Red rust

grendolino · 31st December 2017, 04:29 PM

Dear guys. Sorry to bother on The Edge od The years but let me Ask a practical question: does true oriental sword corrodes in red rust or is it the sign of poor modern Steel?
I am following The auction of The nice shamshir in mediocre condition with nice quillon nad proper blade appearance but a bit rusty. Thus i can't refer to pictures.

Battara · 2nd January 2018, 05:30 AM

Red rust is active rust and must be eliminated. Black rust is more stable.

mariusgmioc · 2nd January 2018, 10:42 AM

Yes, red rust is recent, active rust that is progressing fast into healthy metal. It appears on both old and new blades.

Black-ish rust is stable ( does not progress into healthy metal) and even offers some protection agaist red rust.

However, while black-ish rust can be seen as a sign of age as it takes more years to develop (but it can appear also after about 4-5 years) red rust can appear at any time and cannot provide any indication about the age of the blade.

HAPPY NEW YEAR!

Marius

grendolino · 2nd January 2018, 05:55 PM

Thank you, gentlemen

OsobistGB · 2nd January 2018, 08:46 PM

Unfortunately, the presence of red rust is often a sign of artificial aging.Counterfeiters use hydrochloric acid to process the metal and the presence of red rust is a warning sign.Even in the most renowned European and American auctions are offered fakes.

Robert · 3rd January 2018, 01:54 AM

While that might have been true in the past and without going into detail most counterfeiters of antique edged weapons now are well beyond using any method that produces red rust unless they are using it as the first process in the creation of an artificial antique finish. Most red rust that you will encounter is usually a result of improper cleaning and handling, poor storage preparation or conditions or a combination of any of these things. I have found that a close inspection of how an item was made and the materials used in its construction can tell you more about its authenticity than depending on the color of any rust that might be present ever could. Quite a few sellers do not and will not clean an item before offering it for sale, but would rather let the new owner decide what if anything should be done.

Best,
Robert

Sajen · 3rd January 2018, 11:47 AM

Any steel can show red rust, antique or new one and can't be a proof of authenticity! But black rust "can" be a sign of good age.
And I agree with everything Robert and Marius have stated!

Fernando K · 3rd January 2018, 02:13 PM

Hello

With the little that is of chemistry, I know that there is no inactive oxide. Even the black oxide (ferrous-ferric) of the blued, continues to act if it does not receive a conservation treatment. What happens is that it continues its action below the surface of the metal, and its action is not seen, and it is very slow

Fernando K

31st December 2017, 04:29 PM	#1
grendolino Member Join Date: Sep 2015 Posts: 37	Red rust Dear guys. Sorry to bother on The Edge od The years but let me Ask a practical question: does true oriental sword corrodes in red rust or is it the sign of poor modern Steel? I am following The auction of The nice shamshir in mediocre condition with nice quillon nad proper blade appearance but a bit rusty. Thus i can't refer to pictures.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2nd January 2018, 05:30 AM	#2
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,139	Red rust is active rust and must be eliminated. Black rust is more stable.

2nd January 2018, 10:42 AM	#3
mariusgmioc Member Join Date: Sep 2014 Location: Austria Posts: 1,869	Yes, red rust is recent, active rust that is progressing fast into healthy metal. It appears on both old and new blades. Black-ish rust is stable ( does not progress into healthy metal) and even offers some protection agaist red rust. However, while black-ish rust can be seen as a sign of age as it takes more years to develop (but it can appear also after about 4-5 years) red rust can appear at any time and cannot provide any indication about the age of the blade. HAPPY NEW YEAR! Marius

2nd January 2018, 05:55 PM	#4
grendolino Member Join Date: Sep 2015 Posts: 37	Thank you, gentlemen

2nd January 2018, 08:46 PM	#5
OsobistGB Member Join Date: Feb 2017 Posts: 86	Unfortunately, the presence of red rust is often a sign of artificial aging.Counterfeiters use hydrochloric acid to process the metal and the presence of red rust is a warning sign.Even in the most renowned European and American auctions are offered fakes.

3rd January 2018, 01:54 AM	#6
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	While that might have been true in the past and without going into detail most counterfeiters of antique edged weapons now are well beyond using any method that produces red rust unless they are using it as the first process in the creation of an artificial antique finish. Most red rust that you will encounter is usually a result of improper cleaning and handling, poor storage preparation or conditions or a combination of any of these things. I have found that a close inspection of how an item was made and the materials used in its construction can tell you more about its authenticity than depending on the color of any rust that might be present ever could. Quite a few sellers do not and will not clean an item before offering it for sale, but would rather let the new owner decide what if anything should be done. Best, Robert

3rd January 2018, 11:47 AM	#7
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,466	Any steel can show red rust, antique or new one and can't be a proof of authenticity! But black rust "can" be a sign of good age. And I agree with everything Robert and Marius have stated!

3rd January 2018, 02:13 PM	#8
Fernando K Member Join Date: Apr 2010 Posts: 663	Hello With the little that is of chemistry, I know that there is no inactive oxide. Even the black oxide (ferrous-ferric) of the blued, continues to act if it does not receive a conservation treatment. What happens is that it continues its action below the surface of the metal, and its action is not seen, and it is very slow Fernando K