Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Ethnographic Weapons
FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
Old 17th August 2012, 01:43 PM   #1
T. Koch
Member
 
T. Koch's Avatar
 
Join Date: Jul 2012
Location: Mother North
Posts: 189
Default New mandau

Hi everybody,

I’d like to share my new mandau with you all and if possible get some feedback as to the style of carving or anything else that you feel may be of value. I’ve recently focused my interest from the Asmat of New Guinea to Borneo, so I’m trying to learn as much as I possibly can about the cultural background of the Dayak peoples. On to the Mandau, here are the dry specs:

Overall length: 73 cm

Blade length: 58 cm

Thickness at spine: 7 mm

It was described by the seller as an Iban Mandau from the mid-20th century. Based on the pre-sale pictures I was a little nervous – particularly about the scabbard: In the pictures, the scabbard patina looked suspiciously like the standard “patina” that I’ve seen applied to “antique” Philipine tourist trinkets. Upon reception however, I was pleased to see that the scabbard has good patina and realistic signs of heavy wear. I now think the scabbard is at least from the same period if not original to the blade. It comes without both the small knife (ilang, right?) and belt attachment, however, as far as I know this is not unheard of concerning 20th century mandaus?

The handle is carved from one piece of wood with wound brass thread and tufts of hair like only humans grow them. It seems as if the tufts come from 4 different individuals or at least from 4 different locks. The handle is in very good condition with only minor damage – one of the bottom leeches on one side has broken off, but the damage is very old and now almost invisible.

The blade has a fileworked spine and 7 round brass plugs near the tip. Just above the ricasso, the blade is incised with several bands and two additional brass plugs. Although it is hard to see in the image, the spine of the blade is actually not straight, but slightly concave… This puzzles me a bit, as I thought that mandaus by definition had a straight spine, while only jimpuls have a curved one? If anybody could elaborate on this, I would be very grateful!

Anyway, I hope you like the photos and I’ll appreciate any input. I wish you all the best of weekends and for those among us celebrating the Eid these days – I wish you an awesome feast too!



All the best, - Thor





Handle.


Other side of handle - note broken off leech.


- a candidate for the 'Mandau Face Gallery'? - note broken leech in lower left side.


Up close.


More handle.


Ends - note brass plugs and broken off scabbard tip.
T. Koch is offline   Reply With Quote
Old 18th August 2012, 05:15 AM   #2
Maurice
Member
 
Maurice's Avatar
 
Join Date: Jan 2007
Location: The Netherlands
Posts: 1,324
Default

Quote:
Originally Posted by T. Koch
I’d like to share my new mandau with you all and if possible get some feedback as to the style of carving or anything else that you feel may be of value. I’ve recently focused my interest from the Asmat of New Guinea to Borneo, so I’m trying to learn as much as I possibly can about the cultural background of the Dayak peoples.
Let's try to answer some of your questions.
It's very difficult to tell something about the style of carvings etc as it can be very complex and there were a lot of different tribes (wether related to eachother or not).
The best thing to learn more about this is for instance to use the "search" function on "mandau" in this forum.
Some of the best mandaus had been discussed here in the past.
Besides that, reading old articles and visits to museums (and databases) are a great resource to learn more about mandaus (However the provenance/origin of the museumpieces aren't described very well often and sometimes even totally wrong, it's good to learn/study the old style as the date of collecting often is noted).
But beware digging deep into this matter.... it's very addictive.
Another source: http://www.ethnographicswords.com/

As there were many tribes in Borneo, it's not possible to unravel everything and to learn everything known in short time. Even the senior collectors amongst us have difficulties to nail down the exact tribe of mandaus which show up sometimes.

I've written a very general (not too long and technical) article about mandaus , which suits reading and studying perfectly for collectors who are trying to learn more about mandaus in general. However there's one problem....... I wrote it in Dutch and have no time (and not liking at the moment) to give it a proper translation into English......





Quote:
Originally Posted by T. Koch
It was described by the seller as an Iban Mandau from the mid-20th century. Based on the pre-sale pictures I was a little nervous – particularly about the scabbard: In the pictures, the scabbard patina looked suspiciously like the standard “patina” that I’ve seen applied to “antique” Philipine tourist trinkets. Upon reception however, I was pleased to see that the scabbard has good patina and realistic signs of heavy wear. I now think the scabbard is at least from the same period if not original to the blade. It comes without both the small knife (ilang, right?) and belt attachment, however, as far as I know this is not unheard of concerning 20th century mandaus?
Mid 20th century would be very early to estimate your mandau, and probably (but that's my opinion) it's made more recently, and wouldn't go earlier as a few decades max. (judging the handle and the scabbard).
Both handle and scabbard don't raise the feeling to me of good patina and signs of wear.
The blade is another story. It looks older as the "dress". Maybe you can post an image of the decoration (if there is any) on the shoulder of the blade? (between the handle and the cutting edge of the blade).





