in the keris?
Well, given your nick, I rather expect you to tell us!


Quote:
2. What is the actual purpose of this "sepuhan" process in the keris making? Is it having the same purpose as "quenching" in the blade making or is there more purpose to it?
My vote goes to quenching, for sure.

There certainly could be additional layers: e. g. talismanic features, imbued magic(k)/spells/"power", etc. In a ritual setting it may make "sense" to add poison even if it got biologically inactive from the heat while quenching.


Quote:
3. Is there literally exist a "poisonous keris"?
As Alan pointed out, serious wounds would be tough to survive in any traditional culture, anyway. Poison was widely utilized for hunting in SEA and also part and parcel of fighting but would need to show effects very quickly to be of any practical use during infighting.

Regarding your question, this will certainly depend on culture, time period, and additional conditions. I do believe we can exclude any pusaka keris from a Jawa kraton to get poisoned - the mere thought seems akin to blasphemy. However, a coastal pirate preparing for a raid may have had a completely different mindset a few centuries back...

Regards,
Kai
kai is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.