|
14th November 2023, 11:33 PM | #1 |
Member
Join Date: Mar 2005
Posts: 456
|
Date?
Hi Marc M,
In the first blade close-up, I think the first four characters are a date. The first three digits appear to be 198. I think the last digit may be a 3. I don't know what the rest of the characters are. Sincerely, RobT Last edited by RobT; 14th November 2023 at 11:35 PM. Reason: clarification |
15th November 2023, 01:50 AM | #2 |
Member
Join Date: Aug 2007
Location: CHRISTCHURCH NEW ZEALAND
Posts: 2,730
|
If you have the skill, I would definitely say restore the handle, especially since you have some ivory to do it.
Stu |
15th November 2023, 09:57 AM | #3 |
Member
Join Date: Aug 2019
Location: Belgium
Posts: 116
|
|
18th November 2023, 10:30 AM | #4 |
Member
Join Date: Jan 2012
Posts: 402
|
I think they are all numerals 1983/3/16
Regards Richard |
18th November 2023, 01:06 PM | #5 |
Member
Join Date: May 2014
Location: Ireland
Posts: 533
|
Hi
What's the plan as I cant see how the piece of ivory will be big enough for the job at hand I found a hand fret saw is very good at cutting ivory with minimal wastage. Regards Ken |
18th November 2023, 11:53 PM | #6 |
Member
Join Date: Mar 2005
Posts: 456
|
Good Catch
Richard G,
I can see where you are going. The symbol after the first "3" is merely a slash to separate the year from the month and likewise, the symbol after the second "3" is a slash that separates the month from the day. I will keep this in mind for the future. Sincerely, RobT |
19th November 2023, 09:45 AM | #7 | |
Member
Join Date: Aug 2019
Location: Belgium
Posts: 116
|
Quote:
I made a mould out of cardboard and am going to cut it out with a scroll saw for model making. the ivory bird is slightly thicker than the part to be repaired. i will fill the cracks with ivory powder and glue and touch up. Best regards Marc |
|
19th November 2023, 09:52 AM | #8 |
Member
Join Date: Aug 2019
Location: Belgium
Posts: 116
|
|
20th November 2023, 12:26 PM | #9 |
Member
Join Date: May 2014
Location: Ireland
Posts: 533
|
Hi Marc,
I see where you are going with the repair and looks like you have enough material alright. Will you put a pin in the handle to locate the part in situ while sanding down and give solidity to the join, also how are you going to blend the new "C" shaped part into the existing. I never like cutting the original part but the shaping of new to old looks very jagged, are you tempted to make the jagged part more uniform by cutting out some of the broken part? Take pictures as you go along if you have a chance. Regards, Ken |
20th November 2023, 03:05 PM | #10 | |
Member
Join Date: Aug 2019
Location: Belgium
Posts: 116
|
Quote:
Good idea to use a pin, i hadn't thought of that because i'm going to use two component glue and it should be strong enough. Will not take anything off the original and try to make the new piece as fit as possible and fill the rest with glue and and ivory dust. Will take pictures during the process. Best regards Marc |
|
15th November 2023, 09:50 AM | #11 | |
Member
Join Date: Aug 2019
Location: Belgium
Posts: 116
|
Quote:
Thank you for the translation. Sincerely Marc |
|
|
|