Quote:
Originally Posted by T. Koch
Although it is hard to see in the image, the spine of the blade is actually not straight, but slightly concave… This puzzles me a bit, as I thought that mandaus by definition had a straight spine, while only jimpuls have a curved one? If anybody could elaborate on this, I would be very grateful!
Not only jimpuls have curved blades. There are a lot of other Borneo swords (with different names) which have curved blades and are no jimpuls (search on jimpul in the database).
As a rule you can call a Borneo sword a mandau when it's concave at the innerside and convex at the outside (according specific tribes called "parang ilang", "malat" or "baieng").


Maurice
Maurice is offline   Reply With Quote
Old 19th August 2012, 05:51 AM   #3
VANDOO
(deceased)
 
Join Date: Dec 2004
Location: OKLAHOMA, USA
Posts: 3,138
Smile

THE HANDLE ON YOUR EXAMPLE IS A TRADITIONAL FORM I HAVE SEEN BEFORE BUT THE CARVING ON THE SCABBARD IS ONE I HAVE NOT SEEN.
A CLOSE UP ON THE FORTE OF THE BLADE MAY BE HELPFUL FOR IDENTIFICATION IF IT HAS ANY DESIGN OR CARVING , IF ITS JUST RUST NO PICTURE IS NEEDED. A CLOSEUP OF THE WIRE WRAP COULD HELP TO DETRERMINE IF ITS NEW OR OLD AND A CLOSEUP OF THE SCABBARD CARVING MAY BE OF USE TOO. THE BLADE LOOKS TO BE A GOOD HEAVY ONE IN A PROPER MANDAU FORM.
NOT MUCH HELP BUT THEN I AM JUST A BEGINNER ONLY BEEN COLLECTING THEM FOR 30 YEARS OR SO AS FAR AS DAYAK WEAPONS ARE CONCERNED THATS A BEGINNER UNLESS THAT IS YOUR ONLY INEREST AND YOU SEARCH TIRELESLY FOR INFORMATION.
VANDOO is offline   Reply With Quote
Old 20th August 2012, 12:18 PM   #4
T. Koch
Member
 
T. Koch's Avatar
 
Join Date: Jul 2012
Location: Mother North
Posts: 189
Default

Hi guys and thanks for your feedback!

Maurice, yes, this forum is packed with good threads on Bornean blades and I'm all over them already! Your site is also really nice, and I've had much pleasure from Roth's text - thank you for making that available! I would also LOVE to receive a copy of your article - even though its in Dutch. - I don't know if you've ever talked to a Dane while drunk, but I can assure you that Danish and Dutch are actually quite understandable if in writing or if both parties speak slow. - I have plenty of academic articles to trade with, let me know if you're looking for something in particular!

Vandoo, thank you for your input - I really appreciate it! I know what you mean and I think we have similar outlooks on life: I've been going to school for the last 24 years now and I feel as dumb as ever!

Regarding age, I'm really not an antique-nazi when it comes to my collection. I let my taste guide me and as long as a piece is made for actual use and for one of a thousand possible reasons tickels that soft spot in my belly, I don't really care how old it is. This little guy is a charmer!

I'll for sure get some better pictures taken of the ricasso area and the brass windings. Would be great if the origin could be narrowed down to an area or culture.


Thanks again and all the best, - Thor
T. Koch is offline   Reply With Quote
Old 20th August 2012, 09:35 PM   #5
Maurice
Member
 
Maurice's Avatar
 
Join Date: Jan 2007
Location: The Netherlands
Posts: 1,324
Default

Quote:
Originally Posted by T. Koch
Maurice, yes, this forum is packed with good threads on Bornean blades and I'm all over them already! Your site is also really nice, and I've had much pleasure from Roth's text - thank you for making that available! I would also LOVE to receive a copy of your article - even though its in Dutch. - I don't know if you've ever talked to a Dane while drunk, but I can assure you that Danish and Dutch are actually quite understandable if in writing or if both parties speak slow. - I have plenty of academic articles to trade with, let me know if you're looking for something in particular!
This forum has very good threads about Bornean blades! You can also see the differences between the authentic old ones, authentic newer ones, and the touristic ones, when scrolling through all threads.
I don't think I would be able understanding a drunk Dane and he wouldn't probably understand me, but I can forward you the article. (I did send you a pm with my emailaddress).
I don't need anything in return. But if you have some academic articles about Borneo, I would like to read them if you would be so kind sharing them with me.



Quote:
Originally Posted by T. Koch
I"ll for sure get some better pictures taken of the ricasso area and the brass windings. Would be great if the origin could be narrowed down to an area or culture.
Brass windings were used on old mandaus but also on new mandaus. It would be hard to determine the age on the brass wire (and almost impossible) as it could be cleaned also.
Your mandau is a mandau from Sarawak, probably Iban tribe in my opinion.

Rg,
Maurice
Maurice is offline   Reply With Quote
Old 20th August 2012, 09:43 PM   #6
asomotif
Member
 
asomotif's Avatar
 
Join Date: Nov 2006
Location: The Netherlands
Posts: 2,221
Default

Hello Thor,

Nice to see you presenting this mandau on the forum.
Once Maurice steps in any comment from my side becomes futile

Can you post a picture of the blade decoration near the handle ?
And maybe a picture of teh 2 faint fullers on the blade ?

Thanks and best regards,
Willem
asomotif is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.